I'm trying to install mountain lion from a partitioned disk on my HDD

i have the software and stuff set up on my partitioned part of my hdd.  but when i try to boot into it. i get a grey screen with a stop sign on it. help me if you can please

Given the model, if a MacBook3.1 (13-inch Late 2007) the last system
supported is Mac OS X Lion 10.7.5. You could get it from Mac App Store
after buying it; they'd send you an email with unlock code to get/use it.
And of course the computer has to be running at least Snow Leopard
10.6.8 to access the Mac App Store, App Store, and iTunes store, etc.
With the earlier model MacBooks, usually the better experience is with
Snow Leopard 10.6.8 and older applications that do not require much
additional system resources, yet Late 2007 upgrades to 6GB RAM.
There is more info on a variety of MacBook (2006 to 2010) builds at
everymac.com & you can check the technical specs across the board.
http://www.everymac.com/systems/apple/macbook/index-macbook.html
Two at everymac are said to be Late 2007, while MacTracker shows
only one (with EMC & model# w/ two processor variants) Both vintage.
Sorry, the reason why it won't install:
Mt Lion OS X 10.8 can't be run in it.
Good luck, in any event...

Similar Messages

  • I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store.  It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available.  Please help.

    I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store.  It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available.  Please help.

    Welcome to the Apple Support Communities
    One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
    First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
    We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

  • I'm not crying. Is there a way to install Mountain Lion on a bootable disk on latest iMac cuz mine shipped without an OS?

    I could cry right now. After decades of being an Apple fan, something is happening for the worse and issues with every Apple product I own 2 iphones, 2 iMacs, 15" Macbook Pro, and iPad Mini (no issues here, just slow connecting to App Store and can never seem to download updates)  has left me disenchanted. I do have a question about Mountain Lion but just airing out grievances.
    Ok, to the point. I have the new 27" iMac that was just released. Was delivered and opened the box, turned it on, and there was a flashing folder icon. No OS, wonderful. I live in Brooklyn and not trying to lug a 27" computer onto the train nor should I have to pay for a cab to resolve this. Anyway, I tried to go into Recovery but it started doing an Internet Recovery with a download time of 9 hours. Um, no thanks. So I downloaded the latest version of Mountain Lion from the App store on my old iMac and made a boot disk onto an external via Apples instructions. Plugged it into new iMac lemon, go into recovery mode, see the bootable drive, click on it to reinstall and it gives me a crossed out circle icon and shuts down.
    What am I doing wrong? I have pretty decent broadband and did start the internet recovery process now until I find a better solution online. After 5 hours, Internet recovery finished and clicked on Reinstall Mountain Lion to which it's asking me to download the OS again and with a 13 hour download time!!!! What's going on here? What was the purpose of internet recovery taking 5 hours only to download it again at another 13 hours???
    Question is, is there something I should be doing differently? Is there a way to install Mountain Lion from a bootable disk? This is mind blowingly the dumbest thing I've encountered with Apple. Got a problem with your OS? No problem, just download a 4.4GB file every incident.
    Thank you.

    You can't grab a installer from another Mac and expect it to run. The newer Macs have newer hardware which requires special drivers. If the version that boots the iMac is a special build, it won't work any other way than Internet Recovery.
    If it was me, I'd take it right back. You have no idea if the OS is just corrupted, the hard drive is dead, or what. I wouldn't take my chances with it.

  • While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store

    While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.

    The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
    Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
    If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
    Good luck,
    Clinton

  • Trying to install Mountain Lion, getting Disk not formatted properly

    I am currently running osx 10.6.8, trying to install Mountain Lion and when I am selecting the drive to install too I get:
    "This disk is not formatted as Mac OS Extended (Journaled)..."
    This is my master HD so i cant really just reformat it? Im not great with macs so step-by-step would help.
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,1
      Processor Name:          Intel Core i7
    System Version:          Mac OS X 10.6.8 (10K549)
      Kernel Version:          Darwin 10.8.0

    Open Disk Utility, select your Macintosh HD volume. In the status area at the bottom check that it is partitioned using GUID. Now click on the Journal icon in the toolbar above. This should fix it for you without having to reformat the drive.
    Since you have the downloaded Mountain Lion installer I suggest you make a copy of it in your Downloads folder. Then do the following:
    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
        Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
        Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
        the copy into your Downloads folder. Now you can click on the Install button. You
        must do this because the installer deletes itself automatically when it finishes
        installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
      a. Open Disk Utility in your Utilities folder.
      b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
          side list. Click on the Partition tab in the DU main window.
      c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.     
          Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
          partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
          the process has completed.
      d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
          list. Click on the Erase tab in the DU main window.
      e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
          button for Zero Data and click on OK to return to the Erase window.
      f. Click on the Erase button. The format process can take up to an hour depending upon the flash
         drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
      a. Double-click on the InstallESD.dmg file to mount it on your Desktop.
      b. Open Disk Utility.
      c. Select the USB flash drive from the left side list.
      d. Click on the Restore tab in the DU main window.
      e. Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
      f. Drag the mounted disc icon from the Desktop into the Source entry field.
      g. Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.

