I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

Similar Messages

I am trying to update my iphone 4 icloud but I keep getting can not connect to server when I click on the terms and conditions

I am trying to update my iphone 4 icloud but I keep getting can not connect to server when I click on the terms and conditions

" iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connention is active and try again."

Hello..Does anyone in this community know what the following error code indicates   0x8002006E   I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.

I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.    Thanks for any help you can offer,

Thanks for your reply:
I did find an error log related to the error code and tried all suggestions on the list of recommendations, still no luck
I definitely am running OS X10.5.8 (hopefully will be updating later on this month)
I tried several brand new discs from the same box, still no luck.
My last option is to go out and try a different brand, guess I'll go with Verbatim this time but I think I'll poke around some more before buying 20 more new discs.

Why can't I burn a dvd from idvd? Could it be due to Mountain Lion?

I have upgraded to Mountain Lion. I am now unable to burn a dvd from idvd. Could ml be the problem? I have purchased new media-verbatim DVD-R. I can burn Cds. Help!!!

I solved my issue. I tried three different brands of DVDs and imation finally worked. I had used the others before and they worked perfectly. So what is the deal, but anyway I found one that worked!!!

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

Will idvd with a new MacBook Pro work with a DVCAM deck? I'm using firewire to burn a DVD from a DVCAM tape in a Sony DSR-30 deck but it isn't working.

Will iDVD with a new MacBook Pro work with a DVCAM deck? I'm using firewire to burn a DVD from a DVCAM tape in a Sony DSR-30 deck but it isn't working.

http://www.lafcpug.org/phorum/read.php?1,268296,268300
Bit of googling wouldn't go astray.

Trying to burn a dvd from fce

i tried the idvd forum but havent got any responses- since this forum has always been such a help i figured i'd try it- does anyone know how to free up disk space for encoding assets on idvd- apparently its a 'multiplexer' problem- or can someone fill me in on how to use the disk utility to burn a dvd after i have already exported my project from final cut express as a quicktime movie - i have also tried to print to video and it prints sound but the picture doesnt come up in the playback- says the data is incompatable- help!- i cant sleep till i figure this out-
thanks
josh

Hi suprjosh
A multiplexer error is usually occurs when burning to a poor quality DVD disk. It can also happen if you are trying to burn the DVD at a too high of a speed. Verbatim is very good. Try burning a disk image from iDVD first. From there use disk utility to burn a DVD. Disk utility will allow you to select a burn speed. Try 4X at most. If you are burning directly from iDVD buy a disk rated to 4X not 8X, 16X etc. It's just too fast and you'll get multiplexer errors.
Good luck
Carl

When Burning a DVD from IDVD it does not encode Video

I am having trouble burning a DVD that will not freeze. All of them come out and are read by DVD players of all kinds, but it gets about 3 minutes into the video, and it freezes. I saved as Image to Disk, and it went through the Burning process flawlessly and played through in its entire contents, but then when I tried to burn it to a DVD, it made the menus fine, but when it came to encoding the video, it skipped that part and went straight to encoding audio and it did not work. It came out with just a little video on there, but it did not use the same process as the Save Disc to Image did. When I saved Disc to Image it played through the whole project in kind of a slow motion. The Burning to a DVD did not do that at all.
Please HELP!

I do not have 20gb free on my start up drive. I will once I delete the bulk of the project. How can I save the project to make sure that when I delete the big project, the parts that I have edited and want to not get deleted?
As for my Imovie, It is a 22 minute long home video that does include 5 chapter markers, including the one that starts the movie from the begining. There is music for every clip from my itunes. The theme i chose is the first one listed on the list. It starts in from the right side, and then scrolls across at the top. All of the menus work fine when i play my burned DVD. In fact, everything works fine except for that one part when it freezes up.
I do not understand what you mean by adding my movie to a drop zone and not to the background. The way i started it on Idvd was by clicking, create an Idvd from the menu on imovie.
I made a new step of progress and i got the encoding of the video, but it still did not work. It froze at 3:03 instead of 3:27, 3:38, or any of the others. This is the second disk i have made though that will play on my Powerbook. It freezes on everything else though.

My imovies no longer show up in media options when i am trying to make a DVD from iDVD.

it says "to se imovie projects here, use imovie 3 or later..." but i have not changed anything. even more odd, when i tell it to look at an external drive where i store old imovies it sees only a few of the many i have there. it's like the extensions of some movies got changed or something. help please and thanks.

