I'm Stuck - And Misaligned
Please look at the page below and tell me why my wife, on her PC, is seeing a misaligned design (it looks fine on my Mac). The black bar at the top, with my name in it, should line up with the rest of the page below it. Everything should be on the far left of the page. But my wife's PC sees the black bar to the left (where it should be) while the rest of the page below is shoved way out to the right.
How do I get the main page elements back over to the left? (I've tried "align left" for that table).
http://www.keithclementson.com/store/
Thanks!
This is a very strange problem! After playing for long, long time with your code I figured out a couple of things.
1. I gave the "container" div a background color and noticed that even if it correctly surrounded the tables in the code, it didn't show under anything else than your name. VERY strange!! You might as well have put the tables outside the div!
2. The next step was to remove everything except a single row in each table to make the page as simple as possible.
3. Still the same problem, so I added a new table in DW (to the container area), and it turned out okay.
4. The last step was to remove all the values for cell spacing, cell padding, etc from the table in line 54, and now it worked! The table is now behaving like it's supposed to do when surrounded by the "container" div.
So my suggestion is that you move all the table control values from the html and into the CSS.
The only thing that was different with the table I added in DW was that it didn't contain any html values (except for width). This is a strong indication of the problem originating at that spot in the code.
This problem didn't show up until I gave the div a background color, what I saw then indicated that a browser (with a bug) could misunderstand the layout and give you a problem like the one you mentioned.
I'm pretty sure I found "the glitch".
Good luck!
Similar Messages
-
Syncing iphone and now phone is stuck and wont power off or do anything
syncing iphone and now phone is stuck and wont power off or do anything
Reboot the phone: hold down the power button and the home button at the same time until you see the Apple logo. Ignore the "slide to shut down". When the screen has been completely black for a few minutes, press the power button again.
-
Firefox connects to google-analytics for some sites,when i click on links in websites or emails and then gets stuck, and I can never get onto the site. Or opens a new bower behind the one i'm usind that's blank i don't even know it's there untill i close the one i'm using. How do I prevent Firefox from connecting to google-analytics? Or opening a blank bowser behind the one i'm using. I use XP with service pak 3 in English
== This happened ==
A few times a week
== a couple months agoI got the same issue.
I go on a website and all the sudden another window pops up with "results.google-analytics.com" or "search.google-analytics.com". It has often ads for other sites for example. black single dating site
how can I can I stop that from happening again?
I didn't download or do anything, just visit websites, that I visit on a regular basis.
OS: Windows XP
Firefox Version: 3.6.6 -
My Iphone 3s is stuck and will not open, I have an image of a USB cord with an arrow pointing up to the Itune music Icon and my phone won't open or be recognized by itunes or my computer. What do I do now?
Try restoring it using Recovery Mode.
-
Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.
Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk. I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work. The dock seems to be just fine and all the apps seems to run just fine. When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open.
Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does.
Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
All of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
I am running Java and Adobe Player because some of the sites I go to a lot require both.I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results! -
In my iTunes on the iPad I've got 95 things that are stuck and I tried swiping them to delete them but it doesn't work dose any one know how to empty the download tab
Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
Thanks again,
Rob -
My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?
JesusDGZ wrote:
My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?
I have no clue what you mean by "all the different methods." Here are my suggestions.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
MAcbook is stuck and will not shutdown following download of X Mavericks software. Setup assistant is stuck and will not allow the MacBook Air to shutdown. It's been doing this for over 5 hours......any ideas?
Hi there—
This reply doesn't seem to take into account the query.
Please help?
The computer is completely unresponsive and won't shut down or turn off. It is stuck in Set Up Assistant after trying to sign in to AppleID.
Attempting to shut down or restart produces the following dialogue:
"The application Set Up Assistant has cancelled shut down.
To try shutting down again, quit Setup Assistant and click Try Again."
HOWEVER it is impossible to quick Set Up Assistant— the icon is completely unresponsive even to force quit, right click or anything.
I've managed to get into being able to see Dashboard and at the top Desktop and the dock below. But I can't click on anything from there. So it seems it is not the whole computer. Just set-up assistant.
Please help??
Thank you -
while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?
Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808 -
A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! I have done this a few times and nothing seems to work! HELP! :/
Transfer all of your content to the computer:
Tunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
http://support.apple.com/kb/HT1848
Then try turning the device off and on again. I'd leave it off for 10-15 minutes, but that is up to you:
http://support.apple.com/kb/HT1430
If the item is still there, you may need to restore the device:
http://support.apple.com/kb/HT1414
Hope that helps . Worst case scenario, you may need to write into iTunes support to see if they can also help!! -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
It sounds a lot like your phone was hacked or jailbroken to unlock it prior to your trying to update it.
If that is the case, it is nowpermanently bricked. -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
tariqrehmani wrote:
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. ...
The iPhone 3G is Not Compatible with iOS 6...
It also appears that your phone may have been Hacked and / or Jailbroken...
If this is the case... you are out of luck... Because...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743 -
Media browser should open a folder, but stucks, and giving an endless spinning ball
media browser should open a folder, but stucks, and giving an endless spinning ball. How can I reset at startup Pages?
What have you got in the folder?
It may simply be large and numerous, with possibly graphics that need to be converted like .eps, .ai, .bmp etc and it takes time to open, particularly if you don't have enough memory on a slow machine.
Peter -
my iphone5 has keypad issue which is getting stuck and the display starts blinking the phone doesn't respond until it's turned off n switched on what might be the solution ???
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
My power button is stuck and doesn't turn the phone off or on anymore. Can anyone help?
My power button is stuck and doesn't turn the phone off or on anymore. Can anyone help?
What would you like us to do? We can't unstick it for you.
Bring your phone into Apple for replacement.
Maybe you are looking for
-
We're deploying new Dell pc's. Unfortunately we have a large existing install base of Office Home and Business in the field due to customers buying Office bundled on Dell machines. Buying Open License Outlook licenses is more cost effective than upg
-
How to highlight a single row in the Table components
Hi, I am trying to do the following : 1) Select a staff member's name from a dropdown list 2) click on dropdown.name and show all the projects the member is working in a Table1 3) when clicked on the project in Table1, show all team members of select
-
Retrieve data from a non-peoplesoft application using HTTP Get
I need to retrieve data from a non-peoplesoft application. They want us to submit a HTTP GET request to their URL with a series of parameters. I am thinking about using HTTP Targert connector to accomplish this. Does anyone have sample peoplecode? Cu
-
Should background be in container
In creating the site below I have set the full background image into the workspace but not placing it in a container. The site seems to work without the background being in a container but I am concerned that without having in a container I am creati
-
Hi, I have a LOV in the table column. I want to disable/enable the LOV on the basis of the values of other column. How can i do that? My JDeveloper version is 11.1.1.6.0 Thanks -Harish