  • When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

    When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

    My Mountain Lion install failed for the following reason:
    OS X can't be installed on the disk Macintosh HD, because a recovery system can't be created.
    The message went on:
    Visit www.apple.com/support/no-recovery to learn more.
    The page is about a different failure, but I'm assuming the reason for my failure is this one:
    The disk has a non-standard Boot Camp partition setup, in which further partitioning was performed after running Boot Camp Assistant, or the configuration that Boot Camp Assistant created was manually modified.
    The cure involves erasing the entire HD and starting from scratch, which in my case would involve backing up both the Mac and Windows sides, setting up Boot Camp again, reinstalling Windows XP and recovering everything from backups on both sides. I would rather not have Mountain Lion than go through all that, and I think it's unfair for Apple to expect me to.
    Because I don't recall doing anything off-piste when I set up Boot Camp in the first place (for a start, I'm not clever enough), I consider this episode an inadequacy in the Mountain Lion installer. As I won't be using the download, is it possible to get my money back?

  • Getting S.M.A.R.T. when trying to install Mountain lion. Hard drive works pretty well. I understand that many users have been facing the same issue. Has apple patched it yet?

    I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
    Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
    Thanks
    ST31******ASQ:
      Capacity:          1 TB (1,000,204,886,016 bytes)
      Model:          ST31000528ASQ                          
      Revision:          AP24   
      Serial Number:                      6V***5JR
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Rotational Rate:          7200
      Medium Type:          Rotational
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Failing
    <Edited By Host>

    If you haven't done so, run Disk Utility  /Applications/Utilities
    to run a live verification.
    The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
    Hopefully you have all your important data backed up just in case.

  • Please help me install Mountain Lion from my USB on my ERASED Macintosh HD partition.

    Hi, So my Macbook 7.1 (running macosx 10.6.8) was running really slow due to poor user maintenance. I decided that i should purchase Mountain Lion and install it over the 10.6.8 version. That worked but my computer turned SUPER SLOW. So i decided to completely startover and erase the partition, and install from the USB. Unfortunately for me this is where my skillset ends, and I need help.
    After erasing the Macintosh HD, i created a new GUID partition, and then clicked Restore. I dragged my USB drive under the "source", and dragged my new partition under the "destination". That didnt work so i erasaed the partition again. At this time,  i got an error message saying that i cant erase the partition because its not unmounted.
    So thats where Im at. I guess i need to know how to unmount the drive, then how to erase it, then partition it, and then install Mountain Lion from the bootable USB.
    Appreciate your help!
    Nick

    I did the erase from Disk Utility. At the time I had started the computer by holding down Ctrl+R, so i am not sure which recovery drive it used. I can say however that I do still have the recovery partition.
    Im a bit dense when it comes to Apples. How do i go about re-installing from the recovery? Also, how do i get around the unmouting issue?

  • TS1702 how do i delete from the startup disk? I am trying to get Mountain Lion from the App store and it says that the purchase was not complete because i need 4.06 GB space to download OS x 10.8. and to remove items from my startup disk to increase space

    how do i delete from the startup disk? I am trying to get Mountain Lion from the App store and it says that the purchase was not complete because i need 4.06 GB space to download OS x 10.8. and to remove items from my startup disk to increase space. How?
    Thanks

    You can use iCloud with 10.7.5. You do not need to upgrade to Yosemite. You should provide a minimum of 15 GBs of free space or 10% of the hard drive's capacity, whichever is greater.
    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • Tried to install Mountain Lion and it comes up with the following message  Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

    Tried to install Mountain Lion and it comes up with the following message  Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

    Go to  > Software Update and install updates. Finally, go to App Store, buy Mountain Lion and install. Open > http://www.apple.com/osx/specs/

  • I have tried to install Mountain Lion but it has failed to install properly

    I have tried to install mountain lion but it has failed to install

    If you open Finder and open your Applications folder list, under the alphabetically listed "I"'s you should see an application called "Install OS X Mountain Lion.app", if it downloaded OK.  This is the package that you double click on to begin installation of Mountain Lion.  Have you already done this?
    Hope this helps

  • I erased my HD. Now I can't instal mountain lion from my bootable flash drive, and keep getting "installation error. Try again."

