I'm trying to burn a movie to a dvd...
I've added the movie to a playlist, and then I select "Burn playlist to disc" from the file tab. My problem is that when I do this, it continually asks me what I'd like to do with the disc (and won't actually burn the movie). I get this notification both from iTunes and my computer. The dvd holds 120 minutes, and the movie is only 80 minutes long, so that's not the problem.
iDVD is no longer supported by Apple and does not come pre-loaded on new Macs.
If your computer did not come with iDVD and iWeb preinstalled, you can ask Apple for a free copy here:
http://www.apple.com/feedback/idvd.html
Alternatively, you can purchase a boxed version of iLife '11 from Apple, Amazone, etc. Boxed versions come with iDVD and iWeb still on the disk.
Similar Messages
-
Been trying to burn a movie onto DVD and get this "The disc can’t be burned, because the device failed to calibrate the laser power level for this media" Anybody know what it means and what to do? Help! Thanks
It generally means that the media is faulty or of poor quality. Most of us here use Verbatim, Maxell or Taiyo Yuden media.
OR
Your Superdrive may need a clean.
If you have further questions please state what Mac, with what versions of OS X, iMovie and iDVD you are using. -
Hi there, I have been trying to burn a movie I created in iDVD. When in the "creating your DVD" it is VERY slow saying it will take over 6 hours to burn the movie. I have never had this problem before. It also won't let me minimize the screen, I just get the beeping noise that something is wrong, but no pop up window telling me what to do. Does that make sense? Also the black & orange burn wheel is spinning VERY slowly and will often just stop. Any help would be much appreciated. Thank you!
Hi
When iDVD goes slow to ridiculously slow - it usually depends on - low free space on Start-up hard disk
• I set for a minimum of 25Gb free space
• 10Gb might work but slow
• 5Gb - slow and un-stable - DVD usually doesn't play
• <1Gb - iDVD might not even start and even so Mac OS runs into problems.
Else
Not knowing the origin to Your problem - General approach when in trouble is as follows.
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named.
*com.apple.iDVD.plist*
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple’s Disk Utilities application)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK will work under Leopard)
• Program miss-match. iDVD’09 v. 7.0.4, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (does work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W -
I am trying to burn a .mov file from fcp xpress timeline to a dvd. The popup message I receive prior to inserting the dvd is that I need 20.05 gb of space available on dvd (a 1.25 min program). How can I get this program onto a dvd (where the max available gb's for off the shelf dvds-r) shows a max of 8.5gb?. Please help. Thank You!
You have posted your question in the Final Cut Pro X forum. You want to be in this forum instead; https://discussions.apple.com/community/professional_applications/final_cut_expr ess_hd
Good luck.
Russ -
How do I burn a .mov file to DVD?
I need to burn an MPEG-2 video file saved as .mov to a DVD that will play in a regular DVD player.
I have tried opening iDVD and the selecting 'Create a New Project'. When I have selected a location for the project and the main window opens, I go to File > OneStep DVD from Movie...
My understanding is that when I import a movie file, it will burn it straight to the disc without any further options. It does this, however after a couple of minutes the DVD is ejected blank and iDVD says the burn has completed.
How can I solve this problem or is there another way to burn a .mov file to DVD?
Thanks, DanA green screen in an indication that the movie is in a format not supported by iDVD. It should be in one of these formats: DV, high-definition video (HDV), MPEG-2 SD, MPEG-2 SD, MPEG-4 SD, MPEG-4 HD, and AVCHD. (From SDMacUser's post in What input file formats does iDVD...: Apple Support Communities). The post has other requirements that need to be met.
SD = standard definition.
Open your movie with QT Player and bring up the Info window for the movie. It will have the format:
Another possible reason is the Energy Saving settings on the Mac. Turn off energy saving and screen saver before starting the save as disk image or burn.
Other possible fixes can be found in this tipic: Green Screen with audio after Burning: Apple Support Communities -
I am trying to burn a dvd. I created it on Imovie shared it to Idvd and am trying to burn it on a memorex dvd-r from my mac os x laptop. Each time it attempts to bunr and then ejects it early. Usually near the end. Please help.
You will get better results if you use the Share ➙ Media Browser menu option and then drag the movie from the Movies pane of the Media Browser in iDVD onto the menu window.
Also I suggest you use this workflow which I learned from Bengt:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
I'm trying to burn a Iphoto slideshow to DVD but the "burn" in the menu isn't active?
I'm trying to burn a slideshow to a DVD but it isn't hightlighted in the menu? Any ideas. Also, is there a way to put captions under a photo that show up in the slide show?
Thanks,
Michael QuinnTo burn a Slideshow you DVD for viewing on a domestic DVD player you need to use an app that with author the disk to the correct format.
Macs used come with iDVD for this purpose - accessed by going Share -> iDVD, but if your Mac doesn’t have this then you need to get such an app, then export the slideshow from iPhoto. This will make a movie of it, then add it to your DVD project.
