I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

cr is installed by updating your app.  use help>update, or update manually
pre cc updates:  http://www.adobe.com/downloads/updates/
cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

Similar Messages

  • I have downloaded Word in icloud have opened a project named Recipes and added a recipe now I don't know how to write and save another recipe to the same place.  I don't see anyway to save?

    After using the Word in ICloud and creating a new project named recipes then putting a recipe in now I don't know how to add a new page with another recipe and save it to the same  project the first one is in.  I don't see any icon that will save?

    Arlene83 wrote:
    After using the Word in ICloud
    There is no version of the Microsoft Word app available for iPad.  What exactly do you mean here?  What app are you talking about?  And what is the tie-in to iCloud?

  • I'm trying to find the dcim file so i can drag and drop my photos onto my pc. However, all i can see this time is a "photostream" folder that is empty as i don't wish to use any icloud functionality. please could somebody help me locate the dcim? thx

    im using iphone 4s and windows vista. thanks.
    also when i plug my phone in i no longer get asked if i want to explore files. how do i enable that? thanks

    Hello iMuppet2, 
    Thanks for visiting Apple Support Communities. 
    It appears that your PC is not recognizing your iPhone 4s as a camera when you connect it. 
    You may find the troubleshooting steps in the "Windows Vista, Windows 7, and Windows 8" section of this article helpful with getting your PC to recognize the iPhone:
    iOS: Unable to import photos to computer - Apple Support
    Sincerely,
    Jeremy 

  • I am looking at a web page with highlighted words that are links that open new windows. I don't even click on them and they upen as I pass over them accidentily with the cursor. extremely annoying!what is it called and how can I remove this 'feature'

    it is usually one highlighted word that when touched, opens up a small window of related companies or info or websites that I might be interested in. one word "presenter" was highlighted, touched it with my cursor, and I think caught a damaging virus.

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
    Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.

  • Don't understand how to download and install trial Elements10.

    I have a MacBook pro which I am new at.  Went to download the trial version of Elements10.  I got a dialogue box with 2 choices: DiskImageMounter (default) or Save.  Which do I use?  What is DiskImageMounter?  Aren't there detailed instructions for those of us who are neophytes?  Can someone help?

    Save it. Find it and double click it to mount the .dmg. Double click Photoshop Elements. Double click Install.

  • Have a new computer and will I my adobe photoshop elements 12 downloading and installing, do you have the setup for me.

    I have a new computer and will I my adobe photoshop elements 12 downloading and installing, do you have the setup for me
    I see only photoshop elements 13
    Thanks

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • In a hurry, I opened an email that said "order was shipped from "ammazon". I downloaded the order document and it ended up being a zip file. I then realized what it was, and did not actually open the file. This was on my Iphone 5. What should I do now!?

    In a hurry, I opened an email that said "order was shipped from "ammazon". I downloaded the order document and it ended up being a zip file. I then realized what it was, and did not actually open the file. This was on my Iphone 5. What should I do now!?

    Delete the email. The zip file will have no effect on your iPhone.

  • I have bought a new imac late 2012 and I want to wipe clean my 2008 mac and install Mountain Lion on the old computer for my kids to have

    I have bought a new imac late 2012 and I want to wipe clean my 2008 mac and install Mountain Lion on the old computer for my kids to have.
    What do I need to do?

    Boot your Mac from the System Install DVD that came with it, and erase the HD using Disk Utility. Then, reinstall the OS from the disc. Give the disc to your kids since it must always accompany the Mac it came with.
    After the OS installation is complete and the Mac restarts to begin its new owner setup procedure, just shut down the Mac. Your kids can take it from there.
    If you purchased Lion or Mountain Lion from the App Store, you cannot transfer it. The Apple ID you used to purchase it is required to maintain and / or reinstall the OS. Unless you want to supply your own Apple ID to your children for their use, they must purchase their own copy of Mountain Lion using their own Apple ID.
    If they do not already have an Apple ID and you want them to have Mountain Lion, you will need to create one on their behalf. This does not change the above procedure - just give them the Apple ID and password you create in addition to the Mac and its discs.

  • For my new Airport TC I have an error this version of AirPort Utility doesn't support this AirPort wireless device. How do I find and download the latest version of AirPort Utility?

    For my new Airport TC I have an error this version of AirPort Utility doesn't support this AirPort wireless device. How do I find and download the latest version of AirPort Utility?

    https://itunes.apple.com/us/app/airport-utility/id427276530
    AirPort Utility for iOS requires iOS 5 or later.
    AirPort Utility 6 requires OS X 10.7.5 or later.

  • How to get and install the new MSI Bluetooth Software Package 1.4.3.3.

    How to get and install the new MSI Bluetooth Software Package 1.4.3.3.
    This little FAQ will only cover the new version of MSI Bluetooth Software Package.
    First thing too do is unistall any older version of the MSI Bluetooth Software.
    Do this through the Add/Remove program applet in your control panel.
    There seams too be only through Live update you could get the new version of MSI Bluetooth Software Package.
    If you can't see any enter for MSI Bluetooth Software in the Live driver section of Live update then you have too enter the following too your registry.
    Create following code in Notepad and save it as MSILD.reg, then run the file.
    ;-->Code start
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\MSI\Drivers\MSI Bluetooth Software]
    "DrvSetup"="1"
    "Version"="1.4.2.10"
    ;-->Code end
    Rerun the Live update and hopefully you will now see a entry for MSI Bluetooth Software in Live driver section.
    Install the new version of MSI Bluetooth Software and reboot your computer. Even if the setup program doesnt told you too doit.
    After rebooting the computer you will see the Bluetooth icon in the taskbar. If it's Red then try too start the Bluetooth services by right click on the try icon and the only alternetiv there is.
    If the Bluetooth services is asking for a valid licens.dat then you should do the following.
    Surf to Jon's Bluetooth guide http://www.jonsguides.com./bluetooth/prepare.html and download the patcher from the link there.
    Unzip the the patcher and then run the BTWPatcher.exe program.
    Now the Bluetooth services will start and you will bee able too configure your own settings for the Bluetooth services.
    If nothing of this work you could try the complete Bluetooth solution at Jon's gudie and install the IBM version of the same program. I havent test this solution and will not do soo.

