I'm trying to edit a smart object...

I was told to double click the layers window and a new editable window would pop up...but only the FX window pops up. I've also tried the "edit Content" choice but that erases the smart object....What am I doing wrong...Help!

Truth be told...When I watched a tutorial, the window popped up...I didn't realize the new window (CS6) was popping up in the tabs....Double Duh!

Similar Messages

Could not edit original smart object because the application which created the smart object could not be launched

could not edit original smart object because the application which created the smart object could not be launched

Hi there,
I got this problem when I installed Adob master collection Over CS 5.
I had children book story storis which created in Adobe illustrator CS 5 and I created art boards in Adobe photoshop cs 5.
After installting CS 6 i tried to edit the smart objects and it was not opeinging the smart object file in Illustrator.
I did some tests.
1) Right click on smart object layer and click export contents. Save on desktopp or anywhere you want. (I saved on desktop)
2) I had this file on my desktop (Vector Smart Object10.ai) but it didn't show any icon, which program should open this type of file.
3) Double click on the file and it pop up a extension window 'Click on change and select adobe illustrator' and press OK.
4) Go back to your photoshop file and right click on smart object layer and click dit content. now this time it opens up assets in illustrator.
ENJOY!
Thanks
Haroon
www.4d-studios.co.uk

Edit a smart object by a deformation in photoshop

Edit a smart object by a deformation in photoshop
Hello
I'd like to know if it is possible to edit a smart object by deformation (type rotation..) (in
A dynamic layer above another layer (a round for example) when I apply a rotation of the round cela applique on the picture of the underside, of non-destructively
Thank you

Edit a smart object by a deformation in photoshop
Hello
I'd like to know if it is possible to edit a smart object by deformation (type rotation..) (in
A dynamic layer above another layer (a round for example) when I apply a rotation of the round cela applique on the picture of the underside, of non-destructively
Thank you

Edited vector Smart Objects update pixilated in Photoshop

Hello everyone, hope you can help.
I import CS3 Illustrator vector EPSs as smart objects into PSDs which works fine... until I need to edit the smart object. I follow the prompts on screen and double click on the smart object which opens an Illustrator file - edit - and save per prompts. When I return to PSD, smart object looks blurry and pixilated. Only solution I can find is to make the changes again to original Illustrator file and re-import as smart object. I know this isn't the way it's meant to work - probably doing something really silly. Have searched forums and can't find any similar problem which seems to confirm that it's me not the programme.
Any help greatly appreciated.

Hi,
Thanks for getting back. I should have probably mentioned I'm working in CS3.
Re Colour Mode: Both Illustrator EPS and PSD are CMYK.
Re Colour Profile: Not very technically savy about these things. I know that under 'colour settings' the default is for Creative Suite applications to be synchronised for colour management. I double checked and Illustrator and Photoshop are still in sync, and I'm not getting any warning messages when I open the PSD about colour profiles being mismatched or missing etc. After that I'm not really sure what to check next?
Re »Replace Contents« Smart Object: Replacing the contents sorts out the 'blurry' pixilated' issue but leaves me with another problem... because it replaces from the original file - but edits, when done from PS, seem to made to another (imbedded?) file, leaving the original intact. So instead of double clicking on the SO icon in Photoshop to edit a Smart Object, I'll have to open the original vector EPS in Illustrator - edit - save - then replace contents in Photoshop.
Thanks for your help Christoph. I think this one will have to resigned to the 'buggy glitch' file.

Error: Could not edit original smart object ...

Hi - I'm getting the following error when double clicking on a Smart Object in Photoshop (CS4)
"Could not edit original smart object because the application which created the smart obejct could not be launched."
Notes
1. The SO was pasted into the psd file moments before from Illustrator.
2. Both applications are open
3. Both files sit on the same disk.
4. XP Pro.
Does anyone have an idea how to get PS to launch its sister program?
Thanks,
Sean

HI, I just had the same problem with cs5 on win7. Photoshop cs5 would not open a smart object created in AI CS4 into CS5.
Turns out I had, somehow, lost all my file associations to .ai and .eps files. When I went into properties and told win 7 to open .ai and .eps files with illy all my troubles went away.
Hope my solution helps someone else with the same prob.
jeff

Using the edit as Smart Object option.

