I'm trying to burn a voice memo that i have saved in my itunes to a CD, but its saying there is an unknown error. Does anyone know a way to fix this?

I have saved a voice memo from my iphone onto my itunes and am trying to burn that onto a CD, but it keeps saying there is an unknown error. I have tried putting it in a few different formats, but nothing is working. Can anyone help?????

Hello kmason128
Check out the article below to troubleshooting burning issues with iTunes.
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/ts1374
Regards,
-Norm G.

Similar Messages

My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore

My touch screen on my ipod Nano, Generation 6 has gone completely white. I can still play music if I "accidently" touch the right icon. Does anyone know how I can fix this. Also I have 2 other ipods that i can't sync anymore, it says they are not compatib

My touch screen on my ipod Nano, Gen 6 has gone completely white. It had started going white the day before. I tried resetting it but to no avail. Does anyone know how I could fix this. Also I have 2 other ipods that I am no longer able to sync. It comes up with a message (best I can remember) something to the effect that my itunes version is not compatible with my ipod. Please help. I'm tired of buying new ipods when the new hasn't even worn off of them!!!
Thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have windows 8 and itunes 11.0.2 and the the quality of the playback of my tv shows is choppy, does anyone know how I can fix this?

I just recently got a new laptop with windows 8 and downloaded itunes 11.0.2. I downloaded my tv shows from the cloud to the laptop and the playback was awful...the audio was fine but the video is choppy and couldn't keep up with the audio. I thought maybe it was because I downloaded it from the cloud and it was a different version of itunes so I downloaded different TV shows from the store and it was the same problem. Does anyone know how I can fix this?
Thanks
Shanon

I found this is another thread - same issue.
Re: iTunes has stopped working. Why?
Sep 11, 2013 6:07 AM (in response to thurdy)
Resolved!
After contacting Apple, I received a reply from their engineers:
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
And that did the trick.
Message was edited by: Stryder777

I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?

I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?

Deauthorizing won't delete anything, and all your purchased content is safe. You will just have to reauthorize any of the other computers that get deauthorized along with your computers old machine id.
To get your purchased content back on that computer, just use iTunes to redownload it (http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US). Of course, music you ripped from CD or got from another source you'll need to copy those files back over.

I recently purchased an iMac and transferred all of my documents etc. from my Macbook Pro, but now it seems as if some of my photos are distorted and squished. Does anyone know how I can fix this?

I recently purchased an iMac and transferred all of my documents, photos etc. from my Macbook Pro. Everything seemed fine until I opened iPhoto and now it seems as if some of my photos are distorted and squished. Does anyone know how I can fix this?

How did you move your iPhoto Library from the old Mac to your new one?
Do the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.

My laptop says it is connected to our wifi but it also says alert: you are not connected to the internet! Does anyone know how I can fix this/has it happened to anyone? Thanks

My laptop says it is connected to our wifi but it also says alert: you are not connected to the internet! Does anyone know how I can fix this/has it happened to anyone? Thanks

This usually indicates a problem with your router or cable modem, your ISP's service or cabling outside your house. First thing I'd try is rebooting the router/cable modem (turn it off, wait 1 minute, then turn it back on).

I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?

I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?

That pretty much eliminates all the user-serviceable parts the phone has.
When you say you purchased a new battery, I'll assume that it included the installation and you did not go fiddling with the nanoscrews and such. So it's got to have some sort of warranty that the part is good and it is time to take it back for service.

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Acrobat scans each document twice - does anyone know how can I fix this?

Hi Everyone!
I'm using Acrobat 9 Standard and when I click on Create and select PDF from Scanner it always scans the page twice and then I have to manually delete the second page. It's kind of a pain because it takes twice as long, and when I have several pages it's really annoying. Does anyone know how I can change this so that it only scans each page once instead of twice?
I'd really appreciate any help anyone can give me!
Thanks,
chellie

Hi Ravish!
I am using a CanoScan N1220U, and I believe it's a TWAIN driver.
I haven't had any luck using another application because they will only scan an item as a jpeg and for this project I need .pdf files. The applications I tried were Roxio Creator 2009 and Adobe Photoshop Elements 6.0. The only solution I've found so far is to stop the second part of the scan so I only get the one page.
I hope this info helps you come up with some kind of answer for me. I really appreciate your help with this!
Thanks,
chellie

I was listening to a station on iTunes radio and now my library is empty. Does anyone know how I can fix this?

I was done listening so I closed iTunes and eventually I shut off my computer. But the next time I turned it on and opened iTunes my entire library was empty, and the playlists were set to the system default. I tried doing a system restore to my laptop but that didn't change anything. I'm really hoping there's a way to fix this without reloading my entire library song by song, or (and this is the absolute last resort) contacting Apple. Does anyone have any suggestions? I would greatly appreciate any help!

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''
Or, create a new Profile. 
http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

I tried to soft reset my ipod touch with the top button and the screen button. it turned off and went to the blue screen with the apple. now it won't do anything-it has stayed on that scren for 4 hours now. does anyone know how i can fix this?

i tried to soft reset my ipod touch with the top button and the screen button. it turned off and then went to the blue screen with the apple like it should. however, it now just stays on that screen. it has a sort of clock looking thing at the bottom of the apple that does not move either. it has stayed on this screen for over 4 hours. i also can not hard reset it in itunes. i am not really goood at this sort of thing. does anyone have this problem or a possible solution? thanks

See Here for
Frozen or unresponsive iPod touch
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the iPod Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I have to "force quit" every time I use iTunes or mail,does anyone know how I can fix this?

When I use iTunes for more than a half an hour and when I use Mail at all,my computer won't shut down or log off unless I Force Quit those programs.It used to only happen once in a while,but lately it happens every timeI use them.Any suggestions on how to fix this problem would be welcomed.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My iphone 4s won't sync. I'm getting error 50. Does anyone know about how to fix this?

my iphone 4s won't sync. Get error message -50. Any ideas?

From http://support.apple.com/kb/TS3694:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

TS2634 My EarPods keep randomly turning down the volume when I'm listening to music?!?!? does anyone know how I can fix this, or will I have to invest in a new pair?

this is so annoying! I will have my volume at the usual 6, and I'll listen to music and i won't touch anything but it turns the volume down until eventually there is no sound. this does not occur without the EarPods.

If still in warranty return to Apple for evaluation
Worth trying a restore of iPhone to eliminate a software issue ...and
Do they work in other devices

I'm trying to burn a voice memo that i have saved in my itunes to a CD, but its saying there is an unknown error. Does anyone know a way to fix this?

Similar Messages

Maybe you are looking for