I'm trying to get built-in microphone working on Satellite C850

Dear Forum
I am trying to get the built-in microphone working on my C850.
Nothing is recorded if I use the sound recorder utility.
In the Recording tab the only microphone listed is a Realtek High definition Audio which is set as the default device, is enabled and mute is off.
Should this be an internal microphone?
Any suggestions will be greatly appreciated.

> While researching this I saw screenshots where the microphone was listed as 'Internal Microphone'. In my laptop it is listed as 'Realtek High Definition Audio'. Could my laptop not 'know' that it has a built-in microphone?
Obviously the notebook supports the Realtek HD audio driver.
I would recommend you to download and to install the latest Realtek HD audio driver which you could download directly from the Realtek page: http://www.realtek.com.tw/downloads/

Similar Messages

I have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

i have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

Sounds like you actually have a 1st generation as those cannot update beyond iOS 3.1.3.
Model Identifier Utility
rachelfromnorthumberland wrote:
what apps can i get??
Finding iOS Apps Compatible with Older Devices

I am using an I phone 5 in Germany and trying to get text messaging to work through the hands free Bluetooth connection on a Honda CRV. It keeps telling me that text messaging is not a feature of my phone. messages come in on the phone.How to resolve ?

I am using an I phone 5 in Germany and trying to get text messaging to work through the hands free Bluetooth connection on a Honda CRV. It keeps telling me that text messaging is not a feature of my phone. messages come in on the phone.How to resolve ?

mono 8 bit 8k is 64kbps, yes. 8 bits times 8,000 = 64,000 = 64k bits/sec.
And yes I think that's a typo - there's no such thing as 'Mone' that I've ever heard of...
But you might want to check to find out if this is a mu-law non-linear format, possibly - there are several ways that 8 bit 8k wav files can be encoded, and typically phone systems don't use linear ones. If you have a log-in to Zultys' user-base system they have an FAQ there, I believe - the answer might be in that, and it won't cost $500.

I am trying to get my printer to work.

I am trying to get my printer to work. It is a Canon MP240, it does not show up in the printers menu. Though it is plugged in via USB.

This printer does have a driver available via Software Update, meaning that when you connect the printer to the Mac via USB cable the driver should be downloaded and installed automatically for you. Of course this will not occur if the Mac cannot detect the printer at the end of the cable. So if you open Print & Scan, select to Add and the MP240 is not shown in the Default Add Printer view then there could be a problem with the USB cable or with the printer.
To double-check if the printer can be seen by the Mac, open System Information and under the Hardware entry in the sidebar, select USB. Then in the top right pane you will see all the USB connections on your Mac and what is currently connected to them. If the MP240 is not shown, then try moving the cable to a different USB port on the Mac. And don't use a USB hub or the USB port on the keyboard. If moving doesn't help the printer appear under one of the USB busses, then try a different USB cable. If that still doesn't help, turn off the power to the printer and unplug the power cord for 10 minutes before reconnecting and turning it back on.

My Pro Tools program was damaged by the Creative Cloud system. I was invited to install and try the Cloud,but it did me a great dis-service and has set me back in Production and personal time trying to get my pro Tools working again. I am really disappoin

My Pro Tools program was damaged by the Creative Cloud system.
I was invited to install and try the Cloud,but it did me a great dis-service and has set me back in Production and personal time trying to get my pro Tools working again. I am really disappointed and would like you to advise me how to restore my program to its working state. I am in a traumatic state since I have Artistes life work being processed in the Pro Tools 9 Program. Help! Help! Please.Ps. I tried reinstalling the software from the Disc....Still NOT working.

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Im trying to get my imessage to work on my iphone4

im trying to get my imessege to work on my iphone4,i set up the account and did everything by the book .
the imessege works fine on my macbook but dont seem to work on my iphone .
i allways had this probleme on my iphone but recently i upgraded my ios to ios 7 and it didnt made any diference .
please help....

This may be of use,
http://support.apple.com/kb/HT4527

Cant get Built-in Microphone to aggregate with Built-in line input

HI I have a Early 2006 Imac running Mac os x 10.6.8 and im trying to aggregate my imacs microphone and line in input with audio midi setup but i cant seem to get the microphone to work. The line in works.
I Have both on the same format and channel.
I tried adding out put as well as a clock but doesnt fix the microphone. Reason is I want to be able to play music while on teamspeak with friends.
Thanks

> While researching this I saw screenshots where the microphone was listed as 'Internal Microphone'. In my laptop it is listed as 'Realtek High Definition Audio'. Could my laptop not 'know' that it has a built-in microphone?
Obviously the notebook supports the Realtek HD audio driver.
I would recommend you to download and to install the latest Realtek HD audio driver which you could download directly from the Realtek page: http://www.realtek.com.tw/downloads/

I am trying to get TRON-Legacy to work on itunes......

I have been trying to get the TRON-Legacy soundtrack to work on Itunes and it isn't reading, or doing the internet download that it needs to do to aquire the music and such. I have tried multiple times and have had no success.
Can someone help me?
Thanks!

I'm assuming this is the iPod Touch, since that is the only iPod that accesses the iTunes store. I would recommend you post this here https://discussions.apple.com/community/ipod/ipod_touch

OS Win XP, trying to get phone modem to work

''locking as a duplicate - https://support.mozilla.com/en-US/questions/867405''
Desk top computer with Windows XP OS, I am trying to get the 56K phone modem to work. Any suggestions?

That is extremely vague.
Maybe if you were t provide some information, any information, then someone could help.

