I'm trying to install xCode, and it asked me to quit itunes. But itunes has quit and the installation has stopped. how do i fix it.

it asked me to quit itunes. But itunes has quit and the installation has stopped at the instalation alert for itunes. how do i fix it.

Okay i just figured out how to fix it. all i did was go to my Activity Monitor and searched all processes for itunes, itunes helper was running. i just quit it and intaller.app was just fine. thanks thou, ill give you the points for trying to help me.

Similar Messages

  • HT1926 I am trying to install itunes but a message says that the installer has been interupted? Any ideas?

    I am trying to download itunes again after restoring my laptop to factory settings. I can download it & it starts to install but then a message comes up saying 'the installer has been interrupted'
    Has anyone any ideas of how to overcome this?
    Thanks

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Trying to install Lion. says this disk is not enabled (journaled) - but when I look at the drive it actually is os extended journaled - Stuck! Have tried repair disk permissions and still no luck

    trying to install Lion. says this disk is not enabled (journaled) - but when I look at the drive it actually is os extended journaled - Stuck! Have tried repair disk permissions and still no luck - any thoughts? Have spent two weeks trying to get apple support and itunes to help me get lion after a hard drive fail and now they are closed and I really just want to get moving!

    Are you installing OS X Lion over an existing installation of Snow Leopard, or are you reinstalling?
    First be sure you have everything on your system backed up. Then reboot with the Command-R keys held to get to the OS X Lion recovery volume. In here, select Disk Utility and use the First Aid tab in here to run a verification on your boot drive. If there are any errors, fix them and then try the installation again.
    The next step would be to format the drive, so with your backup secured, use Disk Utility's Erase tab to re-format the drive to Mac OS X Extended (journaled), and then quit Disk Utilty and attempt the installation again.

  • I am trying to launch iTunes but receive a message saying the "version has not been localized for this language" and to "run the English version" - but I dont know how ...

    I upgraded the version of iTunes about a week ago but have not logged on since. when trying today I have received the following message -
    "This version of iTunes has not been correctly localized for this language. Please run the English version".
    I though I would try to update the version from the Apple site but to do so I have to log into iTunes which is the problem.
    Any help would be greatly appreciated!
    Thanks,
    Ronnie

    Start by trying to repair iTunes from the programs and features control panel.
    Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Im trying to update my itunes but its keeps coming up with invaild signature. How do i fix it?

    Im trying to update my itunes but it keeps saying invaild signature. How can i fix this? Its driving me mad

    Assuming a PC restart does not fix the problem, the simplest thing is to get a friend to download the installer for you and put it on a memory stick.
    This issue has been associated with router problems.
    If a known good copy of the installer still gives the same error there may be a problem in Windows.

  • I have an iPod touch, with iOS 5.0.1 I have manually added lyrics and album covers on iTunes, but they aren't syncing over.  Why?  How do I fix it?

    I have an iPod touch that I bought recently, and have updated everything to the iOS 5.0.1 version.  I have checked my music settings, and it has Lyrics and Podcast Info "ON".  I have manually added the lyrics to several songs, as well as album covers, and neither one are transferring over to the iPod touch when syncing.  How do I go about fixing this?  I have double checked all the settings I can think of to get this transferred over.  I have even double-checked the online manual to make sure where I would even find the lyrics, and how to get to them...yet....nothing.

    I didn't realize I had to delete everything and sync again.  WHEW!  Thank you so much.  That worked.

  • I keep installing and unstillaing my iTunes but it still says my ipod cant be detected, how can I fix it?

    I've installed and uninstalled my itunes about like 30 times, I've restarted my ipod and everything. It keeps saying it wont be detected. I tried plugging it into my friends computer and it worked but it wont work on mine. And I know I need the 64 bit. Help?

    Try restoring your iPod.

  • Unable to open firefox, tried to uninstall to reinstall and it says that firefox is open but when i check there are no apps open how do I fix this? I had to go onto internet expluerer to get here

    I have not been able to get onto the internet using firefox. when I click on it it goes through the motions but nothing happens. I had to use internet explorurer to go to the net. I tried to uninstall firefox to reinstall it thinking there was a problem and it tells me that I have one or more apps on firefox open when I go to cntl/alt/delete is shows me nothing is open. I can not uninstall firefox. it is not my computer since I am using internet eplr. right now. How can I solve this I like firefox and want to continue using it but this is a problem.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • I try to right click and open in new tab... but when i right click it doesnt do anything, how do i fix this?

    Well i go to right click a new link to open in a new tab and it don't let me right click it does nothing... it doesn't bring me the drop down...
    == This happened ==
    Every time Firefox opened

    Hello.
    It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
    Also, remember that you can simply middle-click any link or interface button to open it in a new tab. Middle-click is the mouse wheel, just press it down. Or the middle button of the mouse, if you have one of those. Of course, there may only be two keys, and middle-click may be impossible, but just so you know, middle-clicking links is the faster way, and how everyone does it, basically.

