I'm trying to install i-tunes but i get an error message that reads, an error occurred during the installation of assembly microsoft VC80.CRT type = win32 version = 8.0.50727
Can someone help me install itunes? i keep getting an error message
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)
Similar Messages
-
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.
it says that Windows Resource Protection could not start the repair service.
Okay. We've got a broken Windows Modules Installer on the PC, then.
It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
i am trying to reinstall itunes 10.5 and am getting the following error message.
An error occurred during the installation of assembly “Microsoft.VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b 3b9a1e18e3b”.processorArchitecture=”x86””. Please refer to Help and Support for more information. HRESULT:0X800736B3.
Anyone know how to fix this?same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195”,public key token 1fc8b 3b 9a 1e 18e 3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information:"HResult 0x800736FD
I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f
I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I have this error pop up while almost done installing, "An error occurred during the installation of assemble 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="amd64"". HRESULT: 0x80070422
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
PLEASE HELP!!
same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
Tried to install itunes 10/5 and got this error:
An error occured during the installation of assembly 'Micrsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and Support for more information. HRESULT: 0x80073712
Can anyone help solve this problemExactly the same problems as many others with iTunes 10.5 and my Windows 7 32 bit laptop: An error occurred during the installation of assembly 'Microsoft.VC80.CRT .type="win32", … HRESULT:0x800736FD. I followed the Apple instructions to completely uninstall earlier iTunes and all Apple applications and then tried to re-install iTunes 10.5. Numerous attempts. Still no success. Constantly goes through the install and then rolls back after failure.
By unzipping using WinRAR and installing each module separately it seems that the module that fails is the AppleApplicationSupport.msi
Finally I uninstalled everything again and reinstalled iTunes 10.4.1. This installed perfectly. So at least I still have iTunes.
I was able to install iTunes 10.5 on myWindows XP SP3 desktop.
I noticed with WinRAR that the AppleApplicationSupport.msi file with 10.5 is a completely different size to that with 10.4.1. This suggests to me a conflict between the latest AppleApplicationSupport.msi and Windows 7. -
i cant install iTunes to my Sony laptop i have this message
error occurred during the installation of assembly 'Microsoft .VC8O.CRT.type =win32" .version "8.050727.6195" .public key token="1fc8b9a1e18e3b".processorArchitecture="X86"" . please refer to help and supperror occurred during the installation of assembly
'Microsoft .VC8O.CRT.type =win32" .version "8.050727
.6195" .public key token="1fc8b9a1e18e3b".processo
rArchitecture="X86"" . please refer to help and support for more information . HRESULT:0x80070005 -
Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?) -
itune doesnt install showing error during installation of assembly ''Microsoft.VC80.CRT,type=wim32'',version=''8.0.50727.6195''.publicKeyToken=''1 fc8b3b9a1e18e3b
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
windows 7...
please help; step by step?These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)
Maybe you are looking for
-
IMovie missing, but still able to play it! (iPad)
I can play the complete finalized movie, but can not transfer it or copy it! Got the "missing clip" message! But than where is this movie file coming from? Only present in iMovie!? iTune or Camera roll doesn't show it either! Where is this file locat
-
How can I transfer data form one data store to another iview /dats store
Hello, I have two iview and want to transfer the data from my data store (main iview) to the nested iview (or the data store in nested iview) Can you give me instructions, how I can implement this with the signal in and outports. Thanks Bst regards t
-
Ipod Touch Recognizes WIFI but not password
I have a new 32gb Ipod Touch. At home I am trying to connect to my wifi. It recognizes my network. I try to connect to the network, type in the password, and it says "incorrect wifi password" Although I know it is the correct one, and I tried multipl
-
Unable to clear arp in cisco6500
Hi all, I have a core switch and when i do a "show ip arp" it shows the arp of an ip address 1.1.1.1 I did a clear ip arp 1.1.1.1, however when i do a show ip arp, the arp for 1.1.1.1 is still there even though 1.1.1.1 is not active on the network as
-
Can anyone tell me how to do this in Flash? See the following link?
Can anyone tell me how to do this in Flash? See the following link? See this link. I want to know how to create the painting excercise as made here. http://disney.go.com/disneychannel/playhouse/littleeinsteins/activities/paint.html