I'm trying to install windows through bootcamp but my windows 7 DVD is not recognized?
I've been trying for ages and still nothing is working. I've spent £70 on this OS and right now it's been wasted. I've been trawling through forums and the manual and I still have no idea what to do. Someone please help!
I've now tried unplugging all my usb drives, but even though I've now formatted my USB Stick to MS Fat and downloaded the latest Windows support software from apple on to it, when I insert my disc the computer still does not recognize the disc. This is the message I am presented with: http://gyazo.com/454733761330896d5d214339142c3d95.png
Do you have any other possible solutions?
Thanks,
Theo
Similar Messages
-
I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
tt2 -
Boot Camp: Installing windows - CD/DVD driver not found
Hi all,
I have a late 2012 27" iMac - no optical drive. Running 10.9 - Mavericks.
Using Boot Camp Assistant I have created a BOOTCAMP partition, and a bootable Windows 7 USB key.
When I boot into the USB, I can proceed to the point where I click "Install Windows". The next screen tells me there is a missing CD/DVD driver. Well no kidding - my computer doesn't have one.
I've tried removing the USB key and putting it in a different USB port at that step - no change.
I've searched all over, but 99% of the similar problems are from people installing from a disc - I'm installing from an ISO on a USB key.
Any ideas?Can you verify the MD5/SHA1 of the DVD with the ISO using OS X 'openssl md5' or the M$ FCIV tool? The source of your ISO should be able to provide MD5/SHA1.
OS X Example
openssl md5 ~/Desktop/GRMCPRXVOL_EN_DVD.cdr
MD5(/Users/MyName/Desktop/GRMCPRXVOL_EN_DVD.cdr)= 977f4f0f1400be91855789213e07b031
Windows FCIV example
D:\>C:\"Program Files (x86)"\FCIV\fciv
// File Checksum Integrity Verifier version 2.05.
Usage: fciv.exe [Commands] <Options>
Commands: ( Default -add )
-add <file | dir> : Compute hash and send to output (default screen).
dir options:
-r : recursive.
-type : ex: -type *.exe.
-exc file: list of directories that should not be computed.
-wp : Without full path name. ( Default store full path)
-bp : specify base path to remove from full path name
-list : List entries in the database.
-v : Verify hashes.
: Option: -bp basepath.
-? -h -help : Extended Help.
Options:
-md5 | -sha1 | -both : Specify hashtype, default md5.
-xml db : Specify database format and name.
To display the MD5 hash of a file, type fciv.exe filename
D:\>C:\"Program Files (x86)"\FCIV\fciv -add Windows8.1-64bit.cdr
// File Checksum Integrity Verifier version 2.05.
f104b78019e86e74b149ae5e510f7be9 windows8.1-64bit.cdr -
Installed itunes for windows- ipod+dvd drives not recognized by my computer
After installing i tunes I received a message saying that there were errors during install. Importing and export (burning) would not be possible through i tunes, I should re-install itunes. I have reinstalled i tunes.
On restarting my computer i have encountered issues with drives, I cannot find the ipod in "my computer" nor can i find my dvd drive. The drivers for the dvd drive are installed.
There is possibly confusion over the drives allocated letters ie it maybe the hardware is trying to use the same designation.
Is this a common issue with installing i tunes, I can't find any other threads on similar issues. Any suggestions on fixes greatly appreciated.ahhhhhh, many thanks for the link. for a while (about a year ago), Packard Bell UK was including those instructions on their troubleshooting pages, but then they went away. (or i just couldn't find where they'd been shifted to.)
usually nowadays i crank out the MS instructions instructions instead:
(MS) CD-ROM access is missing and messages cite error Code 31, Code 32, Code 19, Code 39, or Code 41 after you remove Easy CD Creator in Windows XP
... but it's a (slightly perverse) sort of comfort to know that i'm still recommending basically what Packard Bell recommends. -
Trying to install windows through bootcamp - now i'm screwed...
