I'm trying to install Windows 7 on my MacBook with Boot Camp Assistant

I'm trying to use Boot Camp assistant to install Windows 7. I have a disk, I've done everything right, but for some reason, whenever I click Install on the final Boot Camp prompt, it only gets as far as the Windows is loading files... part after it reboots to the Windows hard drive. I've tried everything, but it still won't work. Im using a 13" MacBook Pro with Retina. It has the latest software version (OS X 10.9.1) and I have a USB with Windows Support Software. The disk is Windows 7 Home Premium 64-bit.
I've been trying for the last two days, and I really need help!
Thanks.

I solved my own problem. I just kept trying, and eventually it worked!

Similar Messages

Hi i am trying to install windows to my macbook through boot camp and i get this message Can't install the software because it is not currently available from the Software Update server.!!!what can i do???please help me!

Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????

You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/

HT1338 I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for windows to complete installation it will hook at that stage please i need help.

I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for window to complete installation it will hook. the installation cannot be able to complete and i really install windows on it, please i need an assistance on how to go about it.

Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea.

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Can I install Windows on my Mac without Boot Camp Assistant?

I was wondering if this was possible, or does Boot Camp Assistant format the hard drive in such a way that makes it possible for Windows to be installed, or can I just create a new partition myself and format it and install Windows without having to touch Boot Camp Assistant?

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Installing windows 7 on Mavericks with Boot Camp

Hey,
I'm having difficulties installing windows 7 on my 2008 mac pro. I'm running Mavericks. I'm trying to install windows 7 onto a extra internal SSD with the installer disc and bootcamp. The bootcamp assistant hangs as soon as I hit install. The screen goes black and freezes.
Any help would be appreciated.
thnx

Hey johnnydoit,
It sounds like you might be experiencing the symptoms from the following article:
Boot Camp: iMac displays a black screen during installation of Windows 7
http://support.apple.com/kb/TS3173
There are steps within to resolve the issue, I'd run through them and see if that helps.
Best,
Delgadoh

Installing Windows On Multiple Macs With Boot Camp?

I have an iMac, White MacBook, MacBook Pro (Late 2006) and very soon I should be getting a Unibody MacBook Pro. My question is, I plan on buying Windows 7 for Boot Camp, and I was wondering if the install limit applies even with Boot Camp. I read that Windows only installs on one computer at a time, and I was curious that if with Boot Camp, it still holds true. Any help would be appreciated.

For now, Windows 7 is free RC download. And there are hints in the EULA that a Family Pack could be in the offering.
I usually buy System Builder, and you can buy Vista SP1 with $9.95 or free upgrade to 7 - retail, Ultimate to Ultimate.

I am trying to install Windows XP Professional using Apple Boot Camp.

I partioned the hard drive using Apple Boot Camp. Inserted with Windows XP disk into CD drive and hit Start Installation. I got a black screen with blinking white underline in top left corner. Computer will not do anything. What do I do now?

http://www.microcenter.com/category/4294967276,4294965769/Microsoft-Operating%20 Systems
Decent prices, there.
Things to note: 32-bit XP only recognizes 3.5 GB RAM. 64-bit XP Home recognizes 16 GB RAM. 64-bit Pro recognizes 192 GB RAM.
If you have Core2Duo or better processor you have 64-bit system.
Darn to heck ... XP is needed. Sorry.

MANY issues after installing Windows XP Home Edition with Boot Camp

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: "This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?" When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: Some of these problems may not be specifically "Application" related, but the top one mainly is. (in my views)
~Twilight

Twilight:
Is it possible that you installed Windows XPSP1 instead of the required SP2? If yes then that is cause of all of your issues listed in your post. You have no sound and you cannot connect wirelessly because you still have been unable to install the boot camp drivers when you inserted the leopard disk.
Please double check to see which version of windows XP did you install. Remember, you need windows XPSP2 for all this to work.
Now, in the event that you installed XPSP1 then you will need to get to the microsoft windows site on a different computer and burn the Service Pack 2 for windows XP on a CD. After that boot your apple mac to XP side and insert the Service Pack 2 disk and install the pack. After that, it will ask you to restart the computer which you must and then once fully booted into XP then insert the leopard CD again and see if takes and installs all the necessary drivers.
Axel F.

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Cannot install Windows 7 32-bit using Boot Camp

I have one of the new iMacs (late 2012) and I can't install Windows 7 32-bit using Boot Camp. Whenever I try to being the installation using the Boot Camp Assistant, I always get the following message: "Need 64-bit Windows installation USB drive or DVD. Boot Camp only supports 64-bit Windows installation on this platform. Please use an USB drive or DVD which contains 64-bit Windows". I have successfully installed 32-bit Windows on my Macbook Pro that is running the same version of Mac OS X and Boot Camp, but I don't know why on this new iMac it doesn't allow me to. Apple's documentation states that I should be able to install either 32-bit and 64-bit without any problem, but this is not the case here. I can't find anything about this problem/error on the Internet either. HELP!!!

AidenT wrote:
Yes, circumstances do change but if Apple is, as they claim to be, serious about seamlessly migrating what is still a large and dominant market share of users from Windows, supporting 32 bit versions is not a nice to have, but a must have.
I don't see why users have to make excuses when there is a clear shortfall of what is promised.
In other discussions, there is talk of an opportunity for Apple to make a significant impact, as Windows 8 has deviated so much from the comfort zone of traditional Windows users. But to make that change, Macs have to support what is still a primarily 32 bit environment in the installed base.
As for the use of VMs, I had a tough time migrating out of Parallels 6 after an upgrade to Mountain Lion broke compatibility so IMHO it is not a long term solution unless you are happy to hand out $50 every 2-3 years just to support the same functionality.
Use Virtual Box, it's free.
32 bit may have a reasonable user base but it's going away fast, if you must use 32 bit Windows and won't use a VM your choice is limited.
Buy a PC, or buy an older Mac.
The rest of your post is speculative and I won't go there.

Install Windows XP 64-bit on Boot Camp.

Can I install Windows XP 64-bit on Boot Camp (Tiger)? Where can i find all the driver for 64-bit? Thank you.

Hi Amen,
XP 64-bit was never supported by Apple.
Therefor you are left to find the needed drivers all by yourself and for Apple-specific hardware you won't find any drivers at all.
Use the System Profiler in OS X to determine what hardware is in your Mac and then go to the websites for these hardware manufacturers to see/find drivers for XP 64-bit.
Personally I am not sure if all this hassle is worth the outcome.
Regards
Stefan

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

yeah I use a windows keyboard both in OS X and in windows on my imac I pref the split ms type of keyboard over the tiny apple keyboard and I pref the razor mouse so those are my main input sources in both yosemite and windows8.1

How do I install Windows XP with boot camp assistant, on my IMac?

How do I install Windows XP with boot camp assistant, on my IMac?

Lion cannot BootCamp XP.
You can install XP under virtual machine software (Parallels, VM Fusion, VirtualBox).
And Windows 7 Pro has XP mode. XP will requires probably days of pathing after install and will be completely unsupported by MS within 1 year, but Windows 7 Pro still has great support from MS.

I'm trying to install Windows 7 on my MacBook with Boot Camp Assistant

Similar Messages

Maybe you are looking for