  • I am trying to connect my iPad to a canon MX436 printer an my iPad is not recognising the air printer! How do I fix this?

    I am trying to connect my iPad to a canon printer and the iPad is not recognising the printer? What do I do?

    There are troubleshooting suggestions at the bottom of this article:
    AirPrint basics

  • TS4522 I have a finished project, but Final Cut Pro has grayed out the export option. How do I fix this to upload my file to youtube and burn dvds?

    Hi guys, I really need help trying to figure out why Final Cut Pro will not allow me to export my project. I have done this in the past and had no problems at all with other projects, and I have done nothing different from what i can tell. Any help???

    Hey Tom,
    Thankyou for your help. No, I have done this and it does not work. I have tried clicking and dragging, selecting the file in the project library, selecting individual files etc etc etc. The only thing that may have helped me out was last night...I clicked on a tab in FCP on the far right side (that must have something to do with exporting as well) and a small screen popped up after clicking it stating i cannot export the file while it is still referencing media off of the camera. I dont understand this either? I do have to have my camera connected before FCP will RECOGNIZE the media clips, but they have all been imported to my external hard drive and once i click import from camera, it is complete within seconds, so the hundreds of video clips i am using are obviously saved on there somewhere already....im at a loss here as to what to do. Do i have to literally download ALL MEDIA in each project to my computers hard drive before final cut pro will allow me to export any of the projects i create?? This seems like such backward thinking...I dont have nearly enough room on my computers intenal memory to do this with all my video clips!!!

  • My laptop that i loaded my ipod onto when i bought it is not working, and i now have a mac, and recently purchased an album from itunes, but it won't load/ sync to my ipod. how do i fix this?

    just bought an album from itunes but it won't sync to my ipod. i was using a PC but am now using a mac. Is there anything i can do?

    iTunes & iPod Hints & Tips
    iPod: Frequently Asked Questions

  • I am trying to install xcode on a macpro running OSX 10.6.8 .  It installs, but with the error that there is no unix support.Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?

    I am trying to install xcode on a macpro running OSX 10.6.8 .  It installs, but with the error that there is no unix support.   Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?
    thx,
    Pandabig

    Xcode 4.x cannot be installed on Snow Leopard.  You need a 3.x.  So if that is what you used then yes, you need to install lion.   If connect.apple.com still alows registration or logins using an existing appleid then you could download the last xcode 3.2.6 for free.

  • I have tried to download Mavericks on my 2010 iMac(10.6.8), but nothing happens, not even the install app downloads, also I tried to download chrome, I moved it to the applications folder and when I opened the folder it wasn't there

    I have tried to download Mavericks on my 2010 iMac(10.6.8), but nothing happens, not even the install app downloads, also I tried to download chrome, I moved it to the applications folder and when I opened the folder it wasn't there. I have a 1tb hard drive that is mostly empty. By the way I just got this imac used from a reseller.

    Mavericks downloads into the Applications folder, where you can install it.   Some Mac App Store Troubleshooting information and how to resume a download that was interrupted; some of the information here might get you an answer.   Failing that, try contacting Apple Support.

  • When trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas

    when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas

    JJMack <[email protected]> wrote:
    =============
    JJMack  created the discussion
    "when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas"
    To view the discussion, visit: https://forums.adobe.com/message/7092876#7092876

Maybe you are looking for

  • Adding hours/day to a date

    Hello, I have field of length 20 which contains date in the format “mm/dd/yyyy hh:mm:ss”. I want to add 5 hrs, 8 hrs, 2 days to this date value depending upon some condition. Can anyone please suggest how to do this or any FM which does this. Thanks

  • Does Apple have tech support people coming here regularly?

    I note that there are several questions with zero replies. Does this mean that Apples does NOT populate this board? Isn't this supposed to be part of their tech support strategy? Why aren't there more answers here? Beth

  • License Management / Oracle Discoverer

    In my last email I described our approach to analyse archives with Oracle discoverer. In the actual state two questions arise for our future work : 1.     Is there any possibility to integrate the functions of Discoverer      in the own application b

  • MOTION TRACKING PROBLEM IN ADJUSTMENT LAYER

    Hi. I'm trying to blur out a logo on a shoe, but I'm having some difficulty getting the tracker to stick to the logo.  Can someone help me, please.  Here are the steps I took: 1.  I used Tracker to track a logo that I want to blur out. 2.  After anal

  • Yes or No ... Does iMovie'11 work with LION ?

    I've upgraded to it, but it can't even get it to import clips to start a project?! I also tried dragging clips to the Project Library. It won't open a project that I started in iMovieHD. What I NEED to do is create a side by side video comparing old