I'm sure there's a simple answer...Copy/Paste InD to PS pixel shift...

Howdy, I'm copying from indesign and pasting intophotoshop, and the 'pixels' keep shifting--I'm using points as the measurement in inDesign and would think they would translate to the PS pixels but not so much. Is there a setting to turn of anti-alaising or something  on paaste? Are the units of measurment just a hair of enough different that it causes issues?
Thanks in advance,
-Ted

Thanks Bob, was doing that, seems that it's juts an error ID-ten-T, if you know what I mean (user )
just sorted it out...
Seems my default in PS for placing the object from the clipboard is set to W: 101.7% H: 110.0% instead of 100%/100%.
Putting it back to 100% fixed it.
*sigh* there goes an hour 
Thanks anyhow.

Similar Messages

  • I am sure there's a simple answer to this newbie question

    Hi group,
    I am trying to burn my movie for my DVD Player.
    I am using PAL format.
    I edit the movie in Pinnacle Studio.
    I imported it into Encore.
    I try to burn a project 1.8 Gigas in Size and no problem
    I try to burn a project 2.0 or greater and it won't work!!!
    I am using DVD R/W
    I am sure there's no problem with the DVD Burner because I am able to
    burn a DVD movie using Nero onto a DVD R disc and no problem.
    My Burning speed is 1X.
    I have a machine built for editing: 2 giga of memory/ A8N-SLI premium
    Mother board / AMD 4200+ processor / 700 gigas of hard disk, etc
    How do I solve this problem?
    Thanks in advance for any help.

    I am using MPG 2 as a source for my movie.
    It won't work means that I appear to burn it successfully but when I go to the DVD player, it movie skip, drags after about half way through.
    If I burn the smaller sized file It will play well throughout but I need
    a 3.5+ capacity.
    Thank you.

  • I am sure there is a simple answer... but why can't I find where my extension is after install?

    Hello,
    I downloaded KT-ly 's 151 shapes and borders, tried to instal them, but when I open my PS I can't find anywhere. I can find my other downloads under brushes and actions, but not this one... where should i be looking??
    Also, on another border download, which installed the borders under the brushes (??) I can only change the color of the inside of the image, but the outline stays in black??
    I am new to this!!
    THanks!

    slfranchuk11 wrote:
    I am new to PS, and have spent the day learning.
    I am not new to Photoshop, have spent the last six years learning, use the application for at least about fifty hours per week, and I feel that I've barely scratched the surface.
    slfranchuk11 wrote:
    I can't find any 'shapes', how would I get to that menu?
    Not a "menu".
    Go to the Tools panel, select custom shape,
    then:

  • How to i get past the settings screen when trying to view my photostream? I just get stuck on the iCloudPhotos Settings page and can to any further.  Really annoying and i guess there is a simple answer to it? Can anyone tell me?

    I can't view my photos on my TV using AppleTV. This is because when I get to the iCloud Photo Settings page and turn on My Photo Stream,there seems nowhere else to go to look at my photos.  I guess there is a simple answer! Can anyone help.....please

    artschic:
    Welcome to Apple Discussions.
    Congratulations on your new MacBook Pro. You'll love it.
    In terms of your PowerBook G4, apparently your Hard Disk Drive has failed completely and I am not sure what else it wrong.
    First, try this:
    • Shut down the computer.
    • Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
    • Turn on the computer.
    • Press and hold the Command + Option + P + R keys immediately after the startup chime.
    • Hold keys down until you hear the startup chime for the third time.
    • Release the keys and immediately hold down Shift key to start up in Safe Mode.
    • Log in and empty Trash.
    • Restart normally and log in.
    If that does not work try Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    If still no dice, try the procedure outlined in the article Resolve startup issues and perform disk maintenance with Disk Utility and fsck.
    cornelius

  • I'm sure there is an easy answer out there somewhere - How do I import an address book from Windows Live to my Mac?

