I'm suddenly getting two duplicate windows of everything.

Two conky displays, two Dolphin windows, two compose windows in Thunderbird....   This is an up-to-date, 64bit KDE install...  What could be going on here?

Does this persist if you create a new user?

Similar Messages

  • When I upload files and correct in lightroom then I export to another named file I keep getting two duplicates. numbered 1 and 2. this never happened before

    When I upload files and correct in lightroom then I export to another named file I keep getting two duplicates. numbered 1 and 2. this never happened before

    When I first upload to lightroom I set up a file called new photos. When I correct them I export to a newly named file. But when I go to the newly named
    File on my harddrive there are duplicate files
    Stan

  • All of the sudden I am getting two windows when clicking on a link in Facebook. How can I stop this from happening? Please HELP

    Today I discovered that when I was in facebook, and clicked on a link, anywhere, I would get a blank window and then another window would open up and have the links information on it. Things are really slow with this happening. I've checked out the popup tab, and I don't have it checked. There is nothing in the list either. PLEASE help me get rid of this problem. I have uninstalled firefox and reinstalled it. Would downloading an older version help?? Thank you for any help you can give me.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • TS4463 I am using Windows Vista with Outlook 2007 and iCloud.  Everything has been great until this morning.  I'm suddenly getting the message "Set of folders cannot be opened.  The information store could not be opened.

    I am using Windows Vista with Outlook 2007 and iCloud.  Everything has been great until this morning.  I'm suddenly getting the message "Set of folders cannot be opened.  The information store could not be opened.  I tried running the repair utlity to repair the iCloud however I am still getting this error message.

    I tried rebooting.  It didn't change anything.

  • How do i open a new duplicate window? Two windows with the same content.

    Hello, I am switching from IE8 to Firefox. We need to be able to open a new window with the same page displayed instead of going to my homepage. In IE it's called "Open A New Duplicate Window". This feature is very important to us using two screens for web development. Thanks

    in the address box, click and drag the address to the plus sign on the new tab above, it will open a duplicate tab

  • How do you stop the welcome to firefox 4 screen from coming up every time I open firefox? I get two tabs, one the welcome window, then my home page. How do you stop the bloody welcome screen?

    How do you stop the welcome to firefox 4 screen from coming up every time I open firefox? I get two tabs, one the welcome window, then my home page. How do you stop the bloody welcome screen?

    Its not my home page, Like I said, I hae my home page also come up in a different tab (google) I also get the welcome to FF4 on a seperate tab. My home page is set to google. But I dont want the welcome screen to pop up

  • How can I get two windows to communicate?

    I am trying to get two windows to communicate.
    Window a opens window b.
    In window b, the user makes selections which are saved to a series of variables (3 strings and an int).
    When window b disposes, I want these variables to be passed back to window a so that I can load them
    into text fields.
    If anyone has any advise it would be greatly appreciated.
    Joseph

    If A opens B then just pass a reference to B or do a getParent, then use a setter in A to set the values you want.

  • When I close firefox, there are two annoying window underneath that I always have to close and they are always there again next time; how do I get rid of them for good?

    When I close Firefox, there are two underlying windows that I have to close every time. How do I get rid of them for good and prevent this from continuing to happen. Both windows were opened by me during viewing at some point, so they did originate from me.
    Thanks for any help you can give me!

    The Safe Mac
    The Safe Mac » Adware Removal Guide Genieo
    Thomas Reed's Mac Malware Guide
    AdwareMedic
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
    Mac Virus Malware Info
    MacBook Pro

  • I've lost two application windows -- how do I get them back?

    I can't access two application windows -- Mail and Spotlight. I sometimes use a external monitor so this may be related to that.
    When I switch to Mail, the Mail menu appears on top, but I do not see the window with my mailboxes in it. When I use Expose to see all the open windows, there's my Mail window, in light purple. I click on it, to select it, and the window zoooms away to the left, never to be seen again. The top menu indicates that I'm in Mail.
    The same thing happens to me with Spotlight. I can search in Spotlight, but the results are in an inaccessible window that zooms away when I try to select it in Expose.
    Plugging in an external monitor again does not retrieve the window, regardless of whether I mirror the displays or not. After searching these forums, I tried changing the screen resolution to 640x480 instead of 1024x768 but that didn't help. I looked in Library/Preferences to see if I could trash some preferences, but neither application seems to have any, that I know how to identify.
    Any help would be greatly appreciated.

