I'm trying to download the firmware update for the WRT54G...

I'm trying to download the firmware update for the WRT54G version 6 router but I receive the error message that Internet Explorer is not able to open the internet site. It suggests that it is unavailable or cannot be found.  I've tried accessing it  numerous times with the same error.  Any thoughts on this?

are you online through the router ?? if not , connect the computer directly to the modem and go to www.linksys.com/download to download the latest firmware for the router ..

Similar Messages

  • When will the firmware update for the Note 4 be released to support the Gear VR?

    I will need to look at purchasing on another device on another carrier depending on timing.    (Cross checking the Oculus and Samsung dev boards as well)

    Mihos wrote:
    Note 4 update just showed up for my phone a few minutes ago.  Installing now. They really need to communicate these things with the support agents so they can communicate better with us.  We need information to make decisions.  I can say right away, a Verizon device will never be my lead platform for development for this reason alone. Especially when the script for response leads to a link to a page that has nothing to do with phones, much less firmware update information.  This is, in fact, the NJ5 update, so it should work, I will verify for the support techs and the community when I get back to the lab. (I eat lunch sometimes, contrary to popular belief.)  Thanks for whoever prioritized this internally.
    Apparently it was JUST released. http://www.droid-life.com/2014/12/10/verizon-galaxy-note-4-update-vru1anj5/

  • Last night i was downloading the new update for the Iphone, and after the download was done and trying to install, it errored out.  And now my phone is stuck on the screen with the itunes icon and the USB.

    Last night i was downloading the new update for the Iphone4 on my laptop through Itunes.  After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it.  Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else.  Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.

    slawdog31 wrote:
    Is the sleep wake button at bottom center of the Iphone or on top?
    Top
    iPhone User Guide

  • Does the new 7.1.1 Itunes update have a firmware update for the 3G?

    Hello, I downloaded the new i-tunes update, does it have a firmware update for the I-phone 3G? and if so can anyone tell what it is? and what bugs it fix's? Thanks....

    Release notes state only “iTunes 7.7.1 includes fixes to improve the stability and performance.
    no firmware update for iphone

  • Software and firmware updates for the Zen Vision M 30 gb.

    On the Creative support homepage I can find the software and firmware updates for the Zen Vision M 60 gb, however, there is nothing listed for the 30 gb unit. Where can I find the software and firmware updates (downloads) for the 30 gb unit's

    http://support.creative.com/Products...me=MP3+Players

  • HT1688 I am trying to do the latest update for the iphone and it's telling me to restore

    I am trying to do the latest update for the iphone and it's telling me to restore

    If you are getting that message connect to itunes and restore. 

  • Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?

    Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?

    I have a few of these RAID cards in a couple servers, and then I have an earlier version of the RAID card in a few different servers.
    The earlier servers are running non-apple 1.5 TB drives. It will be interesting to learn if this firmware update will indeed allow me to boost the capacity by installing non-apple drives, as the firmware previously has not.
    Ohh I'm excited to update and try! This will greatly help out if it does!

  • Has anyone received the new update for the X6?

    has anyone received the new update for the X6 with the updated browser? what is the firmware version?
    Greece Nokia X6 RM-559 v40.0.002

    I agree with Vinimutta!!
    *slide to unlock with digital clock & sms & missed call notification
    *support for homescreeen widgets
    *qwerty keypad in portrait mode
    every single update so far was pathetic attemp to fool us and make us happy.
    there is no change at all from v30,31, and 32. exect the slightly smaller font for text input in v32.
    nokia promises alot in the new update, (browser, smiler and map)
    hope it leaves up to the expectation and include the portrait qwerty,homescreen and lockscreen.
    Why is it so hard to implement?
    slide to unlock and homescreen is already available in c6, and the portrait qwerty is available in 5800.
    its no like we are asking for impossible like continuous autofocus for video recording!!

  • Hi, i need help, okay..my issues is that since the lastest update for the ipod touch, my music lihow can i get the itunes main music playlist to appear the same on my ipod touch?

    Hi, i need help, okay..my issue is that since the lastest update for the ipod touch, my music list is all over the place....my question is how can i get the itunes main music playlist to appear the same on my ipod touch?

