I'm trying to add the lowest 4 out of 6 numbers in a column

New to numbers and I'm trying to create a spreadsheet that adds the lowest 4 out of 6 numbers in a column. I've made the spreadsheet with it adding all six numbers but haven't quite figured out the rest. Any help or direction to a solution would be appreciated.

Heres's a solution that you might find interesting, not necessarily better:
The first 5 rows are Header Rows...
In one sense it's a more general solution since it doesn't matter how many numbers are in the input list. On the other hand, you run out of Header Rows at 5 , so if you want the sum of the first 5 or more numbers, you need a different layout.
Jerry

Similar Messages

HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
Thanks,
Ivette

You would need to get the IP address of your printer then manually add a network print queue.
To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

Trying to add the new year 2012 to posting periods

I am trying to add the new 2012 months in posting periods in order to allow us to post some invoices that have terms due in 2012. First, when I go to add a new period the "category" feild is missing. Im guessing this has to be added somewhere else but I am not sure. Second, When I go to add the actual month for January 2012, I get the error "Enter Valid code [Posting Period -Period Code], '-' [Message 173-36]. Not really sure why I cant add this but I am guessing there is a step before I am missing. Any suggestions please...thank you!

I figured out how to add it, I was adding the month as 2012-01, yet I only had to put 2012 and it would pre-fill in the dates then. Thanks anyways!

RE: An error occurred while trying to add the selected printer. Error -9672

I am trying to add my HP 8450xi to my Printer List via Print Utility and get the following message: "An error occurred while trying to add the selected printer. Error -9672." I have tried everything, and this printer is only 2 years old. I was able to load an HP 69080 which is about 2 months old, and my Lanier LD232C drivers. Any ideas?

My HP 8450Xi is connected to my LAN [ethernet]. While I do have an Airport Card in my Mac Pro, and two airport base stations active for laptops, it is disabled. What is strange, I was able to load the drivers for a newer HP Network Deskjet 6980xi (Driver version 4.0.2), although it took a couple of times before it would successfully load, but could not figure out why it worked and the 8450xi (Driver 2.5.5) did not. Also, the 4.0.2 driver would not work with the 8450.

I'm trying to add the email address for my verizon phone to iMessaging. In order to verify, you have to reply to an imbedded link in the message. Unfortunately the link is truncated. Any idea how to get around this?

I'm trying to add the email address for my verizon phone to iMessaging. In order to verify, you have to reply to an imbedded link in the message. Unfortunately the link is truncated. Any idea how to get around this?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

I am trying to add the Youtube widget, but I get a black box saying blocked plugin. I have even tried to embed it from Youtube as well and it does the same thing. But when I drag the Vimeo widget over, it connects like it should. What am I doing wrong and

I am trying to add the Youtube widget, but I get a black box saying blocked plugin. I have even tried to embed it from Youtube as well and it does the same thing. But when I drag the Vimeo widget over, it connects like it should. What am I doing wrong and how can I fix this problem?

Make sure that both the web browser you're using and its Flash plug-in are up to date. Google Chrome has its own Flash plug-in it updates on its own. Firefox, IE and other have separate plug-ins.

AirPort Extreme wireless was working fine until I tried to add the extreme to extend network range...now neither is working and I can't fix.

Help please? I got the Express yesterday and had it set up and working fine. However I found the signal and connection wasn't going far enough/fast enough for all areas of my home I wanted it to. Today I got the Extreme. I unplugged the Express, plugged in the Extreme and set up the new wireless network for that one just fine and it was working great. However, I still wasn't getting quite the connection/speed I wanted through out my house, so I tried to add the Express to extend the network I set up from the Extreme and now neither one is working. I tried resetting and starting over from the beginning but I can't even get just the Extreme to work by itself and am not sure what to do.

The following are the basic steps to configure an extended network with two 802.11n AirPort. Please take a look to check if anything was missed when you configured yours.
Dynamic WDS - Extending a Wireless Network Setup
If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
Open AirPort Utility, and then, select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then, click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password if necessary.
Click Update to update the base station with new network settings.
(ref: Pages 43-44 of Apple AirPort Networks.)
(ref: Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations)

How to make add the program system.out messages to a applet text field?

How to make add the program system.out messages to a applet text field?
System.out.println("I wanna displany this message on a applet text field, thanks");

You may wish to change the output destination to a JTextArea. Please have a look at this link that likely shows what you want:
[http://forums.sun.com/thread.jspa?forumID=54&threadID=640376|http://forums.sun.com/thread.jspa?forumID=54&threadID=640376]
If you need other examples, search the forum. I found the search terms -- redirect system out textarea -- very helpful.
Good luck

Error 9672 - An error Occurred when trying to add the selected printer

Hi. I got some issue with Leopard and printing. I couldn't print so I reloaded the HP Photosmart Installation disk (which in reality is for Tiger)......I got the message above. I cannot add the printer. I can print thru ordinary PCs, but not from the imac. I would have though that with the Leopard upgrades these drivers would have been updated automatically, but apparently not the case?

My HP 8450Xi is connected to my LAN [ethernet]. While I do have an Airport Card in my Mac Pro, and two airport base stations active for laptops, it is disabled. What is strange, I was able to load the drivers for a newer HP Network Deskjet 6980xi (Driver version 4.0.2), although it took a couple of times before it would successfully load, but could not figure out why it worked and the 8450xi (Driver 2.5.5) did not. Also, the 4.0.2 driver would not work with the 8450.

I'm trying to add the "Simple Timer" add-on and I can't get it to add on

I can't seem to download the Simple Timer application to my desktop. I'm NOT a PC kinda guy so I need help.