I'm probably way behind the ball here, but I can't understand how the edit as smart object works. Sure I can open the file as a smart object in PS3, I can, say, apply the Distort/Lens filter to do a perspective transformation - but then how do I save and send it back to Lightroom? Using Export Smart Object just seems to send a file back to Lightroom but my transformation has disappeared. Close and save will create a file - so I still end up creating a new Tif everytime I use PS - but now manually synchronise. Where is the benefit?
I know I need a nice Video Tutorial or instruction but can't find one!
Anyone know of one?
Many thanks. Peter

> Yes, add me to the list of being in need of an explanation of how exactly this is supposed to work. I'm hoping that it might be included in the Michael Reichmann and Jeff Schewe video that I purchased recently but as yet haven't downloaded all episodes.
There's a bunch of free videos on the NAPP site. They have an episode on Photoshop integration too. http://www.photoshopuser.com/lightroom2/
It's pretty clear how it should work from that video, except that it doesn't. Another bug, perhaps.
EDIT: Also it has been mentioned many times that one should have the PS CS3 10.0.1 Patch installed in order to get this going.

Editing as Smart Object Problem

I use LR 2 and Photoshop CS3. When in LR, I choose edit in Photoshop as Smart Object. No problem. I make my changes in PS with no issues, but when I go to save the file, rather than keeping the linkage with Lightroom and simply saving the file back into my stack, It pulls up the Save As diaglog box and asked me where I want to save it. This doesn't seem to happen when I edit a photo normally in PS - just when I do it as a smart object.
Anyone else experience this?

Hi TexKen,
Unfortunately I can't help you here since... I'm experiencing the exact same problem. Same combination of software (running on Windows). Tried experimenting with Smart Objects from Lightroom 2.6 to CS3 and it doesn't take me back to Lightroom.
Anyone, please help us... ;-)
Judith

Extracting an .xmp sidecar from an ACR-edited RAW smart object layer...

Hello all. Given the following situation:
Several thousand TIFF files, each containing two RAW files embedded into separate Smart Object layers. The RAW files were named with sequential numbers prior to being composited into the TIFF files via a script, and the TIFF filenames correspond to those of the embedded RAW files. The RAWs have subsequently been edited in ACR from within the TIFF files.
I've done a little digging, but I can't seem to turn up answers to several related questions:
A) Should I wish to re-extract the RAW files from the smart object layers with the edits that have been applied, is there a method of PerLayerMetdata that can be used to extract a complete .xmp sidecar that will be recognized by ACR and associated with the exported RAW?
B) Should I wish to change the sequential-naming of the parent TIFF files, is there any method to correspondingly change the filenames of the embedded RAWs directly within the smart object layer? In other words, using PerLayerMetdata, can the filenames of the RAWs be changed without exporting the RAWs using a different filename and then replacing the contents of the smart object layer?
C) I would ultimately like to be able to save the embedded RAWs as DNGs with their ACR edits applied, if necessaray. Given a way to accomplish A), above, it would be a fairly simple to export the RAWs and associated .xmp files and then run the DNG converter on the lot. However, does anyone know of a way to save a DNG directly from the smart object layer?
Any ideas or pointers to existing documentation are much appreciated.

Thank you kindly, Michael. I see now that the example I was viewing had done exactly what you describe, writing ACR settings into the SO layer's metadata at the time of embedding. I was only looking at the portion which later accessed those settings using PerLayerMetadata, and I had mistakenly assumed that CS5 was automatically embedding xmp data in this manner, now, when opening or placing a RAW file as a SO.
I don't see a direct way to get at the ACR settings of a camera raw file embedded in a smart object.
This is sort of what I was afraid of. They're in there, somewhere, but I'm having no luck figuring out how to access them.
If the ACR settings for a RAW smart object are, indeed, not exposed to automation in some manner, I think I must change my workflow such that either: A) No edits are performed in ACR after object embedding; or B) the RAWs are converted to DNGs prior to smart-object embedding so that the ACR settings can be exposed in the exported file.

Will editing a smart object affect my photo in Lightroom too?