    I bought  mountain lion, made a bootable flash drive.
    I booted from it and it went to upgrading right away!
    So I stopped it and went to my former recovery partition I erased my HD because I wanted a clean start.
    Now I can't instal mountain lion from the bootable flash drive, and keep getting "installation error. Try again."
    and there is no 4 choices window.
    I don't know what to do.

    How did you create the USB install thumb drive? If it was with Disk Utility I have run into this problem and have since used THIS program to make the USB install drive.
    As to your problem you only have one option and that is to Reinstall the Original OS X version that came on your computer or if you still have the Lion Recovery Partition use that to reinstall Lion. Or if you system came with Lion and you have No Lion Recovery HD Partition you can boot the system from over the internet and Reinstall Lion.
    At startup hold down the Command+Option+r keys until you saa a spinning Globe in the center of the screen. Once that loads Repartition the drive as One partition and then reinstall Lion.

  • Why I cannot assess deleted Apple mail messages in time machine after installing mountain lion from snow leopard.

    Ever since I installed Mountain Lion from Snow Leopard, I cannot retrieve my deleted Apple mail messages from Time Machine.  I could do it in the past using Snow Leopard.  The effective date for the the non-retrival of deleted messages is the date I installed Mountain Lion from Snow Leopard.  Any thoughts?

    Keith Montreal wrote:
    It was origionally a local folder for things like receipts from the Apple Store, etc
    I'm still not sure what you mean . . . is it listed in the "On My Mac" section in Mail's sidebar, like these?
    Mountain Lion appears to have given it an icon very much like an Archive box and put the "on My Mac" folder within that "Box" on both the back ups and the new Mail program - in fact it did it 6 times, which was the origional problem.
    Can you post a screenshot?
    I could restore inbox messages although they came in as a new mail box called Time Machine rather than into their origional mailboxes (there are 7 different addresses)
    Yes, that's how Time Machine restores Mail messages, so it doesn't erase the current contents of an existing mailbox.  You can then move them into the desired location.

  • I re-installed Mountain Lion from a USB stick, and now my Apps can't be downloaded.  The App store indicates that the Apps are already installed, but that is not the case. Now what :)

    I re-installed Mountain Lion from scratch of a USB stick, and now my Apps in the App store ca not be installed, the App store indicates that they are already installed, but that is not the case.  Now what?

    Ok, this is somewhat of a better work around I've found:
    Starting in the Australian iTunes store, I go through the process of signing into the UK iTunes store up until the point it asks for my credit card information.
    I then click the 'X' in the top left of iTunes to exit the store.
    Now when I click on my Apps Updates button it shows me what UK Apps I have that are available to update.
    You can't download these as at this point I've changed the store I'm viewing, but haven't officially switched accounts. Not to worry.
    I write down the names of the UK Apps to update.
    Then, use the 'search store' field in the top right of iTunes to search for one of the Apps.
    Once you've found it, click to buy it / download it.
    iTunes recognises that the App is already in your account and downloads it again for free….
    … now I'm HOPING that that App is now fully within my Australian account… unfortunately only time will tell once there is a new update for it.
    I'll let you know.