    Just in case this comes up for anyone else... I got the windows BACK by hooking my computer up to the external monitor, and REVERSING the arrangement of the monitors (so the one that was on the left was on the right, and vice versa). This placed the window in my field of view and I was able to retrieve it.

  • Why am I suddenly getting a "Dropped Frames" error?

    Hi,
    For two years I was working on a large project in FCP 6 where I was able to do quite a bit of work without ever getting "dropped frames." Recently I deleted this entire project and loaded footage for a MUCH smaller project. This current project is MUCH less demanding. Fewer effects, fewer timelines to work with. Same exact system. Nothing has changed... except now... the mos rudimentary effects will give me dropped-frames upon playback. I know I can toggle a playback settings but how in the world is this suddenly necessary with a project that is 5% as demanding as my previous project??
    In particular, the dropped-frames occur when I'm...
    * generating basic text and adding a fade to the text
    * cropping part of one shot
    The specs are the following:
    + MacPro 2.8gb 8-core, 16gb RAM, Mac OS X 10.5.4, four internal hard drives at 500gb each
    + My OS and the FCP program are on Drive 1
    + My audio is on Drive 2
    + My visuals are on Drive 3
    + My FCP file and the render files are on Drive 4
    + The project itself is using footage from a Sony EX1 camera. I'm using audio from AIFF files. The progrmam is 2 minutes in duration. I'm using very little effects at all. 1 track of video. Four tracks of audio.
    What's going? Why am I now, with this new/smaller project, suddenly getting dropped frames? Was the deletion process the culprit? What can I do?
    Thanks,
    Shanked

    Download and run the demo version of iDefrag : http://www.coriolis-systems.com/iDefrag.php
    Click the drive in question wait for it to build the map then switch to the tab labelled "Files" at the bottom of the window. Sort by #Fragments and the highest will be likely culprits. If you do buy this software change the algorithm to "Optimize" for best results for video. Run it using default settings for the rest of it.
    For anyone else reading this I DO NOT recommend using defrag tools on the system drive or a RAID drive. This WILL make things worse for you. Only for use on single drive scenarios. The best way to defrag a RAID array is to move the files off to another drive, wipe the RAID clean then transfer the files back again (You can do this for any file system to improve performance). This will sort the files out again. OSX manages the rest until there is only 10% of your drive left (depending on how much deleting and writing of files happens in between - it's that which cause fragmentation).
    In terms of the 'size' issue (which you have no real issue with) I guessed that you meant the duration and complexity of your sequences. It's true that sometimes if you have a lot of sequences open these will use up valuable RAM (as FCP is only 32bit it can only utilize 3GB of RAM at most) and so when it is trying to buffer, cache and output the video it can trip over itself.  But your current problem is definitely down to dataflow off the drive and into FCP in time to decode and display the next frame. If it can't do it in time (within 0.03-0.04 seconds) then if detects an error and because you are in SafeRT mode it stops playback and displays the Dropped Frame error window.
    Pi

  • HELP! I will get back my Windows 8!

    Dear HP Support here my problem:
    Two weeks ago i have upgraded Windows 8 to Windows 8.1 from the Microsoft Store, but i will get many lags and i can't play games...
    I tried to restore HP minimal image but i can't access Recovery Menu, when i turn on my PC i press F11 and display shows "Please wait" and BLACK SCREEN !
    I haven't created Windows 8 Recovery Discs... i'm disperate please help me i can't play loved games !!!
    P.S: My Notebook Model is Pavilion g6-2324sl.
    Thanks you again, bye!

    Hi,
    Get back to Windows 8 is a lenghthy task. I don't know why Microsoft's done this. You are not alone:
       http://howto.cnet.com/8301-11310_39-57610729-285/how-to-uninstall-windows-8.1/
    The following option may be a little bit late for you:
       http://www.usatoday.com/story/tech/2013/11/10/windows-8-laptop-recovery/3476743/
    Hope the following link helps:
      http://www.makeuseof.com/tag/how-do-upgrade-to-windows-8-1-how-to-downgrade-back-to-windows-8/
    Regards.
    ps Just FYI, one of my machines crashed during Windows 8.1 upgrade and I had to rebuild it from Windows 7 (I upgraded it to Windows 8 and the Windows 8 upgrade DVD won't install w/o Windows 7). I won't touch to other two unless in few months times MS releases few "holes".
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Two main windows in smartform or two loops in one main window?