So I am used to Lightroom after 6 months and I started to use Photoshop CC.
1) After editing in Lightroom I edit my photo as Smart Object in Photoshop CC.
2) When I'm finished and save this as a .PSD, will this affect the photo in Lightroom too?
Will my photo in Lightroom be affected by using Camera RAW?
Will my photo in Lightroom be affected by using adjustment layers and filters?
For now I know that Smart Object are non-destructive, but I just don't know if they change the edit I made in Lightroom.

If you open the image as a Smart Object from Lightroom, the image will be sent to Photoshop as a Tiff file. If you double click that layer it will open in Camera Raw, but all the settings will be their defaults because as far as Camera Raw is concerned, this is a brand new image. None of the changes made will affect the RAW changes you made in Lightroom since you are now effectively working on a copy of the original image.
It's a bit more complicated if you open the image from Bridge. Bridge sends the original RAW file to Photoshop when you ask Camera Raw. If you double click the smart object, all the Camera Raw settings will be set just as they were when you opened it from bridge. At this point, any changes you make WILL be reflected in the original RAW file right up until you save the file in Photoshop. Once Photoshop has saved the image, changes made to the Smart Object will no longer show up in the RAW file if you re-open it in Bridge or Lightroom.
Once you have saved a file in Photoshop opened from Bridge, it works the same as Lightroom with one important exception. Opening from Bridge retains all the settings you made, so you can undo them (without affecting the original image). If you open the image from Lightroom, you can no longer undo the settings made in Lightroom from within Photoshop without starting all over. So for example, if you set the image to +10 exposure, open it from Lightroom and then open the Smart Object, ACR will show the exposure as 0. You could make it -10 to compensate, but you will lose information in the photo. From Bridge, if you open the Smart Object, ACR will show the exposure as +10 so you can undo it with no loss of information.

CC 2014: are creation and editing of smart objects multiple cores cpu operations?

anyone knows it for sure?
thanks everyone
sam

Chris Cox wrote:
Creating and updating smart objects are mostly just saving and loading files - which is a pretty serial operation.
If you have a transform or filter applied to the smart object, then those steps will be accelerated as the transform or filter normally would be.
Chris that is interesting. We were talking about Smart Objects reducing image size in RAM, and from what you are saying, creating a Smart Object saves it's details to hard drive. Judging by the resulting image size as stated in the Status Bar, the Smart Object uses similar memory to an equivalent raster layer. How does it work if the containing document has not yet been saved as a PSD? I imagine that saving the PSD file must contain the Smart Object information?

Mac locks up when trying to resize a smart object

I'm building a poster with many layers using CS4 and an iMac and I keep running into 1 major problem.
I want to resize one of the layers, so I converted it into a smart object and then hit commant-t to be able to resize it. At this point my computer locks up. I get the spinning wheel and lose all control of my computer.
Can't figure out what the problem is, and the I have to shutdown the computer to regain control.
Any advice?

As with all unexplainable Photoshop-problems You might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences You’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
System Maintenance (repairing permissions, purging PRAM, running cron-scripts, etc.) might also be beneficial.

Program error when attempting to edit a vector smart object. Help?

I'm running Photoshop CS6 (13.0.1) 64bit on a MacBook Pro running OS X Lion. About 60% of the time when I try to double click a vector smart object instead of opening it up in Illustrator I get an error that says, "Could not edit original smart object because of program error." This most recent time it was a smart object from vector data I copied and pasted from Illustrator into Photoshop.
Any idea why this is happening and how I can fix it?
Thanks.

Hi there,
I got this problem when I installed Adob master collection Over CS 5.
I had children book story storis which created in Adobe illustrator CS 5 and I created art boards in Adobe photoshop cs 5.
After installting CS 6 i tried to edit the smart objects and it was not opeinging the smart object file in Illustrator.
I did some tests.
1) Right click on smart object layer and click export contents. Save on desktopp or anywhere you want. (I saved on desktop)
2) I had this file on my desktop (Vector Smart Object10.ai) but it didn't show any icon, which program should open this type of file.
3) Double click on the file and it pop up a extension window 'Click on change and select adobe illustrator' and press OK.
4) Go back to your photoshop file and right click on smart object layer and click dit content. now this time it opens up assets in illustrator.
ENJOY!
www.4d-studios.co.uk

After latest Photoshop CC update, I can no longer edit a raw file in Lightroom 4 as a smart object