    Hi Lawrence,
    Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´   Those were good days..... What a City

  • The delta update for the InfoCube ZCUBE is invalidated

    Hi BI Experts,
    I am working on BW 3.5.
    For the datasource 2LIS_13_VDITM there were some requests(deltas) missing for 3 days.  So I got all the documents there were missing or not updated in BW. I deleted the setup tables and filled them with the new document numbers.
    I did a full repair request from the Infopackage level and the data got updated in ODS.
    But the DM Status is missing for all the requests in the ODS.
    And the data for the full repair request didnt get updated in the Cube and I got the following error:-
    The delta update for the InfoCube ZCUBE is invalidated. The can be due to one of the following:
    1. A request, which was already retrieved from the target system, was deleted from the InfoCube.
    2. A request, which was not yet retrieved from the target system, was compressed in the InfoCube.
    And the following delta was also not successfull.. How can I clear up this mess and ensure smooth flow of deltas. How can I set the DM status.
    Thanks
    Kumar

    Thanks for your reply.
    When I did a Full Repair Request on the ODS the data is in the New table and the DM status got reset(vanished). And the following day delta got failed( data for that request did not get updated in ODS and Cube)
    How can we bring back the DM Status and make the deltas successfull.
    Thanks
    Kumar

  • Is there any news about when the software update for the extravert will be available?

    Had the phone since November and can't send or receive media messages or go on the internet. Basically there doesn't seem to be enough memory, stripped the phone of all apps, pics,and music to free it up but still say's it full. Getting vague answers from Verizon and L.G of  there will be new software soon. On the unlimited plan and can't use everything I'm paying for. Thanks

    To supplement the known information about this update, I found a post from LG regarding what this update addresses:
    http://www.lgforum.com/forum/boards/carriers/verizon/topics/anyone-know-what-the-software-update-for-the-lg-extravert-did-and-camera-issues
    1. Memory issue
    2. Fixed touch is wrong behavior
    3. Add option to Re_send MMS to failed recipients
    4. New PRL 57011
    5. Update Opeara mini browser(189 --> 191)
    6. Reset when MMS receive after Spanish set
    7. Occurred noise to mono headset connect to MP3 play
    As far as I can tell, the Camera issue wasn't addressed.  It takes awhile for the Trouble Ticket to work it's way through the system, so maybe they didn't get it in time for this update. [...]"

  • Has Apple pulled the SMC update for the Macbook Pro Retina from the App Store

    Does anyone know if Apple pulled the SMC update for the Macbook Pro Retina? I can no longer see it as an update in the app store. I am refering to the update that enables power nap on the Macbook Pro Retina.

    It showed up in my ML App Store.
    What is your SMC version?
    Mine is
    SMC Version (system):          2.3f28
    and I don't have the update installed.
    Message was edited by: psedog

  • I get error message -3259 when trying to download Version 5 update for I  pad, yet the internet connection is still operational. Why is this?

    When trying to upload Version 5 update for IPad after the download is complete and the files are being processed I get an error message - 3259 which says the internet connection is timed out but in fact it is still operational. The download is unsuccessful. Why is this?

    Try temporarily turning off your firewall and antivirus software until the download has completed.

  • So did the firmware update fix the 7200rpm drive noise/stalls?

    Apple releases MacBook Pro hard drive firmware update
    A new firmware fix for some MacBook Pro hard drives aims to stop random noises, perhaps bringing relief to some who have been plagued by clicking and beeping internal drives.
    Hard Drive Firmware Update 2.0 was released Wednesday for some 7200rpm drives. It is intended for June 2009 model MacBook Pro systems. The 3.71MB update requires Mac OS X 10.5.7 and will update the drive firmware to 0007APM2. It can be downloaded direct from Apple.
    Apple says the update "reduces certain infrequent noises" made by the drives. Last week, the Mac maker officially acknowledged noisy hard drives that have been plaguing some MacBook Pro owners for months. Prior to the public confirmation, some AppleCare representatives had told individual customers that the company was working on a fix.
    http://www.appleinsider.com/articles/09/08/19/applereleases_macbook_pro_hard_drive_firmwareupdate.html

    I was able to start the MacBook Pro in Target Mode. Tried to run Disc Utility from my other machine on the MacBook Pro and got the following message:
    Verifying volume "Macintosh HD"
    Invalid node structure
    Volume check failed
    ERROR: Filesystem verify or repair failed.
    This machine is less than 30 days old. I did the check and the updater informed me the Firmware was required. Will call Apple in the AM and get the scoop. I would NOT recommend installing the Firmware Update at this time.

  • How do I install the firmware update for LinkSys E900 router?

    Hi,
    I'm using Mac 10.7.5 and a few months back had purchased the E900 wireless router.  It has firmware 1.0.03 installed and I noticed there is a 1.0.04 update.  I downloaded the update, which is a .bin file, but I do not have a CD burner nor access to a Windows machine.  How can I install the firmware update?
    Thanks, - Dave
    Solved!
    Go to Solution.

    Simple, with your wired computer (never wireless) just access the GUI in the router and perform the firmware update.  Just point to the .bin file and away you go.  Make sure to hard reset the router and reconfigure it after you are done.

Maybe you are looking for