I'm trying to charge my phone.
I'm trying to charge my iPhone 4, I plug it in and the green battery appears on the lock screen but on the betters in the corner it shows up with the plug, like when the phone is fully charged. I've turned it off and reset my phone by pushing the power and home button, nothing helps. How do I fix this?
Does the device charge when plugged up to a computer via USB? Have you tried multiple USB ports?
If it does then check your wall adaptor.
If it doesn't and you've checked more than one USB port, move on to my next question.
Is anything stuck in the dock connector? Pocket lint?
If so, use compressed air to blow it out.
If not, move on.
Is the cable damaged in any way?
If so, replace.
If not, move on.
Has the device been damaged in any way? Liquid exposure? Drop?
If so,
If not, then you probably have a dead battery - contact Apple.
Similar Messages
-
Unable to charge I phone 4s remains dead , can I get a new battery installed ?
Yes still nothing, it was showing 50% then crashed out for no reason. Now nothing
-
Trying to charge my iphone but the apple logo goes ond and off
I am trying to charge my phone, and when I plug it to the mains or my pc wont charge, the apple logo comes one for seconds and goes off, the phone just got a new battery, what can I do?
It needs to be dried out. Stop using it.. don't turn it on. Put it in a zip lock bag with some rice or one of those packets of dessicant for a day or two. That might do it.
i
(And stop taking it into the sauna... or swimming) -
HT1454 my charger is not charging my phone
My iphone 5 cable is not charging my phone what should i do?
Hello edgarter8,
It sounds like you are trying to charge your phone with the cord that came with it. I recommend trying the steps from the article named:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
Thank you for using Apple Support Communities.
Regards,
Sterling -
When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find in the support discussions but nothing has worked. Any other suggestions?
If you have carefully follow ALL of the steps in that article, you are using a USB port directly on your computer and not a USB hub (don't use a front port on a tower or desktop either, as they are an internal hub) and you installed iTunes correctly using an Administrator ID and you have tried disabling your antivirus and firewall then there is no hope of it ever working. Look at the tip again, and go through it carefully, not skipping any steps.
Note, BTW, that an iPhone will not show up on a computer, only in iTunes. If there are photos in the Camera Roll then it will appear in Windows as a digital camera only. -
I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!
This is covered in the basics section.
A restore loses nothing.
A restore does. If you are using the iphone as designed, then everything should be on your computer. -
Hello. I have a new Iphone 5S and the charger taht came with the phone doesn´t charge my Iphone. The cable is good because I´m charging the phone via my PC. I tried every recomendation posted here but none helped me...I live in Argentina and we don´t have local support here, I would´ve ask for a new one but it´s not an option here. Does anyone know what can I do? Thanks in advance. Regards.
I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport" it replies it cannot locate it)
I suppose everything will be fine when you'll be out of censorship....
Perhaps iOS Apple Maps are absolutely useless for expatriate in China.
Use Google Maps instead
BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top! -
hi...i'm still using the old iphone 3G...my phone is no longer charging...when i tried to charge it, what i see on the screen is the usb cord with the arrow pointing the itunes logo...can someone help me?
It sounds like your phone is in recovery mode, which means it needs to be restored through iTunes on your computer in order to get out of it.
-
my power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like i usually does but it's not turning on
Hold down on the home button simultaenously holding on the sleep wake button (power button) hold it for more than 15 seconds this will then shut down the device.
If the device is already shut off do this same sequence to see if you get an apple logo. If you get the logo allow the device to login. Write back if this does not resolve your issue.
Good luck Friend. -
After trying to charge my iphone, I'm getting a picture of the USB plug on the bottom with an arrow pointing upwards to an itunes icon, but I cannot get phone to go to it's normal display. Please help.
Put the device in DFU mode (Google it) and restore.
-
Trying to charge the iphone 3. When connecting charger, receive message " charging is not supported by this accessory". Three chargers tried and do not work. Blew all connectors clean with compressed air. Battery charging icon does not show when plugged in and phone slowly losing power.
Clean iPhone charging port with clean toothbrush and small amount of Isopropyll Alcohol. Clean very well especially on top of the midrib which is where the pins are.
-
My iphone 4s will not turn on, It was working properly and then I noticed the battery was at 1% I then proceeded to charge my phone like normal but nothing happened. The phone was unable to turn back on it's been two hours I already, tried to reset but nothing works. I tried different chargers, my ihome nothing is working.
.
-
I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
What I should do now?Something has gone wrong. Turn your phone off, then force it into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new". -
Hi! My friend told me that her iPhone 5 has problem and the charger is not charging. I gave her mine, but doesn't worked on her too. After that I tried to charge my iPhone 5 and it doesn't work on my phone too. Have you any idea ?? What to do ??? Thanx !
But of course I'm sure! I went to the local apple store and they replaced my charger ! Thank you!
-
My I phone 3gs will NOT turn on or charge.... I've tried different charges and it will not notice in itunes please help me apple
We here are not representatives or employees of Apple. Looks like your iPhone needs to visit an Apple store for a consultation. Make an appointment.
Maybe you are looking for
-
How to clear the Managed Bean Values prior to load a JSF page
Hello. I have a jsf page that contains fields that need to be cleared BEFORE the page is loaded. My managed bean where the fields are linked (I�m using the value attribute) is in the SESSION scope because I need to control they values across a popup
-
Solve problem of exchange rate
enter rate INR/USD rate type M for 09.04.2008 in the system setting.. pls solve it With Regards Prasanta Kumar Sahu
-
Desk top software v7 does not update to show correct version of playbook os
Password problems caused the playbook the reset, I had backed up the playbook. I updated the playbook to os2 and when I connect to desk top v7 it shows that I do not have os2 on the playbook and wants to update it. The udate always gets an error at b
-
Run a report in report builder connect with dynamic nav developpement
I can't run my report for testing it in report builder app. Each time i have to save it, close report builder et run the report i create in dynamic nav developpement. It is possible to run the report create in report builder directly? In report build
-
MAS: resolving collisions in productive system
Hello experts, I've upgraded my mas productiv system to 50sp11 and now I get the same collsions as in test mas (50sp11). I've already transported the changelist with the resolved collsion from testsystem but I still get this collsions in prod system.