I'm trying to find a support group for Pages and Numbers.

Thought my post was clear.  I've gone to applications.  All I seem to find are questions re Appleworks (boy, do I miss Appleworks!). 
What I need help with is the oh so wonderful, easy to use, Pages. 

Click on https://discussions.apple.com/. Scroll down to the iWork box and click on it. The forums devoted to the iWork apps will be displayed below.

Similar Messages

  • I am trying to find a power supply for the sony DRX-720 DVD/CD AND THE PRICE

    I am trying to find a power adapter for the sony DRX-720UL DVD/CD Rewritable Drive and the cost?

    All product support for CD/DVD drive, tape backup, or magneto-optical drive peripherals, including repair status, is available from Storage by Sony.
    NOTE: Contact and other information can be found on the Storage by Sony Web site at http://www.storagebysony.com/
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/Win-4K

  • Trying to find a Hard case for my MB466LL/A Macbook anyone know where I would find one. Also is this the only model number for this Macbook? Is there another Model number that the case would fit?

    PLEASE HELP!!
    Trying to find a hard case for my Macbook (MB466LL/A). I cant find anything on the Web? Is there another model number that would fit mine? Any help would be great.

    These are the specs for your computer:
    http://support.apple.com/kb/sp500
    Amazon has a number of products listed. The key is to specify a 13 inch Macbook, not the model number,

  • HT1459 I've been trying to find a belt clip for the ipod nano 7th. generation player, any suggestions!!

    I've been trying to find a belt clip for the ipod nano 7th generation player, any suggestions?? thank you for your time. bill

    Just resolved the problem. If anyone else is having the same issue you can download the latest Epson software which works fine on Lion:
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=29081&prodoid=37368 464&infoType=Downloads&platform=Macintosh
    Sorry for bothering the community was in a rush.

  • I can´t find windows support files for boot camp

    I can´t find windows support files for boot camp

    Boot Camp Assistant
    If you can't download, go to Network control panel and check your settings there, look to see if there is more than one interface listed. And turn off "Auto-proxy setting" and see if that helps, it does in half the cases.
    The only thing really needed would be a small Apple Software Update for Windows program to pull the drivers down while running Windows. Just that one program, which could update itself as happen with 2.0 and 2.1 version.
    As it is, downloads can take 8 hrs for a tiny 620MB package. Strange. True. Been like this.

  • I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable on that is 2TB or a third party software that is compatable with the need I describe?

    I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable one that is 2TB or a third party software that is compatable with the need I describe?

    How much of a hurry are you in, and are you considering upgrading to Lion?
    File Vault on Snow Leopard only encrypts home folders you select, and doesn't work well with Time Machine.
    But Lion will have "full disk encryption" of local or external disks.  See File Vault 2 here: http://www.apple.com/macosx/whats-new/features.html

  • Find out Account Group for already created customer

    Hi,
    How do i find out Account Group for already created customer?
    Is there any Tcode to find that?
    Thanks in advance.
    Swetha

    Hii
    Please check it in XD03 got to sales area tab under billing document tab u will find the account assignment group.

  • I can't find any support package for Solution Manager 4.0

    I can't find any support package for solution manager at
    Support Packages and Patches - > SAP Technology Components
    SAP Technology Components
    GATEWAY
    JAVA LOG VIEWER
    SAPCAR
    SAP EXCHANGE CONNECTOR
    SAP CR CONTENT
    SAPROUTER
    SAPSECULIB
    SAPSSOEXT
    I'm searching it at a wrong place?

    You´re at the right place - but your user doesn´t seem to have permissions to download them.
    You have a license for Solution Manager?
    Markus

  • I have been trying to find Star Wars: Battle for Hoth. Any suggestions?

    I have been trying to find "Star Wars: Battle for Hoth" in both iTunes and in Apps. Any suggestions on where to find it? Is it even still available?

    First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
    Try the update again
    Settings > General > Software Update
    The update servers have been very busy so keep trying.

  • Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

    I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

    Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

  • How do I define 2 disk groups for ocr and voting disks at the oracle grid infrastructure installation window

    Hello,
    It may sound too easy to someone but I need to ask it anyway.
    I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
    The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
    I believe that you will understand the manner and help me on choosing proper way.
    Thank you.

    Hi,
    You have 2 Storage H/W.
    You will need to configure a Quorum ASMDisk to store a Voting Disk.
    Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
    You must have the odd number of voting disk (i.e 1,3 or 5)  one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
    (e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
    If fail the storage that hold the major number of  Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
    It will happen:
    https://forums.oracle.com/message/9681811#9681811
    You must configure your Clusterware same as RAC extended
    Check this link:
    http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
    Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl…

  • HT2105 I am trying to set up an allowance for someone and it isn't allowing me to do so.

    I am trying to set up an allowance for someone and it isn't allowing me to do so.