    I'm sure there is an easy answer out there somewhere - Can anybody tell me how do I import an address book from Windows Live to my Mac?
    Thanks

    http://www.freeemailtutorials.com/windowsLiveMail/addressBooksAndContacts/export Contacts.htm
    Explains how to make a vCard from Windows Live.  Apple's Addressbook supports this format.

  • Is there a problem with copy paste using Ctrl+insert and Shift+insert

    This is a swing application.
    initially i was using java 1.3 and the copy paste using Ctrl+insert and Shift+insert was working
    then i migrated the same to java 1.5 and this functionality got messed up.

    Include the following in your initialization code, before you create any components:     InputMap im = (InputMap)UIDefaults.get("TextField.focusInputMap");
        im.put(KeyStroke.getKeyStroke("control INSERT"), DefaultEditorKit.copyAction);
        im.put(KeyStroke.getKeyStroke("shift INSERT"), DefaultEditorKit.pasteAction);
        im.put(KeyStroke.getKeyStroke("shift DELETE"), DefaultEditorKit.cutAction); You'll need to add the appropriate imports, too: import javax.swing.InputMap;
    import javax.swing.KeyStroke;
    import javax.swing.UIDefaults;
    import javax.swing.text.DefaultEditorKit; It seems they accidentally removed those bindings from JTextField under MetalLookAndFeel in JDK 1.5. They've been restored in JDK 1.6.

  • I'm sure there is a simple fix...but I'm stuck!

    I'm sure there has to be a simple fix to this, but I can't
    for the life of me figure out what it is.
    I am trying to use an Accordian Widget to make a navigation
    bar. So far, all is going well EXCEPT ...
    For my last three tabs, I want to have tab labels (which will
    eventually have links), but they will not have any content below
    them.
    I have the "guts" working okay. I will be adding links to the
    tab labels and the line items under the content.
    But first I need to figure out how to make it so that the
    last 3 menu bar (e.g., Frequently Asked Questions; Contact Us; and
    About Us) have the tabs, but when you click on them you don't get
    the space underneath where the Content should be.
    You can see the example I'm working with at:
    http://www467.pair.com/redjeep/foo.php
    If you need to see the CSS file, let me know and I can send
    it.
    Thanks in advance for any suggestions!
    PS I'm a newbie. But I've spend a lot of time searching
    through forums and though I've found answers to a lot of my
    questions, I have yet to figure this one out!
    Kimberly

    Hi Kimberly,
    Since your link tabs are at the bottom of your navigation
    bar, a possible solution for you is to place your links *OUTSIDE*
    the accordion markup, and just style them to look like the
    Accordion tabs. That is, they don't have to be part of the
    accordion, just look as if they are.
    --== Kin ==--

  • Help, is there a way to retrieve copy paste errors / files? Please?

    Hi Everyone,
    I am in a desperate situation.
    I am working on a project that I did in Pages, don't know what version I am in but I have a 10.6.8 OSX. I have a Macbook Pro.
    My problem is I didn't turn on the Time Machine (which I NOW know I should have done).
    I have been copy pasting some text into a master file to make use of the Table of Contents feature.
    In the midst and rush of things, I ended up with an error.
    I erased part the original file, I was copying from. I discovered it a day or two after.
    The thng is I had emptied my trash bin to save space almost the same time too.
    Is there anyway I could retrieve the original version of the that file. Might it be hidden somewhere in my hard drive?
    How do I retrieve it?
    That was probably 4-5 pages long and now its 1 page only.
    Please please help,would appreciate any tips.
    Thank you so much for any advice.

    No I'm sorry, but it is gone. The older file is overwritten by the newer when you save.
    No comfort now, but if you had upgraded to OSX 10.7 (Lion) there would have been an older version retained within the file and you could have regressed back to that.
    Peter

  • Can't open files exported for Soundtrack - I'm sure there's a simple fix.