Ok so bought my very first mac yesterday and it has been a joy for the first 48 hours...sarcasm. I was trying to install windows xp - sp2 on my mac that has the latest and greatest version of leopard on it. Used boot camp to set up partition and was prompted to insert windows installation cd...all seemed to be running smoothly...until: the installation "completed" said that it needed to reboot to complete installation and that if there is a floopy disk in drive a:, to remove it. (***? there is no floppy disk on macs anymore...) so my computer will restart and goes to a page that says to press any key to boot from cd...ok 1)if I do press a key it leads be through the entire installation all over again and then reboots and we start again with the press any key to proceed with installation part...or 2) don't press any key and the it says "disc error, rebooting computer". so I thought that maybe i should just use parallels instead of bootcamp until I could research a bit more, but now since i can't get the computer on, it won't eject the cd - and unlike a pc, there's no button to make it eject no matter what...tried holding mouse key while shutting down and rebooting and it won't budge...
can someone please help me?? (btw - i'm writing from my problem-less pc)...i really don't want to regret the mac...I'm a new macuser too (2 weeks). Try this. Turn off the compter and then, restart and hold down the OPTIONS key. A menu choice showing a hard drive should come up on the screen (and nothing else), this is the mac hard drive. Click on the arrow below the HD and it will boot into the MAC OS. Then, eject the CD from the mac OS. I think that should work.
I didn't have any problem with XP installation in boot camp, used a 32 GB partition (thats the max for FAT32) and used fat32 so I could access windows files with mac programs. -
Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????
You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/ -
Trying to install Windows 7 with Bootcamp on my Macbook with a faulty CD drive
I am trying to install Windows 7 with Bootcamp on my Macbook A1278 (OS 10.6.8) with a faulty CD drive (CDs and DVDs get stuck in it and I had to get it removed in an Apple store, so I don't want to use it anymore). I have got a licence for the product but I am only in possession of the ISO, is there any way to install it using a USB stick?
I don't have many options while launching Bootcamp, only
"Download the Windows support software for this Mac" but when I try I get a message explaining me that the download could not continue as the software is not available,
or
"I have the Mac OS X installation disc [...]" but obviously I can't use my CD drive so this is not an option. I tried it anyway and I created a Windows partition but when asked to "start the Windows installer", I can only continue by insering a CD.
I tried to use a USB stick and added the ISO on it but nothing has changed.
How can I install my copy on Windows?...BobTheFisherman > Hem, yeah, that is stating the problem and not working toward resolving it.
Turbostar > I checked the link and it seems to be relating to the first video I have seen on the subject. I tried to install Tuxera then to work with rEFIt, but I did not get any result yet (I don't know if I am doing something wrong during the USB writing process as many different ways are explained on different websites).
So far my last try was to launch Windows 7 USB DVD Download Tool on VMware Fusion but it the only disk shown is A:\ Removable disk (not the name of my USB) and it is stated that the disk is being used by another program, even though it's not open on the Mac side.
Some websites are advising to write the copy of windows on a USB via a PC and then launch it on the Macbook, so I might try that in the next few days. I will keep you updated.
If anyone has another option I might not have think about, or an advice on how to efficiently create a bootable Windows setup USB with my Mac, please let me know! -
I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?
You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation -
Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?
Was your Bootcamp info.plist manipulated to change any options?
-
I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?
Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education. -
Was trying to install windows 8.1 but didn't install bootcamp first. Am in a loop. Keep coming back to the windows setup page. What to do?
Please reset NVRAM - Startup key combinations for Intel-based Macs - Apple Support and OS X Mavericks: Reset your computer’s PRAM. You have Bootcamp settings in the nvram that are causing problems.
-
Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned." Huh?
You must use the Windows formatter to format your Windows partition NTFS. Please be sure you select the Windows partition otherwise you might end up formatting your OS X partition NTFS.
-
Trying to Install Windows 8.1 on Bootcamp
I'm trying to install Windows 8.1 disk using Boot Camp Assistant and USB SuperDrive. When i have "Download the latest Windows support software from apple" selected this is what happens.