  • Installing Mountain Lion from Snow Leopard, Install failed and HD write-locked

    I recently downloaded the mountain lion installer from the App Store and I ran the installer. Stupid person as I am, I did not have any backups for my file and I naively assumed that an apple OS installer would be without flaws. Boy, was I wrong. I need every bytes of my data (or close to every bytes) but the installer failed.
    Mid installation, the installer stopped and said that the installation failed and that I need to repair my disk. So I restarted the computer and I ran disk utilities (my start up disk was the OS installer and the installer allows me to run several programs, including terminal, disk utilities, and by the way, when I held option while starting up to see which start up disks I have, I only had the OS installer as the start up disk. Also, the installer allows me to run a program called "Startup Disk" when I click on the apple logo on the top left corner, but it doesn't allow me to startup my computer using Macintosh HD) and noticed that when I highlighted Macintosh HD, my "Repair Disk" button was grayed out. So first things first, I ran the "Verify Disk" button but after a minute or so, Disk Utilities said that verification failed and that Macintosh HD needs to be repaired. But the "repair disk" button is grayed out! So I went to the Mountain Lion installer again and ran it. Of course, it failed again so I restarted the computer.
    So I tried to first back up all files in Macintosh HD to an external hard drive using Disk Utilities, and I used features such as "New Image" and "Restore" but they both ended up in "Input/Output error". I tried many methods with Disk Utilities but they resulted in errors.
    After some research, I noticed that some people's computers worked after they reset their PRAM. So that's what I did. I held command+option+P+R when computer started up and I reset the PRAM. When the start up disk (which is the OS installer, not the normal operating system) loaded, I was greeted with choose languages option and then I was back in the Mountain Lion installer state. I again ran the installer again, hoping something would be different, but then it was different. But not in a good way. When I was told to choose where I would like to install Mountain Lion, I noticed that Macintosh HD was grayed out. Last time, I was at least able to run the installer but this time, Macintosh HD was grayed out. The installer said that my Macintosh HD was locked. After some research, I learned that apparently, the Mountain Lion installer write-locks Macintosh HD mid installation.
    So now I am stuck and I am thinking of two things (plus some questions)
    1. I am wondering if there is a way to unlock Macintosh HD. But even if I can unlock Macintosh HD, there is no guarantee that the installer will successfully install Mountain Lion, am I right?
    a. so how can I un-write-lock Macintosh HD?
    2. More realistically, I am thinking of borrowing someone else's macintosh computer and use it as the backup center. I have a firewire cable and a terrabyte external hard drive. So what I'm thinking is that I'll hook my computer in target mode to my friend's computer and I will also plug in my external hard drive to my friend's computer and then I can download and run Carbon Copy Cloner from my friend's computer to copy all data from my Macintosh HD to my external hard drive. And then I will erase my Macintosh HD, freshly install Mountain Lion onto it and then copy all data back from my external hard drive. But I am not sure about few things.
    a. it looks like my Macintosh HD is write-locked. Can I still use Carbon Copy Cloner to copy all data from Macintosh HD (in target mode) to my external hard drive?
    b. will my computer allow me to erase (or format) Macintosh HD?
    c. will my erased/formatted Macintosh HD able to install + be installed Mountain Lion OS?
    If you are here, then you have read my long long problem. Thank you very much and I would really really really appreciate your answers and opinions. Thanks

    I'm not sure where you read that about the disk being "write-locked." That doesn't make much sense, given that the major task an installer like this must achieve is writing a whole bunch of files to the hard drive. I think your source was mistaken.
    As to what happened, it sounds like your hard drive was badly corrupt to start with, or possibly was on the edge of failing and is now in the process of dying entirely. If you don't have backups of your data, that does not bode well for you, unfortunately. If you can manage to use target mode to copy your data, do that.
    Once you're sure you've got all your data, you need to start up from your Snow Leopard install disk and repair the hard drive. (Since it sounds like the Mountain Lion installer didn't work, I wouldn't trust the recovery partition that Mountain Lion installs.) Or, even better, just erase the hard drive entirely and reinstall Snow Leopard. Then, once you're back up and running, with all your data back on the system and with Snow Leopard updated to the most recent version, try installing Mountain Lion again. If any of that fails again, the problem is likely to be a dying hard drive, and you'll need to replace it.

Maybe you are looking for

  • Sales order creation using BAPI using IDoc

    Hi all, I am getting an IDoc from PI server. I need to process that IDoc in SAP for which I have created a function module. I need to read that IDoc in the FM. Please give me sample code / procedure of coding step by step to validate the data from Id

  • LaCie FireWire External Hard Drive NOT working ...

    I have a 250GB LaCie External Hard Drive plugged via FireWire into my Desktop and it is NOT working properly for the last 12-14 months. I have tried several things, including taking it to the store, and nothing seems to fix the problem. I even upgrad

  • Help required in F-30 transaction

    Hello All, I am having a problem while posting a document throught F-30 transaction. I am posting a RV type of document. I am not populating the assignment field (ZUONR from bseg table). But after completion of the entire transaction/posting the resu

  • Hide a column in Discoverer

    Hi All, I need to hide a column in Discoverer, though I want that column to create a summary at the end. Currently I have a report as below in discoverer. Type Count Sales T1 100 500 T2 200 1000 T3 300 2000 T4 NA 3000 Total 600 6500 This should be ch

  • Keys are sticking on a bluetooth keyboard

    How do you take apart the wireless bluetooth keyboard to clean it? Some keys are sticking after it was cleaned.