Trying to get 'External Sample Editor' working.

Hello,
I cannot find anything in the manual about changing preferences as to what editor you are using. I found the key command and tried to get DP as my external but once I saw that wasn't going to work I couldn't find any possible way to change my choice of editor. There seems to be no preference or menu that would let you pick a new one. Is my only choice to complete trash prefs and rebuild everything? Not a huge ordeal but tedious none the less.
Chris

It's a lot easier than that.
On my system there is an alias :
~/Library/Preferences/Logic/External Sample Editor
You could try removing the file from it's location or going about the 'select new original method.

[SOLVED] trying to get Heros of Newerth working

hello ive just installed Arch Linux and i cant seem to get Heros of Newerth working
ive tried installiing it through the ABS but it fails to launch and with the client from the HON website i get the following error
warning: The VAD has been replaced by a hack pending a complete rewrite
K2 - Fatal Error: Couldn't load vid_gl2
i am using the official nvidia driver with both the 64 bit and 32 bit libs installed. Any help would be appreciated
Last edited by jwenzel2 (2012-10-31 01:55:14)

Do you really think people can magically know what your system is? I mean, what do you even expect. You give 1 bit of info (nvida) and expect people to be able to help you. Are you serious?
Provide at least these: lspci, lshw -C video, lshw -short, glxinfo|grep -i rend, pacman -Qs mesa, pacman -Qs nvidia, pacman -Qi linux, uname -a

Beginner trying to get my beans to work with jsp on tomcat

Please help me open my eyes!
I know this is a stupid oversight on my part, but I've been working for days on getting other things to work on my tomcat server, so I'm out of ideas on this one.
I've followed all the tomcat docs instructions on where to put my jsp and bean files and set my classpath to where my beans are located. jsps work fine for me but when I try to run this jsp that uses my CalcBean, I get this and similar internal server errors:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 1 in the jsp file: /jsp/calc/calculate.jsp
Generated servlet error:
C:\jakarta-tomcat-4.0\work\Standalone\localhost\research\jsp\calc\calculate$jsp.java:56: Class org.apache.jsp.CalcBean not found.
CalcBean calc = null;
^
Do I need to register my bean somewhere like web.xml?
Thanks so much in advance for any help!!

rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww

Trying to get Lightbox 2 to work on my page...

Alright, I have a gallery on my girlfriends page and would
like to incorporate this javascript into it:
http://www.huddletogether.com/projects/lightbox2/
I've followed the instructions but cannot seem to get it to
work. I'd like to paste the code and see if you guys have any
insight. I've only tried it with the first image in the gallery and
for all the others I have an "OnClick" command that I haven't
changed. Here's what I got so far...it's probably a mess:

> BUT...here's the page that
> I'm trying to change:
>
>
http://www.clairedunaway.com/gallery.html
please upload the page You Have Put the scripting into.
(use a new filename so it doesn't overwrite existing page)
upload all dependant files including All the .js files.
Then people can try the real uploaded page to find the
problem.
A possible- you are trying to test it locally and built in
protections from
running scripts in local files keep it from working.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

How to view mjpeg on Iphone?? Trying to get this url to work...

Need some help. I've been reading that I can download an app to view mjpeg camera feed. I've tried a few free apps, and can't get it to work. I'm trying to load this page on the iphone:
http://209.50.173.119:1000/
Username: guest
Pass: guest
I can view this fine in IE, etc. Maybe you can can help me to get this to work on the iphone???
Message Edited by Jason B on 01-25-2010 12:42 PM

What is the Model no of the Camera...?
You can view the video on I-Phone.It can work provided your camera is communicating wirelessly with iphone. You also need applications like adobe flash player to be able to view the images on your iphone.
Try this link.

Trying to get ricochet mechanics to work, need help!

Hey, for a project I'm doing, I'm making a ricochet game with Actionscript 2.0, where the player shoots a bullet and it bounces off objects trying to hit the opponent. It's working decently so far, but my problem is I'm having a VERY hard time getting it to work right. Sometimes when I shoot at a box, the bullet will tunnel through it, bouncing off of invisible walls on its way. I just want the bullet to bounce off of the edge all around, but it is tunneling as I'll show you in a video I uploaded. Here's the code I'm using currently, but it's having this tunneling problem.
if (bullet_fired.hitTest(boxobject)) {
                if (bullet_fired._y<=184 || +bullet_fired._y>=214) {
                    bullet_fired.diry *= -1;
                    bounces += 1;
                }else {
                    bullet_fired.dirx *= -1;
                    bounces += 1;
where 184 is the top of the box and 214 is the bottom.
Am i approaching this completely wrong or what am i doing wrong.
Here's the video I uploaded of me demonstrating my problem. http://www.youtube.com/watch?v=O9dwW4_UcFM
Please help me and give any suggestions you have, I'm pulling my hair out!!

you're repeatedly satisfying both your hittest and your y constraints when the bullet is shot at a shallow angle. ie, the y-property of your bullet does not change enough with the initial hit to prevent a 2nd, 3rd etc hit.
again, to remedy, use:
if (bullet_fired.hitTest(boxobject)) {
                if (bullet_fired._y<=184 || +bullet_fired._y>=214) {
                    bullet_fired.diry *= -1;
bullet_fired._x=previousX; // you need to define previousX and previousY
bullet_fired._y=previousY;
                    bounces += 1;
                }else {
                    bullet_fired.dirx *= -1;
                    bounces += 1;

I'm trying to get built-in microphone working on Satellite C850

Similar Messages

Maybe you are looking for