    I have the MS-6968 device and i want to use driver 1.4.x or 3.0.x. I found the driver 1.4.2.10 but i cannot find any WIDCOMMSecurity code.
    So, can anyone give me a link for BTWPatcher.exe???
    It cannot be found here (Jon's Bluetooth ) anymore.
    Thanks

  • Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!

    Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!
    Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist.   Verify that you have access to that directory.

    Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist.   Verify that you have access to that directory.
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    Vista instructions in the following document: Check your hard disk for errors
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Does "Archive and Install" really exists on the Snow Leopard install DVD  ?

    Well, Mr Magoo really needs your help.
    I have an iMac late 2009 edition and the Snow Leopard DVD installer discs.
    Reading the little baby paper book manual that came with the discs and the iMac it says on page 54 that i can re-install Snow Leopard by choosing "Archive and Install" or "Erase and Install".
    Mr Magoo just can't find that "Archive and Install" choice and have concluded that this is a very bad reprint of a manual from years long ago when it was possible to archive and install or it some joke by Apple.
    Unfortunately my 90 days of phone talk to Apple has expired albeit the two year warranty under apple sometimes care program i purchased is still valid.
    Help/suggestions on how i can get to do an Archive and Install with the Snow Leopard installer DVD that came with this iMac ?

    Dave Sawyer wrote:
    You misunderstand what Carolyn wrote. In Snow Leopard, Apple engineered the installer so that any reinstallation over an existing copy is in essence an "archival" install in the sense that it replaces all the OS files while automatically preserving the applications and user settings, just as the old "archive and install" option did, though no longer with the option to not preserve the user settings. So all installations over an existing OS are in essence "archive and install", so Apple removed the extra, now-redundant option.
    They also removed the "Erase and Install" option. The only way you get a "complete fresh" installation is if you use Disk Utility to erase the drive. Otherwise the 10.6 installer will install a new set of OS files but not remove your apps and user settings.
    If you want to reinstall Mac OS X 10.6 and keep your applications and user settings and data, just do a normal installation over the existing one. If you want to do a completely fresh installation, either starting completely new or restoring user data from a backup, first run Disk Utility from the Utilities menu and erase the drive.
    Well, have you tried an Snow Leopard installation on top of a previously installed Snow Leopard.
    I must really be an idiot in using the snow leopard installer.
    I loaded the optical slot with the Snow Leopard DVD installer and after it opened up on the desk top i double clicked the install icon. That restarted my iMac.
    When I launched the installer after selecting my "Language" and then going thru the customization ( for example I don't need all those foreign languages ) and then selecting the drive to carry out the installation the installation starts.
    Upon completion all my third party applications were zapped and i only had the Apple applications. There was no "previous" system folder as there used to be in previous operating system installers.
    So, honestly, I have no idea how you folks manage to make an Snow Leopard installation over a previously installed Snow Leopard whereby all the third party applications are still there.
    Please tell me the steps i should take to make an "archival" install over top of a previously installed Snow Leopard that retains all third party applications.
    After my install of Snow Leopard I had to re-install all my third party software applications which in my case are mainly midi/audio programs.

  • On my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

    on my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

    Click on the Desktop. From the Finder menu select Preferences. Check the boxes for what you want on your Desktop. If they are already checked, then try unchecking and rechecking.

  • Wipe and install OSX Leopard without the disk

    Hi everyone,
    I need to wipe my iMac and reinstall OS X Leopard. I have the install disks, but my CD drive doesn't work and can't read the disk.
    Is there a way for me to wipe and install OSX Leopard without the disk?
    Thanks.

    You can turn the 2011 iMac into a Firewire Optical drive.
    Put the Leo Install Disc into the 2011 iMac, boot the 2011 iMac while holding t key to put it into FW Target Disk Mode, with a FW cable connect the the 2, boot older one holding Alt key, choose the Leo Install Disc to boot from.

  • I have an old file with an .A4P video from 1999. I don't own any Adobe products (and don't really want to buy any). I just want to be able to convert the file to something that I can actually view. Any help?

    I have an old file with an .A4P video from 1999. I don't own any Adobe products (and don't really want to buy any). I just want to be able to convert the file to something that I can actually view. Any help?
    I was a kid when I made a documentary for a school project. I've been trying to figure out how to retrieve the file. 4 years ago, I was able to get the files off the Iomega Zip drive (finally), but I now see the file is saved as a .A4P. There is also a file saved as a .PKG as well, but I don't know how to open this with my Windows 8 COmputer.

    .a4p is an Authorware v.4 (Windows) project.
    Interesting you have it as a .pkg...usually that's a published-on-a- Mac extension, if I recall.
    At any rate, can you put the file up on a Box, Dropbox, FTP, etc...and send me a URL?
    I should be able to published it so you can view the project (it would be an .exe).
    It can't be converted to anything though - not without manual effort.

Maybe you are looking for