I updated PS this morning, since then I am no longer able to edit a file in LIghtroom 4 as a smart object in Photoshop CC. Photoshop will open, but after some time passes, Lightroom 4 gives an error that Photoshop cannot be launched. If I choose "edit in photoshop" from lightroom, instead of "edit as smart object", the file opens fine.
Thanks for your time!
Windows 7 Pro
Photoshop CC
Lightroom 4.4

I updated PS this morning, since then I am no longer able to edit a file in LIghtroom 4 as a smart object in Photoshop CC. Photoshop will open, but after some time passes, Lightroom 4 gives an error that Photoshop cannot be launched. If I choose "edit in photoshop" from lightroom, instead of "edit as smart object", the file opens fine.
Thanks for your time!
Windows 7 Pro
Photoshop CC
Lightroom 4.4

Edits to a JPG Smart Object in a layered TIFF file: DOES NOT Save to the originally placed file?

When placing a JPG as a Smart Object (and even multiples) into a layered TIFF file: If I open each layered Smart Object JPG, make changes as a JPG and SAVE the file, I expect the ORIGINAL SOURCE JPG file that was placed to also be saved- I thought that is the file I was editing!
This SUCKS! To capture my edits to the original individual files: I now have to open each layed TIF file, Edit each smart object JPG and SAVE AS to overwrite the original and capture my changes? Is this the way its always been- I don't think it has. How can I edit a Smart Object file in a layered document and ALSO update the SOURCE file?

You should edit the original jpg, and then replace the smart object. There is a utility that makes this easier, if you do many of these. Looks liek this
link_update.zip

Photoshop bug: Smart Objects overwriting other Smart Objects when edited and saved in Illustrator

Experiencing issues when working with a large number (over 200) vector smart objects brought into Photoshop CS4 from Illustrator.
Things seemed to be going along nicely; if I needed to edit a Smart Object, I could double-click it, it would open in Illustrator and then I could edit and save it. Return to Photoshop and the Smart Object is updated. Swell and dandy. The issue started happen when I hit a large quantity of either vector smart objects (remember, over 200) or the many layers and groups within Photoshop (must be over 500). When I would double-click, open, edit, and save the vector Smart Object, the Photoshop Smart Object I was working on would update AND another/several other Smart Objects would update as well. Which, of course, would ruin the artwork, as suddenly I was seeing several instances of the same object. If it hadn't have been for ForeverSave, I many not have recovered the work.
It's rather hard to isolate the issue to see what's causing the problem. Here are some of the possible causes:
Running Snow Leopard on Mac
Many, many Smart Objects in file, perhaps enough to ruin the naming convention and cause bugs when Photoshop referenced the temp file
Many, many Photoshop layers and groups
Illustrator vector files copy+pasted from several different files (affects the naming convention perhaps?)
Some groups/layers in Photoshop are duplicates
To help make it a little clearer, you should know:
Running the most updated software / OS (that is until CS5 comes out)
Smart Objects showed no error until I had actually opened, edited, and saved the referenced temp file (i.e. VectorSmartObject1.ai)
Files saved and worked on from Dropbox (network folder)
Not looking for much of an answer to this question; I just wanted to see if anyone else had come across this bug. Also, Adobe PLEASE look into this as you begin testing for the next update. I have the file(s) if you need to replicate the issue. My best guess is that the naming convention of Vector Smart Objects has an odd character limit so when Vector Smart Object 200.ai is saved, Vector Smart Object 2.ai gets overwritten.

Have you tested this with Photoshop CS5 and Illustrator CS5? (the current versions, that came out last month)
If you duplicated a smart object layer, both layers refer back to the same file content. So when you change the file, both layers would be updated. That is intentional and explained in your manual. If you didn't realize this, that could explain what you are seeing.
If you placed separate files, then they should not be updated at the same time, because they will refer to separate files.
Yes, Smart Objects only update when you save the file.
You would need over 4 billion smart objects in one document to get Photoshop confused about which one refers to which file. And since the layer limit is much less than 4 billion, I doubt that is the cause.
There is no naming convention involved. We don't limit the filenames (except to platform standards and to include a file type extension).

I'm trying to edit a smart object...

Similar Messages

Maybe you are looking for