I'm trying to connect a subVI with my VI, they both share common variables and the subVI is not reading one of the variables from the main VI...
I can't figure out why the subVI will not read this one particular variable from the main VI. How can I figure out how to make sure these two VI's are communicating properly?
Yes, please post example.
We could probably give you an answer rather quickly if you did.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Similar Messages
-
I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?
Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same. -
I had an iMac with Snow Leopard 10.6.8, I downloaded and installed Lion, did not make me any questions. After the reboot I get this fatal error: Panic(cpu 0 ......) Kernel trap ......
Please post the Kernel Panic report. You will find it at /Library/Logs/DiagnosticReports per
http://support.apple.com/kb/ht2546
When we look at the KP report we may find some clues why it is occuring. -
Wanted to load an app onto my wife's ipad. BUT, the program keeps saying I've already purchsaed it and will not let me purchase again. I've tried everything I can think of. Now looking at wiping ipad competely and starting over but not sure that'll help. Between the time I purchased the app and now, I had to change password's w/Apple (Stupid system in the first place IMO) and it doesn;t liek new password
I can find the app, but the free version only. I paid for the upgrade ($1.99) on my ipad and now I want to add it (or buuy it) for my wife's ipda, but it will not allow me
-
I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?
The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan. -
I am trying to connect my iMac with my MacBook What is the command keys and process in doing so. Have firmwre in place.
Here's the Apple Support article on Target Mode http://support.apple.com/kb/HT1661
-
hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from Argentina someone could help me
Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue. -
Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone adviceHi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle -
I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?
Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer. -
Hi there can anyone help me out. I have Apple TV and I am trying to connect wirelessly through a zyxel wireless hotspot gateway, I know a tad extreme but a friend had one free, anyway I can find the router but no Internet connection?
The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ... -
Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !
recently had update
Care to share which update?
Have tried many things
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios. -
If I'm connected in wifi with my Macbook, can I share the internet with Iphone? Thanks
If I'm connected in wifi with my Macbook, can I share the internet with Iphone? Thanks
If you are asking about the Internet Sharing feature on the Mac, the answer would be that this option is not available for normal wireless, but it might work for BlueTooth. Might be worth a try that way.
However, if the Mac had an Ethernet Internet connection, then you could create your own "private" wireless network to allow wireless devices to connect. -
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay? If any one can help please before I throw it through the window!
Grum12 wrote:
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay? If any one can help please before I throw it through the window!
Hi Grum,
If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
Jerry -
Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.
If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
Post back on your results. -
I need help installing Lightroom 5. I tried the trial and it does not have an uninstall feature. Thus, I'm trying to activate with my new $9.99 per month subscription and it simply will not work. Very frustrating you already took my money and no results, and very difficult to get help.
Lightroom Trial uninstall wrote:
Very frustrating you already took my money and no results, and very difficult to get help.
Just for clarity, "we" haven't taken your money - this is a user-to-user forum, and you're not talking to Adobe.
Like Rob I'm a Windows user, and - like him - I thought "uninstalling" on Macs was simply a case of trashing the application. Google would seem to concur.
Not really a Lightroom/Adobe issue, then?
Maybe you are looking for
-
Well, after trying to figure out what was going on with iTunes not opening at all. It turns out that by default for some reason Windows Xp Firewall disables it from opening it. iTunes however is acting like a server for the fact that you exchange dat
-
Add fields in "customer fields" at item level
Hi experts. Please i need a help. Im using the SAP CRM 5.0 win client. I will use the EEWB method to add new fields at the item level (CRMD_CUSTOMER_I). I believe that these fields will appear in the "customer fields" tab, but this tab isnu2019t disp
-
Long phone call, backlight problem.
Well sometimes i have long phone calls to deal with, say for around 3-4 hours. When i want to end the phone call i obviously move the phone away from my ear and press the "End Call" button. Problem is, that the backlight doesnt come on. I dont know w
-
Cannot Import Calendar To Exchange Account
I have a clean Office 365 account and have exported an existing Calendar as an ics file but when I try to import it to Exchange, it warns about changing some information headings, then complains about overlapping and recurring events (Unless its coun
-
Text objects contain random characters
Post Author: RobR CA Forum: General Greetings! I am running into an extremely irritating problem with CR XI: text objects on my report are printing random characters. This happens in print preview and in printing the report, but the one time I trie