    Hello All,
    I have requirement in smartform where i want to print two diffrent data header and item data in the same page.
    and in between these two data i want one template to be printed for item data .
    Smartform is giving me error if i use two main windows
    if i use two loop nodes in the main window thn how to restrict the data getting over flowed to template(item data)
    scenario is
    header data****
    **item header**
    item data****
    Pls comment....
    Regards,
    Sunny

    As main window can only be one, so try it this way:
    Under main window create a TEXT1 for header text( first header) than a LOOP1 for looping the header table, under that first create a TEXT2 for header data, than below it create another TEXT3 for header text ( Second header), than below it add a LOOP2 for looping item table and in that add a where condition than under it a TEXT4 for item data .
    MAIN_WINDOW
        TEXT1                                     " first header
        LOOP1                                    " header table
            TEXT2                                 " header data
            TEXT3                                  " Second header
            LOOP2                                " item table with where condition
                TEXT4                             " item data
    With luck,
    Pritam.

  • I cant get two monitors to work on one pc.

    Does anyone know why i cant get two monitors working on one pc?
    I have a HP P6 2000 UKM computer, running windows 7 and it has a DVI D socket as well as the standard VGA (which i am using for my primary monitor)  I have got the right DVI  to VGA adaptor and have followed various instructions to set up duel disply but every tutorial i have seen says use the multiple display option,  but the option dropdown box is not there!
    Iv'e tried two different monitors but he same problem. If my graphics card does not suport 2 monitors then why is there a DVI D socket?
    Have never had this problem in the past!
    Please help.
    Nobby

    Hi,
    Please post the exact HP product number for your PC.
    VGA is analog and DVI-D is digital.  If you have two monitors then one of them needs to support a digital video signal if you want to use two monitors
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • I keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get it when I either try to open it from the Start menu or from the desktop icon.

    I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!

    Are you installing from the official site? http://www.mozilla.com/firefox
    If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
    If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
    SUPERAntiSpyware : http://www.superantispyware.com/

  • Help MacBook Pro 13" early 2011 suddenly black screen in Windows 7 SP1. EFI 2.2.

    Hi, everyone, I need help here.
    Apple MacBook Pro 13" early 2011 preinstall Lion version, EFI 2.2, Boot Camp 4.0. suddenly black screen in Windows 7 SP1 (black screen and also no sound at all, need to press power button to off). What happen?? Please someone tell me what to do?
    I have delete bootcamp HD and reinstall windows 7 but the problem is still here, I have reset PRAM and SMC too.
    The video on the black screen: (http://www.youtube.com/watch?v=z3dLTFSD-v8)

    Oh I actually have the problem in Mac OS, not even using the Bootcamp or Windows 7
    Csound1 wrote:
    lokiman wrote:
    I am having the exact same problem with my 13" early 2011 Macbook Pro. I have 10.6.8. I used the disk that came with the laptop to restore the OS to 10.6.7 but the problem existed there too. I have now updated it back to 10.6.8. The problem still exists. This doesn't seem to be limited to an OS version and seems like an issue with device driver or with hardware. I will try to take it to the Apple store and see if this gets resolved.
    You too have a black screen in Windows 7. ?

Maybe you are looking for

  • I want product costing related documents

    Hi I want product costing related documents, material..when i can download full producting, internal orders, profit centers, cost centers related... Thank you

  • Business graphics Customizing chart not found; contact administrator in MSS

    Hi All, We are getting error Business graphics Customizing chart not found; contact administrator in MSS-->Home Service only for one user but for remaining users it is working fine. Please find the below screenshot. Please provide your inputs...... R

  • Updating Issue

    Hi guys, I've kinda the same problem here, but I've got a 2.66ghz 4gb ram Macbook Pro, with Leopard OS (10.5.8) My  problem is that I live in Argentina, and untill yesterday I didn't feel the need of upgrading my OS (upgrading is waaaay more expensiv

  • Cannot download from websites.

    Starting today, I have been unable to download any files from websites. This problem has never happened before, when I click on the link to save the file, it accepts the selection, goes back to the previous screen, but no files are downloaded. This i

  • Cisco 3400 Input Packet 0

    Dears, We re using Cisco 3400 in out network with Metro Ip Access 12.2(53)Version. The issue is that we Plug SFP SFP-GE-L 10-2144-01,1000 BASE LX/LH and loop the Fiber Patch Cord we do not recieve any packet. Even if we connect to other Cisco we are