Hi Tatt22-
In response to your question I went to install the Simple Timer extension and was also not able to install it successfully. I've filed a bug with the Add-ons team so that this will be addressed: [https://bugzilla.mozilla.org/show_bug.cgi?id=699910]

My windows PCM has iTunes 11.0.4.4. I created a new playlist in iTunes and wanted to add it to my iPod nano. When I tried to add the new playlist iTunes wanted to wipeout all of my other playlists before it would allow me to sync! Help!

I don't want to lose my playlist already on the iPod so I won't click the sync box because it will delete all my lists. How can I add a new playlist without losing the others? Can it be done?

You want to transfer purchases from the iPod to your iTunes account.
Connect the device to iTunes but do not sync.
Select File > Transfer Purchases.
This will copy the content purchased via iTunes on the iPod to your iTunes account.

I'm trying to add the system date with a Label. What is wrong with the code

import java.util.*;
import javax.swing.*;
public class CurrentDateApplet extends JApplet
     Calendar currentCalendar = Calendar.getInstance();
     JLabel dateLabel = new JLabel();
     JPanel mainPanel = new JPanel();
     int dayInteger = currentCalendar.get(Calendar.DATE);
     int monthInteger = currentCalendar.get(Calendar.MONTH)+1;
     int yearInteger = currentCalendar.get(Calendar.YEAR);
     public void init()
          mainPanel.add(dateLabel);
          setContentPane(mainPanel);
          dateLabel.append(currentCalendar.get(Calendar.HOUR) + currentCalendar.get
                    (Calendar.MINUTE);
}

As for what's wrong with the code, it would be easier if you said: it doesn't show the date (it does this instead), it doesn't compile (I get this message) etc.
Anyway I'll assume you want to display the time in a label...
dateLabel.append(currentCalendar.get(Calendar.HOUR) + currentCalendar.get
(Calendar.MINUTE);This won't compile: the parentheses are mismatched, and there is simply no such thing as append(). So we could trydateLabel.setText("" + currentCalendar.get(Calendar.HOUR) + currentCalendar.get(Calendar.MINUTE));This wroks, but looks pretty nasty and it's not how you are supposed to format dates and times. Here's the unofficial party line, nicked from one of jverd's posts:
Calculating Java dates: Take the time to learn how to create and use dates
Formatting a Date Using a Custom Format
Parsing a Date Using a Custom Format
From those links you should be able to find those applicable to times like this: http://www.exampledepot.com/egs/java.text/FormatTime.html
Using this approach you would end up with something like:import java.text.Format;
import java.text.SimpleDateFormat;
import java.util.Date;
import javax.swing.JApplet;
import javax.swing.JLabel;
import javax.swing.JPanel;
public class CurrentDateApplet extends JApplet
    private Date date;
    private JLabel timeLabel;
    private JPanel mainPanel;
    public void init()
        mainPanel = new JPanel();
        timeLabel = new JLabel();
        mainPanel.add(timeLabel);
        setContentPane(mainPanel);
        date = new Date();
        Format formatter = new SimpleDateFormat("HH:ss a");
        timeLabel.setText(formatter.format(date));
}

Canon iP4200 - an error occured while trying to add the printer Error -9672

It seems I am one of the hoard of folks unable to add my printer (in my case, a canon iP4200) to the Airport Extreme network.
I have repaired permissions
I have reinstalled the lastest driver
I have read through the discussions
The airport was sold in part because "You'll be able to print to your USB printer with it."
Is there an Airport expert out there who can fix this?

What firmware does your base station have?
What version of the Canon driver are you using?
iFelix

I have a cd that itunes can't find info for. I tried to add the info but the get info button is grey. can anyone help? thank you!

I have a Macbook Pro with OS 10.6.8

Hi Maeyer,
Welcome to the Support Communities!
Have you had issues importing and editing information from other CDs, or just this one?
I would check your preference settings in iTunes and try to import the entire CD again. You can also try just adding one track by dragging it to a playlist to see if you get a different result. These articles may help ...
iTunes: About the Add to Library, Import, and Convert functions
http://support.apple.com/kb/ht1347
Playing and managing content in iTunes
http://support.apple.com/kb/HT1399#3
Editing and arranging content
Each audio or video file in iTunes has several settings and tags that can be easily modified. These options can be accessed by selecting any file in the iTunes browser windows and selecting "Get Info" from the File menu. You can add song lyrics, artwork and set special playback options. The "Info" tab lets you edit information about the file including artist and album info.
Cheers,
- Judy

I have latest lightroom 5 and was trying to install athentechs perfectly clear 2.0 plug in and when i tryed to add the zip file lightroom screamed at me error to fix this do i need to reinstall lightroom

do i need to reinstall lightroom 5

JimHess wrote:
Has anyone used this plug-in? It seems to me that it's pretty expensive for what it does. What am I missing?
It's cack - but then, I've never been a fan of images that look like the subject matter has just been hit by a nuclear detonation, and I've never aspired to "one click and done".
It used to come with Bibble/Aftershot Pro, and in all the years I used those converters, I didn't find a use for Perfectly Clear once. Admittedly they've expanded its function considerably since, but it's still a gimmicky "everything boosted to eleven" gadget.
Put it this way: Ken Rockwell's a fan!
All that said, it's probably better than Lr's "auto" functions. I suppose if you believe that a piece of software can guess what's best for an image better than what you can arrive at by using your own eyes, it might have merit, but "gimmick" sums it up for me.

I'm trying to add the lowest 4 out of 6 numbers in a column

Similar Messages

Maybe you are looking for