I'm trying to connect my wii to the mobile hotspot on my iPhone 4s.

The wii recognizes my phone as an access point and takes the code but then won't connect.  Any advice is appreciated.

Was the gift card issued in the same country as your account is based (cards can't be used in other countries) ? If it was issued in your country then see if this page helps : http://support.apple.com/kb/TS1292 - and if it doesn't then your could try contacting iTunes support as described on that page.

Similar Messages

  • Can I connect my Wii to my personal hotspot using my iPhone 5s?  Wii finds access point but getting code 51330 after putting in correct password.

    >

    I probably should have been more specific in my first post.  I have tried various corrective steps including the ones found at this link.  Below is the network event log entry from the failed attempt to connect.  As you can see, the connecting system can see the hotspot but can't get the hotspot to answer roll call.  It thinks it might be a signal strength issue but in fact it has a strong [all 5 bars] signal.
    ==========================================================================
    Diagnostics Information (Wireless Network Adapter)
    Details about wireless network adapter diagnosis:
    For complete information about this session see the wireless connectivity information event.
    Helper Class: Native WiFi MSM
    Initialize status: Success
    Information for connection being diagnosed
    Interface GUID: 2aaaf9c6-d20f-4ac7-b82e-3da56a3c56f7
    Interface name: D-Link DWA-556 Xtreme N PCIe Desktop Adapter
    Interface type: Native WiFi
    Profile: Discovery connection
    SSID: Howard's iPhone
    SSID length: 15
    Connection mode: Infra
    Security: Yes
    Connect even if network is not broadcasting: No
    Result of diagnosis: Problem found
    Root cause:
    Wireless association to "Howard's iPhone" failed
    A response was not received from the router or access point.
    Detailed root cause:
    Wireless association to this network failed. Windows did not receive any response from the wireless router or accesspoint.
    Repair option:
    Look for causes of low wireless signal quality
    The signal is weak due to distance or interference.
    Windows Help and Support can provide more information about this problem.

  • Tries to connect multiple times at the same time a...

    Tries to connect multiple times at the same time after trying to reinstalling software.

    Hello,
    Assuming that you use a Web version (this information MUST be provided in any post), you have 2 ways to run reports:
    1. the Run_Report_Object built-in
    2. the Web.Show_Document() built-in
    Francois

  • Hi there can anyone help me out.  I have Apple TV and I am trying to connect wirelessly through a zyxel wireless hotspot gateway, I know a tad extreme but a friend had one free,  anyway I can find the router but no Internet connection?

    Hi there can anyone help me out.  I have Apple TV and I am trying to connect wirelessly through a zyxel wireless hotspot gateway, I know a tad extreme but a friend had one free,  anyway I can find the router but no Internet connection?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • I am trying to connect my PSP to the interent via my Wire...

    I am trying to connect my PSP to the interent via my Wireless router with no success. Does anyone have any ideas what I can do? The Router is WPA enabled and I've entered the correct key on the PSP but still no joy! help!

    hi...let me know the model and the version no. of the router that you are using...also tell me the ISP details, so that i can tell you step by step configuration...

  • OBIEE 11G - The database Weblogic is trying to connect to is refusing the connection.

    Hi,
    The database Weblogic is trying to connect to is refusing the connection, per my error messages. Which file will have the JDBC connection information?
    Thanks for your time and help.

    Can u paste the error log messages?

  • I just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone

    i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes

    No support for jailbroken phones will be given in this forum or from Apple.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and…

  • I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks fo

    I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks for any help you may provide

    hi,
    somewhere on the windows machineshould be something like "network setup wizard". exactly where it is and what it is called i cannot remember off the top of my head, windows help is actually slightly useful here, it should have a link to it.
    all the options checked on the mac are only what services the mac is offering to other machines, they have nothing to do with the services it can access (mostly...).
    oh yeah, to actually connect to the pc after you have turned its sharing on, use the finder, or, when it does not show the pc (this happens on and off, possibly a refresh problem apple...) choose go --> connect to server and enter smb://<pc's name or ip>
    to find the ip, the easiest way i think is
    start --> run --> cmd ->> ipconfig
    Andrew
    Message was edited by: Andrew Dicker

  • Cannot connect Nexus 7 to Rezound mobile hotspot

    Hello,
    I switch to VZW Share Everything which includes the Mobile Hotspot. I cannot get my Nexus 7 to connect to the mobile hotspot. I keep getting the message that there is no Internet. The hotspot turns on fine on the Rezound. I can get it working with some difficulty while at home but when Ieave home I have the problem. My N7 shows it's secured to the VZW hotspot network with WPA2. I've tried inputting my cell phone number as the password and then it hangs on Obtaining IP Address. What am I doing wrong???????????
    Thank you,
    Deb

    I too have been trying to get the Nexus 7 to connect to my Rezound with zero luck...
    I am using an <deleted> rezound and it is on the most current software using a a tiered data plan.
    It makes every effort to connect but when attempting to get an ip address, if fails...
    anyone get an answer yet?
    <Post edited to comply with the Verizon Wireless Terms of Service.>
    Message was edited by: Verizon Moderator

  • Im trying to reorder divs when in the mobile version of my site, is it possible to do it with media queries?