    I have a clip from a movie that I'm trying to score. Exported it for soundtrack as aif, wav and mp3 files. When I go to open them in ST, they're greyed out.
    I just need one version to open.
    Any help would be appreciated.
    -Waddy
    Using ST 1.2 and FCP 4.0 on a G4 Powermac

    I am not sure what you mean but try and get the sound track to iTunes then drag the file to the desk top and import from there. Is there sound on the clip now? Are you sure they are Aiff files? Maybe check when the soundclip is in iTunes.

  • My Iphone 4 has slightly zoomed in and I can't see the whole screen. I am sure there is a simple solution.

    My Iphone 4 has slightly zoomed in on the screen and I can't see icons on bottom or read whole screen. Can somebody advise, I am sure a simple solution?

    This is covered in the manual:
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • I know there's a simple answer

    Hi ...
    New to this software, Life Cycle 7.1. I was able to design the form rather easily. Previewed the form. Sent it as an email attachment (the file came through as a .pdf) to someone who was able to fill in the form very easily.
    When they clicked the "submit" button, the file attached to the email as a .xml format. The file comes through as an .xml format. When I receive the email and try to open the file, it goes to a web page with each field listed.
    I want it to open in the pdf format in which it was created. How is this accomplished? If this is not possible, how can I use the web page information?
    Thanks
    Sandee L. Hill

    Change the "email submit" Button to a regular button.
    Under the submit tab, change "submit as" to PDF. change the button text to "Submit" DONE!

  • HT1386 hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Than

    hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Thanks.

    Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
    http://support.apple.com/kb/TS3694
    Solution below.
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • Looking for a simple answer ........ without the ...

    looking for a simple answer  ........why is it more difficult for skype to connect than before . It fails to ring most times and your never sure if it is just slow or did not dial in the first place???  and is there any way to disable the leave a message feature ??? I am afraid soon it will be like most wondows applications where you will need endless updates and patches just to keep it running ..... Why is it that everyone is trying to fix everthing when it isnt broken.

    WTF? I'm sure you can find plenty of examples on google. It's on you to take the time to go through them, study them, and, if you still don't understand something, post a clear, concrete question that indicates what you read and what you didn't understand about it.
    As is, you're essentially treating folks here as your research flunkies and saying, "Give me an example that's better than all the ones already easily available to me. Read my mind to know why I didn't like them."

  • Need a simple answer for simple question???

    simple question... what is the best way to export my fce movie and burn it on idvd for the best quality for genaral use ... sd..4x3 ratio tv.. lots of ken burn effects on photos... lots of sd video... ???
    not so simple answer... i have read manuals.. apple discussions.. etc etc my eyes are blurry.. i have been exporting out of fce to qk time movie, then import to idvd and burn..
    i get lots of wavy or jitter when doing kens burn effects on photos.. i have been told that 1 field must be missing.. and its better to take the qk time movie convert it again making sure hi quality is checked(movie properties 720 x 480) and self contained movie, then import to imovie ver 5.02 which has better codecs then to idvd ... an apple store tech said..
    then another apple store tech said...dv pro or dv stream or interlaced or on and on and on
    its not 16x9, or for the web or anything but simply burn it and give it to my grandma to play in a standard dvd player.. best quality.. period.. i know it won't any better than my source video but the wavy photos bother me..
    help

    The Apple store tech told you garbage. The quality will be the same. It's using the same QuickTime engine. There may be a difference because going through iMovie will go through a file conversion and the picture might be softened a little, which will mitigated this flicker you see.
    The wavy photos can be a lot of things, most likely due to the nature of the images themselves and the movements you've done on them. What often works on still images is to apply a one pixel vertical motion blur in an application like Photoshop or Elements. This helps to reduce interlace flicker on motion when the material is brought into a video editing application.

  • I cannot connect to the internet after switching providers.  I've changed the email address associated with the new account but am sure there is something else I need to change.  Can anyone help me?

    I cannot connect to the internet after switching providers.  I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password.  Can anyone help me?  (This is an ipad question).

    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    iOS: Changing the signed-in iTunes Store Apple ID Account
    http://support.apple.com/kb/ht1311
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for