    Might be help on this thread for you  >  itunes keeps saying it cant verify my...: Apple Support Communities

  • Selection groups for tables and header tables

    A couple of questions or rather observations around Selection Groups for tables and conversion objectu2026
    1) For tables that do not really have a date field, for instance table PDSNR, it appears that you cannot specify a selection group. Consequently, you have to transfer the table in its entirety. Is this something that can be modified via customizing?
    2) And what about the header tables, for example, X_ANLC, I have tried but not able to change the selection groups on these objects.
    Thanks!
    Harmeet

    Hi Harmeet.
    Since you mention you can only filter by date I am assuming you are using TDTIM.
    How would you want to filter PDSNR, for example? Would it want to filter all entries >= a given sequence number?
    The only way I know to do that is to work directly with the configuration tables. In your case you will need to use CNVMBTSEL* tables. Check how the standard selection groups are configured, and it should not be too difficult to follow the same logic and create your own selection groups.
    CNVMBTSELGRP                   MBT PCL Selection groups              (main table to create the selection group)
    CNVMBTSELMEMTYPE               MBT PCL Selection group member types  (main table to define members => fields for the selection group)
    CNVMBTSELGRPDEF                MBT PCL Selection group definition    (definition of the fields in that selection group)
    CNVMBTSELGRPVAL                MBT PCL Selection group values        (values for each field; you can use GE for >=)
    CNVMBTSELCLAUSE                MBT PCL Selection group clause        (should also be straightforward if you are using only one field)
    CNVMBTSELVAR                   MBT PCL Selection group variants     (configure the same variant for your selection group as for the others)
    CNVMBTSELREF                   MBT PCL Selection group reference     (assignment of selection group to conversion object)
    Hope this helps,
    Rui Dantas

  • WRT320N - Does it support DCHP for PPTP and for L2PT?

    Hello, I bought this router, and faced with the problem - how to establish internet connection. My ISP supports only DHCP for PPTP and L2TP, it gave me URL (vpn.corbina.net and tp.corbina.net). I found one topic in local forum with an explanation how to establish internet connection with the same ISP, but for wrt610n. The basic setup page is the same for these two routers, but my router does not work, neither with L2TP nor PPTP settings. It cannot connect to these two servers, and thats all. With 'ping' I found IPs of these servers.
    Currently, I use asus wl520gc, and it supports dchp for vpn, and have no problems with it.
    Maybe you have some ideas how to resolve this problem.
    Solved!
    Go to Solution.

     When I'd like to use pptp connection. I set "Obtain an IP address automatically", put "pptp server ip address" - 85.21.0.21. I detected this ip with ping, also i spoke with ISP support and they told me that this serve has dchp and it doesn't have static ip.
    Than I put user name and password, and press save. Than router saves the settings, I look the status page and see current status as disconnected. I press connect button and router tries to connect, I can see how it gets ip address, gateway ip, dns ips, than there is a sign - connecting, later on, appears small window - impossible to connect to server. And the current status is disconnected.
    Firmware Version: v1.0.03 build 010 Jul 24, 2009 Firmware Verification: b719582d5f3e57c1f7932a15d20ff509 
    Current Time:
    Internet MAC Address: 00:1F:F3:51:4A:9C Host Name:   Domain Name: corbina.net
    Internet Connection Connection Type: PPTP Login Status: Disconnected   Internet IP Address: 10.171.59.49 Subnet Mask: 255.255.248.0 Default Gateway: 10.171.56.1 PPTP Server IP Address:85.21.0.17 DNS1: 213.234.192.8 DNS2: 85.21.192.3 DNS3: MTU: 1460 
    Error - Can not connect to PPTP server 
    The same is with l2tp.  
    Connection Type: L2TP Login Status: Disconnected   Internet IP Address: 10.171.59.49 Subnet Mask: 255.255.248.0 Default Gateway: 10.171.56.1 DNS1: DNS2: DNS3: MTU: 1460 
    The same error. 

  • Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing! Help

    Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing. No green light. Computer turn on. Now what??? Help!

    QUOTE: "No green light. Computer turn on."
    What? so were you able to turn on the computer with the new plug? does it give you any other light? amber/orange light?

Maybe you are looking for

  • Null keys not supported

    Hi. I have created a simple Entity Bean called User with just 2 fields and no business methods. I am using Personal Oracle8 database and sun's JdbcOdbcDriver. The connection pool is configured properly. When I try to deploy this bean, I get an error

  • Stacking layers top-to-tail to create a long banner print of software code in Photoshop

    I have lots of software code (in tSQL, html, JavaScript, XAML, and C#) that I need to print in a long scroll. The scroll will be no more than 440mm wide and as long as it needs to be (though the roll of paper is 45 m long so I’ll need to make sure it

  • My iTunes library data file has been renamed temp file.tmp

    Can I just rename it iTunes Library? It is a functioning iTunes Database file and it works perfectly well - it is just weird! I have iTunes 7.6.2 (9). My library resides on my external hard drive. In my iTunes folder on that drive, I also find Temp f

  • Adobe acrobat reader for bill pay

    I installed adobe acrobat reader on my IPad because I needed to get into my bill pay in my credit union acct and I still can't get it work

  • WAD - Switching the tabs

    Hi all , I am doing the Dashboard for the mangement reports by  using the Web Template web item . i have written the java script to switch the tabs and with that the templates associated with the tab , but when i select the 1st tab it looks ok but wh