If I unselect "Download the latest Windows support software from apple" and continue, I get to the "Creat a partitian for Windows" page. After choosing how much space for Windows to have and clicking install, this is what happens.
Then I go back and the process happens all over again. What do I do?This is one of the reasons why I never used BootCamp after testing it once in 2009. I got VMWare Fusion and never looked back. Now I use Parallels, but I still would rather have a VM of Windows than have to reboot and basically cut myself off from OS X while doing Windows stuff.
Seriosuly, you should check it out: http://www.parallels.com/products/desktop/ -
Trying to install Windows with Bootcamp
Hello. First, I do know this has been a recurrent trouble for a lot of Mac user who have tried to install Windows using Bootcamp. Believe me, I've looked it up both here in the Apple Communities and in saint Google. My situation is, however, that I have replaced my optical drive with a SSD, and now my optical drive works externally, via USB. Everytime I try to install Windows in a dedicated partition in the SSD, it just stays forever in a blank screen with blinking cursor.
Apple's troubleshot won't work for me, and I'm beginning to think that the issue has more to do with the optical drive itself. I tried:
To install Windows on the HDD instead of SSD.
To unplug every USB (even mouse), except for the optical drive with Windows 7.
To install it via USB stick (creating a bootable .iso with Disk Utility). In this case the usb stick does not even appear when holding option key.
To try another Windows 7 version (32/64 bits).
I have even read it might be because of a bad installation of the RAM memory... this makes no sense?!
If anyone has encountered this same situation, I'd appreciate some help. Hope I can get this done, because Steam's Age Of Empires won't ever work in OS X :S
Thank you all for reading and helping!
MacBook Pro
13-inch, Early 2011
2,3 GHz Intel Core i5
8 GB 1333 MHz DDR3
OS X 10.9.5If your Mac was originally configured with a built-in Optical drive, and it was later replaced, Bootcamp knows your original configuration and will not work properly in the modified configuration, because it uses your Mac's model string (found in About This Mac -> More Info -> System Report -> Hardware) for example, MacbookPro 11,3. The only supported method to install Windows is to restore the original HW configuration and install it and then move hardware around.
Please see Unable to Install Windows 8 on secondary Hard Disk . -
I'm trying to install windows 8 on my MBPr but getting an error when partitioning the disk. 'An error occurred while partitioning the disk'
You posted your Bootcamp question in the Macbook Pro forum. Your question has been asked and answered many times in the Bootcamp forum. https://discussions.apple.com/community/windows_software/boot_camp
When you post in the Bootcamp forum include the complete and exact error message.
Maybe you are looking for
-
Second Admin account with different user name. Set up desktop/user settings etc. Log out and log back in. Hard drive and other icons not on desktop. Dock apps revert to default. Safari history and bookmarks disappeared. Other anomalies. ???
-
Airport connected to modem but no internet.
So I have the Airport connected to my cable modem but the Airport just blinks orange the whole time and the activity light isn't moving at all on the modem and I can't get online. I've tried unplugging the modem and Airport then like 15 minutes later
-
Emailing and saving and editable form
Hi there HELP! I have converted an existing legal agreement to an editable pdf form, which will be filled out by users. Once it has been filled out, I would like the user to have the option to either email/save this form. The user will need to email
-
Reading TDMS files in Matlab - problems with the example code
I want to use the TDMS files to store data and do offline analysis in Matlab, version 2009b (either on Mac OS10.6 or Windows XP). To test the data import in Matlab I tried the example from http://digital.ni.com/public.nsf/allkb/0EEADA99DC7D00A4862572
-
IPod Touch (4) does not automatically fetch email
My iPod Touch 4 does not fetch email unless I force it to. Push is off and my mail accounts are all working (MobileMe & Gmail). I've tried everything and the device just sits there, even though it is set to fetch new emails every 15 minutes. Any idea