Where do I find the idvd icon so I can burn a dvd?
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219

Help. trying to burn a dvd from fcpx. says bitrate too high

I'm using fcpx for a montage with effects like generators etc...not sure if this is why it says bitrate too high. I want to burn a dvd and it stops at 66% saying bitrate too high. I've seen an answer from 2011....wondering if anyone has anything new? My computer is Mac book pro 15 inch, latest software. I went to compressor but the final product doesn't allow me to put in a title and i'm worried about final quality. Thanks for any help

I would say usually it's about the same. If the settings are adjusted properly, it can sometimes improve the results; conversely, there's always the potential to get terrible results if the settings are wrong. (FCP X Share kind of takes that risk out of the process.)
Where the software can often add value is when you have long videos that you're trying to fit on a disk. Or trying to compress certain HD material with complex scenes. Or sometimes, you'll run into players that choke on a DVD and the adjustments in Compressor give you a chance to adjust the bit rate to a level that widens the disk's playability. And there are audio and video effects that can be added in Compressor without re-editing in FCP.
BTW, I don't believe you've yet told us how long your project is.
Russ

What does this message mean when I'm trying to burn a DVD from the Finder in Mavericks?

The disc can’t be burned because an unexpected error occurred (error code 0x8002006E).
Trying to burn a 1 gb video m4v file that my friend sent me via dropbox.
The video plays fine on my laptop.
All seems to be going well with the burn from my finder until I click burn. Then I get that message.
The disc can’t be burned because an unexpected error occurred (error code 0x8002006E).
HELP!
Steve

This seems to suggest that it could be filenames… (see the final posts).
https://discussions.apple.com/message/7818914?messageID=7818914#7818914?messageI D=7818914
Replace dashes, underscores, hyphens & any other funky looking characters. Very long filenames of folder paths may cause trouble too.

Trying to burn a DVD on iDVD 4

But when I click the "burn" icon, I get "ERRORS IN PROJECT-- There were errors during the project validation that to be fixed before burning the project." I went to open DVD map. I changed one thing that might have been a problems and it still gives me the same message when try to burn a DVD. Anyone have any ideas? Thanks
Jack

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK will work under Leopard)
• Program miss-match. iDVD’09 v. 7.0.4, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (does work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W

Error #-34506 when burning a DVD from iDVD 5.0.1

Hi everybody,
Everytime I try to burn a a finished iDVD project (a big QuickTime movie), I get a message : "There were errors while multiplexing and burning", error#-34506. In reality the project wasn´t burned, the DVD is empty. When I burn a short slideshow - no problems. I tried different manufacturers of DVD-Rs to no avail.
Any help will be greatly appreciated.
PowerMac 2GHz DP, 39 GB free harddisk space, MacOS 10.4.2, iLife 5, newest updates
Regards, Adam

I have the exact same problem. I am running a brand new iMac G5 2ghz with 10.4.2 and iDVD 5.01 and QT 7.03. I have tried it by importing my DV and MOV files into iDVD. Same failure with differnt media, even skipping one clip that I thought might be problematic.
Have further tried it with different compression settings in preferences... high quality vs. high performance. Same error.
Imported movies into iMovie and tried to run iDVD from there.... everything crashed. After a reboot, tried it again, and this time at least got a description of the error... something to the effect of "there was burning error but the disk has been untouched and can be reused, please try again..."
Am no trying to reimport clips into imovie, and export as one movie in both DV and MOV formats, to try it again..
Apple help couldnt even find the error number much less offer any other help..
IDEAS??

I keep getting error code 4450 when I'm trying to burn a CD from itunes. It keeps my CD and won't eject it and says "cancelling burn" forever then itunes locks up and my cd is ruined and NO songs on it.

i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!), Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
-I've slowed down the burn as slow as it can go
-I have bought 3 different brands of cd's
-i have the latest version of iTunes.
Can someone help me?

I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.

Unable to successfully burn a DVD from iDVD

I have created a slideshow in iMovies 9 with music etc and I am trying to burn it to DVD to show on my TV.
Using the BURN button it runs through the menu rendering etc and gets to the burn stage, runs for some time saying MULTIPLEXING AND BURNING then ejects the DVD, and says DONE though it still says: TIME REMAINING: ABOUT 1 MIN and the burn symbol continues to spin.
I am using a DVD-R disk.
If I try the DVD in my player it doesn't recognise it, nor in my Mac, and looking at the disk it doesn't appear to have been burned.
Any ideas what could be happening please?
Message was edited by: Andalucia Dreaming

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Similar Messages

Maybe you are looking for