Regards
TD -
How can I improve quality of image when burning a movie to a DVD
How can I improve quality of image when burning a movie to a DVD?
What resolution are you using? If the DVD is to be playable on an ordinary DVD player, only ordinary TV resolution is supported. You need Blue ray for HD.
Geoff. -
Is it possible to burn 2 movies on 1 DVD?
I've got a problem with Compressor 4. How can I burn two movies on one DVD?
Regards, JanThanks for your help! Yes I've got FCP X....;) But I'm asking now myself: Do DVD Studio Pro and Toast work with FCP X? Of course, I can import normal files, but I think, that I'll loose a lot of quality, if I don't export files directly from FCP X right?
Regards from Switzerland, Jan -
Burning a movie onto a DVD+RW ??
How come when I burn a movie on my DVD+RW, it works when I play it through my mac laptop computer, but it doesn't work in my DVD player???
Do these require two different disks or something?one of my older set top dvd players also has issues with rw (and/+ plus) media. not uncommon. I think it's because some RW's have a lower reflective surface than standard dvd-r (and again this varies by brand /manufacturer). so yes, this can happen.
Message was edited by: SDMacuser -
Burning Purchased Movies onto a DVD
If I purchase and download a movie from the iTunes store, can I burn that movie to a DVD the same way that a burn or back-up my music to a CD? Also, if I put the movie onto a DVD, will it play in a DVD player?
Message was edited by: fortonr185Not exactly, to anyone reading the Terms of Service, it's not all that apparent really. Here's what the Terms say:
"(vi) You shall not be entitled to burn video Products or ring tone Products.
(vii) You shall be entitled to export, burn (if applicable) or copy (if applicable) Products solely for personal, noncommercial use. "
To me, this just tells me that I can't burn video products, but then contradicts itself saying that I CAN burn video products, but only for personal use (in other words, the standard rules of not reselling or distributing videos, as all videos state in the beginning)...
I did read the Terms before making those purchases, and they are not very clear. So with this in mind, I do blame Apple for not stating the terms more clearly... -
Trying to burn my video to a dvd and I get media not present ?
I am trying to burn my video to a DVD and I get media not present ??
mcavalla
Just going to add on
a. Is this a :"it worked before but not now" issue or "it never worked before" issue?
b. If you did a burn to folder (4.7 GB) for your DVD-VIDEO, does that go to a successful completion?
Looking forward to your follow up.
Thanks.
ATR -
I am trying to burn a slideshow onto a dvd that will play on a standard dvd and tv
You can't just copy the slideshow to a DVD as, you've found out, that won't play on a TV. You need to use a program that will render it into DVD format, complete with the proper lead in and trailers. I use Toast to do that, however, there are other programs that can do that too.
-
I want to burn my movies to a DVD but, it tells me to go to iDVD toolbar on my iMac. If it does not show up how do I find it?
You'll need to purchase iDVD 7 via the boxed iLife 11 disc from a 3rd party retailer like Amazon.com: iLife 11(US store) since iDVD has been discontinued by Apple and is not being distributed with new Macs or in the Apple store.
OT -
I am trying to burn videos to blu-ray DVD
Hi, I am trying to burn videos to blu-ray DVD, but unfortunately Encore is no longer available. How do I burn DVDs with the software currently available, which software do you recommend, and is there a link to show me how to use the software? Thanks a lot!
You need Encore CS6 which is bundled with Premiere Pro CS6.
There is no Encore CC so you must install Premiere Pro CS6 in order to get Encore CS6.
Encore CS6 not installed with Creative Cloud
Maybe you are looking for
-
Coding Confusion: Links linking to wrong...links
Hi everyone, I'm writing some code in Flash MX 2004 and everything works fine except for the last button (4DSystemsProducts). According to the coding if none of the drop down buttons work it should go to products.php, but for some reason it goes to 4
-
i recently went from a iphone 3 to a 4 and when i send messages they are going to other ppl as well as the ppl they are intended for this did happen once with the iphone 3 but now its all the time i have been in settings but it's not high lighted so
-
Multiple constraining classifiers in generic templates - compiler broken
can not compile multiple constraining classifiers to a generic template if the classifier is defined in the template: public <U, T extends U> void a() {} will compile. java language specification: 4.4 Type Variables says: public <T extends
-
Itunes Store is running SO SLOW?
i am not receiving an error message. But when I search or click on links, the connection is INCREDIBLY slow, like over 3 minutes of ACCESSING THE STORE to go to the album I selected. All other web pages work fine and I contacted my ISP and the my cab
-
KDEConnect file browsing not working between PCs
Hello, Recently I've noticed that browsing files in KDEConnect doesn't work between PCs. PC is showed in the list, ping is working, but when I try to browse the files either by button from KDEConnect menu either direcly from Dolphin, system is trying