I'm trying to export an iMovie and I keep getting to share quit imovie and reliance

I 'm having a problem trying to export an imovie to my desk top
every time I try I get a message sharing requires more memory
to be availble quit and relaunch it

Did you figure this out because i have the same issuse?

Similar Messages

  • Im trying to restore my iphone 4 and i keep getting the error messase 3014 and now all my phone has on it is the connected to itunes picture please HELP

    im trying to restore my iphone but i keep getting the error 3014 and im at a loss at what to do

    1. Connect your iPhone to the computer and start iTunes.
    2. Turn off your iPhone by holding down the Sleep button and slide to power off.
    3. Press and hold down the Sleep button and Home button simultaneously.
    4. After 10 seconds release the Sleep button but continue to hold the Home button down.
    5. iTunes will pop up a window that says it has "detected an iPhone in recovery mode."
    Your device is now in DFU mode and can be restored using iTunes. The iPhone screen will remain black until iTunes restores the iPhone.

  • I'm trying to purchase a book through iBooks and I keep getting the same message over and over, " your purchase could not be completed"

    it tells me to go to iTunes support.com, I tried going to iTunes support and wasn't getting anywhere. I've tried deleting the app and downloading it again, tried different apple accounts, different payment types and nothing is working.

    If you are getting a message to contact iTunes support then you can do so via this link and ask them for help (on these forums we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • My iPhone 5 won't restore, and I keep getting the error messages "9" and "1600."

    So, today has been a disaster for my poor little iPhone. I have been at football camp all day, and my phone has been tucked away in my bag, so no physical damage was done to it whatsoever. At about 3:30, I checked it and it was working fine. At 4, when my camp ended, my phone was dead - with 80%+ battery. It wouldn't display anything, not an Apple logo, not a charge logo, nothing. So, I tried restarting it by pressing the home button and sleep button together for 20 seconds, and it didn't work. I tried doing it for 60 seconds, and it didn't work. So, finally, I get home and plug my phone into my wall charger in hopes of reviving my iPhone, and still no luck. So I've reached my last resort and I plugged it into the computer to restore it. I finally got it to show up, and didn't think there would be any problems. I started getting it restored, and no luck. I got error message 9. I thought it was just unlucky, so I tried again. This time, the process had went a little further, enough to display an Apple logo on my screen, but then I got error message 1600. Ever since then, I've been getting those error messages. I've tried everything. I've rebooted my Mac, changed USB ports, everything. Does anybody know what it might be? I know what both errors mean, and the problems that they are depicting aren't actually happening. Any help would be greatly appreciated.
    Cheers,
    Cole

    Hi Cole,
    I did some checking around and this article has some information on your error messages:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 9 says:
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Error 1600 says:
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    The steps for 1604 are:
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    If all else fails, this article should allow you to fully restore the phone:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    I hope this helps!
    - Ari

  • I have a first generation iPad and I keep getting kicked out of iTunes and iBooks

    How do I solve this
    Robles?

    joe3284 wrote:
    IM satisfied with the screen size. I am just wondering if an upgrade is worth it
    That is a question only you can answer. I concur with Phil, though. By the iPad Air 2. You obviously keep your devices a long time. So, buy what is currently the newest to insure you can keep using it. The iPad Air (great device) will stop being supported before the iPad Air 2. I have an iPad Air and will not be updating to the Air 2 as the difference isn't worth it to me.

  • I am trying to export a project in iMovie and I keep getting a error message about code revision

    I am trying to export a project in iMovie and I keep getting a error message about code revision. i need help!!!

    Hi there!
    Are you certain that the serial number is for InDesign? And the correct version?
    Please feel free to PM me if you wish to verify the serial number.
    Thanks,
    Amy

  • I am trying to send an iMovie project to iDVD and I keep getting the following error msg.  "Unable to prepare subject for publishing:  The project could not be prepared for publishing because an error occurred. (-43)"

    I am trying to send an iMovie project to iDVD and I keep getting the following error msg.  "Unable to prepare subject for publishing:  The project could not be prepared for publishing because an error occurred. (-43)"

    Check out this thread: https://discussions.apple.com/thread/1421870
    It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

  • What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

    What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

    Can you give more details?   What exactly is the entire error message text?  there should be an error number too.   Are you trying to finalize this to an external disk?

  • I'm trying to export a slideshow and I keep getting this message: The movie contains an invalid data reference. What should I do?

    I'm trying to export a slideshow and I keep getting this message: The movie contains an invalid data reference. What should I do?

    That usually means that iPhoto can't find a clip or a shot that you're using in the Slideshow.
    Regards
    TD

  • Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
    Regards,
    Nathaniel
    [removed by moderator]

  • I am using iphoto 6.06 for my intel imac.  I have been trying to print pictures from iphoto and i keep getting a message that states " the picture you are trying to print is in the iphoto library"  what can i do to be able to print a photo from iphoto

    I am using iphoto 6.06 for my intel imac.  I have been trying to print pictures from iphoto and i keep getting a message that states " unreadable file: the following file could not be imported.  the file is in the iphoto library folder"  also when i try to print a picture from iphoto i get a message that says "no page was selected"
    not sure what happened but i can pnly print when i drop the photo onto my desktop as an 8.5 x 11 size picture and i am trying to print 4x6's

    Since the new library gives you the same message log into another user account on your Mac and see if you can run iPhoto without getting that message.  If you get that message there also a reinstall of iPhoto seems indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder,
    Click to view full size
    Then install iPhoto from the disk it came on originally and apply all available updates to it.

  • I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    BUMP
    Yes, I just get that message. I don't see how I could investigate this problem.
    I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
    In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
    Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
    Can anybody help me?

  • HT1222 I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed.  Your systems has not been modified."  I NEED HELP, PLEASE!

    I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed.  Your systems has not been modified."  I NEED HELP, PLEASE!

    I got it figured out myself... yaaaaay for me!

  • I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this windows package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."

    I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I accidentally removed the Bonjour service from my system a few weeks ago, but my iTunes continued to work. Now I have no iTunes and I don't know how to fix it. SOMEONE PLEASE HELP!!!!

    a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
    also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
    (i'm not on windows, so i can't test...)
    good luck!
    j.
    Correct Answer by Peter Lepere  on Oct 14, 2011 3:07 AM
    Hi Rick,
    by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
    Success,
    Peter

  • My ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help

    my ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help

    http://support.apple.com/kb/HT1808

Maybe you are looking for