    Im trying to reorder divs when in the mobile version of my site, is it possible to do it with media queries? Here is the layout in desktop view, red being what would be images. And when i rescale, the content stacks together to place two of the same boxes together, like so;
    Is it possible to apply a rule so when scaled the boxes reorder to show red, black, red, black, red, black?

    <div class="productcontainer3">
    <div class="product3"></div>
    </div>
    <div class="productcontainer4">
    <div class="product4"><h6>Manta Soledo</h6><p1>In here will be the Manta blurb! Not too much technical info, save that for product page. Make it sleek and elegant. </p1></div>
    </div>
    <div class="productcontainer1">
    <div class="product1"><h6>Manta Soledo</h6><p1> In here will be the Manta blurb! Not too much technical info, save that for product page. Make it sleek and elegant.</p1> </div>
    </div>
    <div class="productcontainer2">
    <div class="product2"></div>
    </div>
    <div class="productcontainer5">
    <div class="product5"></div>
    </div>
    <div class="productcontainer6">
    <div class="product6"><h6>Manta Soledo</h6><p1>In here will be the Manta blurb! Not too much technical info, save that for product page. Make it sleek and elegant. </p1></div>
    .productcontainer1 {
      float: left;
      clear: both;
      max-width: 604px;
      width: 49%;
      margin-right: 1%;
      margin-bottom: 4%;
      margin-top: 1%;
    @media all and (max-width: 600px) {
    .productcontainer1 {
      width: 100%;
    .productcontainer2 {
      float: left;
      max-width: 604px;
      width: 49%;
      margin-bottom: 4%;
      margin-top: 1%;
    @media all and (max-width: 600px) {
    .productcontainer2 {
      width: 100%;
    .productcontainer3 {
      float: left;
      clear: both;
      max-width: 604px;
      width: 49%;
      margin-right: 1%;
      margin-bottom: 4%;
    @media all and (max-width: 600px) {
    .productcontainer3 {
      width: 100%;
    .productcontainer4 {
      float: left;
      max-width: 604px;
      width: 49%;
      margin-bottom: 4%;
    @media all and (max-width: 600px) {
    .productcontainer4 {
      width: 100%;
    .productcontainer5 {
      float: left;
      clear: both;
      max-width: 604px;
      width: 49%;
      margin-right: 1%;
    @media all and (max-width: 600px) {
    .productcontainer5 {
      width: 100%;
    .productcontainer6 {
      float: left;
      max-width: 604px;
      width: 49%;
    @media all and (max-width: 600px) {
    .productcontainer6 {
      width: 100%;
    .product1 {
      Width: 100%;
      padding-bottom: 50%;
      float: left;
      background-position: center;
        background-size: cover;
        background-repeat: none;
    .product2:hover {
      background-image:url(../Graphics/iMod-rollover.jpg);
    .product2 {
      Width: 100%;
      background-image:url(../Graphics/iModindex.jpg);
      padding-bottom: 50%;
      float: left;
      background-position: center;
        background-size: cover;
        background-repeat: none;
      -webkit-transition: background-image .8s ease-in-out;
      -moz-transition: background-image .8s ease-in-out;
      -ms-transition: background-image .8s ease-in-out;
      -o-transition: background-image .8s ease-in-out;
      transition: background-image .8s ease-in-out;
    .product3 {
      Width: 100%;
      padding-bottom: 50%;
      float: left;
      background-position: center;
        background-size: cover;
        background-repeat: none;
      background-image:url(../Graphics/Ilanoindex.jpg);
      -webkit-transition: background-image .8s ease-in-out;
      -moz-transition: background-image .8s ease-in-out;
      -ms-transition: background-image .8s ease-in-out;
      -o-transition: background-image .8s ease-in-out;
      transition: background-image .8s ease-in-out;
    .product4 {
      Width: 100%;
      padding-bottom: 50%;
      float: left;
      background-position: center;
        background-size: cover;
        background-repeat: none;
    .product3:hover {
      background-image:url(../Graphics/Ilano-rollover.jpg);
    .product5 {
      Width: 100%;
      background-image:url(../Graphics/Soledoindex.jpg);
      padding-bottom: 50%;
      float: left;
      background-position: center;
        background-size: cover;
        background-repeat: none;
      -webkit-transition: background-image .8s ease-in-out;
      -moz-transition: background-image .8s ease-in-out;
      -ms-transition: background-image .8s ease-in-out;
      -o-transition: background-image .8s ease-in-out;
      transition: background-image .8s ease-in-out;
    .product5:hover {
      background-image: url(../Graphics/Soledorollover.jpg);
    .product6 {
      Width: 100%;
      padding-bottom: 50%;
      float: left;
      background-position: center;
        background-size: cover;
        background-repeat: none;

  • Connect my Wii to The internet

    HELP!!!!
    I have A a linksys WRT54G2 and am trying to connect it to my wii. I had my Wii search for an access point And it found my router. I put in my password and it was accepted but I am still Not Connected to the internet. WHAT AM I DOING WRONG????!!!!

    hi migda4498,
    what seems to be the problem that you have?
    if you have problem connecting wii to your network, follow the instructions in this link

  • I'm trying to connect ipod touch to the computer

    I'm trying to connect my daughters ipod touch to the computer it makes all the beeping noises and is charging but isn't found on iTunes so I can't add anything to it or sync it. It was last synced in January this year. My other daughters iPod touch connects fine.
    What has happened and how can I connect it???????

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT5299 Can I connect a wii to the Thunderbolt?

    I'm about to purchase a wii but don't have a tv.  Can someone explain what I need to purchase so I can connect the wii to the Thunderbolt display?  There's so much conflicting information and I'm not a techie at all! 

    A Thunderbolt display has to plug into a Thunderbolt port.  There are no adapters that will make it work with anything else.

  • N86 that is trying to connect to Network ALL the t...

    My n86 8MP are trying to connect to a network ALL the time. Even when i have turned of to NEVER at Tools, Connection Wireless LAN,  and Internet connection test.
    There is no program open i background either.
    What can that be?
    Could it be my Email program Check interval? Even if the email program are totally closed?
    //memory
    Solved!
    Go to Solution.

    If you have set the email to check at certain intervals, it will check during those intervals. You cant totally close email app. Once you have configured it, its like a text message, it will work continuously. The only way to stop it is to set the email check to manual.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • N8 Tries to connect to net all the time

    I've tried everything. I have even deleted the access points in Destinations for all my Celullar data.
    This is what I have done (step by step).
    Issue - Trying to totally kill Cellular Data connection
    Steps taken
    1. Switch network to GSM only mode (EDGE will still be available apparently - Whay is that?)
    2. Went to Connectivity settings and changed the data usage in Home Netwrok to "WLAN Only"
    The double arrow is now gone (no data connection) but I am now getting this error message (as if it's trying to cycle through all the available operators access points settings such as internet, WAP, MMS and Streaming) and since I only allowed WLAN, can't find anything so getting this Connection Failed, Acess Denied box near the Signal bars
    So I figured that some widgets or application is trying to access the net.
    Steps taken
    1. Removed ALL Widgets except the shortcuts and things that I know does not need the net.
    Still not working, still getting the Connection error ...
    Steps taken
    1. Removed the GMail mailbox since there is no option for Manual retrieval for Gmail (what the heck is up with that?)
    Still not working - Still getting the error.
    Steps taken
    1. Rebooted the device and saw that Whatsapp is running automatically from restart. Checked the settings. Yeap, it's setup to look for Cellular Signal. Changed that to Wifi.
    Still getting the damn error!!! Maybe need to restart the N8
    Now waiting if I am still getting the error .......
    Any other apps that I should look into? I've only downloaded like 15 apps since I bought this.
    I get a strange feeling that with all this issues I have, I now see the wisdom in Apple Review Process for their App Store. All sort of cow dung is in the Ovi Store and it's causing all sort of grief to the end user.
    The pendulum is swinging so far to my iPhone it's not even funny.
    EDIT: Just as I post this message, I get the error message again .... seriously Nokia? Come ON!!!! Give me a toggle button to kill Cellular Data and make sure that once that is off, I don't get all sorts of error message.

    WhatsApp tries to connect to the internet constantly, no matter what you do.
    I had it installed and it was doing the same thing, it didn't stop until i uninstalled it. There are other Apps that do this too, but I don't know what they are.
    It's not the phones fault that you downloaded an App that requires the internet, and its not Nokia's fault the App requires the internet.
    Hit the white star if I have helped you =]

Maybe you are looking for

  • Flags in mail

    I'm having trouble in Mail with the flagging feature.  I had a bunch of emails flagged.  I have since removed the flags, but they still show up in the "flagged" smart mailbox.  When I looked at them in there they are no longer flagged though.  In the

  • AR cash receipts postings analysis

    Our auditors want to confirm 2010 Accounts Receivable balance by analyzing subsequent cash  receipts in 2011.  They want to know from the AR cash receipts received in 2011 what total dollar amount applies to 2010 AR documents.  I ran the report S_ALR

  • Queries are not opening in BW prod.

    Hi all, We have transported all the queries to BW Prod, but when we are trying to execute it we are getting the error "An error occurred in the communication with the BW server" and the selection screen is not coming .. Can anybody help me in this re

  • Sharing photos-iPad and MacBook with different users-help!

    My sister has a 1st gen iPad and I have a MacBook Pro.  She has my wedding pictures on her iPad.  How do I get them onto my MacBook?

  • Excel to XML for spry

    O.k. i am a designer and i can see the benefit of spry big time in my work flow. BIG TIME. But i have a client site i am working on that has a bunch of data but its all in excel files. Right now to make useful web pages out of it i am using web merge