I'm trying to loack a document with mac os x 10.6.8 They only have infor. on how to lock it with lion 7.0 on the help button. Can I lock it with snow leopard?

I'm trying to lock a document with mac os x 10.6.8 I only found infor. on how to lock a document with os x lion 7.0 on the help button. Can I lock it with 10.6.8 operating system?

Thank you. I did what you suggested and it worked.

Similar Messages

What is most recent boot ROM compatible with Snow Leopard?

Just got a fine refurb Qc i5 27" iMac which was reportedly manufactured in May 2011. It's tested and warranteed by Apple, and came with Lion installed. I am hoping I can back-grade it to Snow Leopard to make the human interface like the file systems on our other 10.5/10.6 machines.
I am guessing that I might be able to do this if it indeed was made in May, before Lion shipped on all newer machines.
I suppose I can set up an external drive and install 10.6 externally and see if the installer allows it. Wouldn't that indicate the the ROM is compatible with 10.6?
The iMac boot ROM version is
IM121.0047B0A
Thanks for a definitive answer!

Update from OP: I made an extra tray in my MacPro with a test install of 10.6.8. Booted ok as alternate drive in that machine. Then I used Carbon Copy Cloner to make a bootable copy on an external LaCie drive. Plugged the LaCie into the quad-core iMac, which recognized it as a potential startup drive via FW 800. It booted fine. I suspect if I zeroed the iMac's drive, then I might be able to boot the SnoLeo install disk and install, or boot from my LaCie external drive and use CCC to clone to the iMac's drive.
I'm concluding that the May 2011 firmware is fine for 10.6, as it was shipped that way on the spring releases. So now I'm guessing that Lion's new recovery structure may interfere with a "backgrade" install. I'll scrape and sand the internal disk after cloning it for good measure, then try to install 10.6. More notes in a week or so.

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

Dear Nathan,
Many thanks. To the best of my memory, that is how I got where I am today. Initially I had one failed setup, then discovered compatibility mode and ran using it. The result was not an obvious failure, but something was not there because not only were some drivers missing (wi-fi, trackpad, ...) but (much to my disappointment) the 3.1 update would not run. It complained that 3.0 wasn't there. If I hardwired to my home network, the machine would do almost everything I wanted, but the graphics were slow and clumsy. That is when I hunted around for the NVidia driver and downloaded it from NVidia. And that is where I stand now.
My son found this link http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/
which has instructions claiming to do the install straight to Win 7 without using compatibility mode.
Given that my clumsy efforts to patch things up have probably necessitated a Win 7 deinstall and reinstall to test either your plan or the one my son found, I am inclined to sit tight for a couple of days to see how much I can learn.
I appreciate your interest in this problem, and if you are up for reading the process at the link my son found and commenting, I would be grateful.
In any case, many thanks, Paul

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

My Snow Leopard 10.6.3 has Safari 4.0.4 but this cannot be used for the new features of iTune. I tried upgrading to Safari 5.1.7 but it needs Snow Leopard 10.6.8. Where can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?

My Snow Leopard 10.6.3 has Safari 4.0.4 but this cannot be used for the new features of iTunes. I tried upgrading to Safari 5.1.7 but it needs Snow Leopard 10.6.8. Where can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?

Hi..
here can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?
Not possible. You need to update to v10.6.8
Click your Apple menu > Software Update
Or update using the this download > Mac OS X 10.6.8 Update Combo
Then restart your Mac.

Tried to run a CD I had run with Snow Leopard. Now (with Lion) getting a message that PowerPC applications are no longer supported.. How do I overcome this? Thanks

Tried to run a CD I had run with Snow Leopard. Now (with Lion) getting a message that PowerPC applications are no longer supported.. How do I overcome this? Thanks

Well Lion does not support power PC applications. They only way is to upgrade the application, or if your have SL disks, reinstall SL.

Has anyone tried DisKWarrior V4.2 with Snow Leopard V10.6.3? Does it work?

Has anyone tried DisKWarrior V4.2 with Snow Leopard V10.6.3? Does it work?

Well, there is an article on MacWorld saying there were a lot of changes and improvements to Disk Utility.... and those have a way of impacting things.
I got surprised to have trouble after 10.6.3 with SuperDuper on two different systems, that I am still scratching my head over, but had to use Carbon Copy Cloner and RESTORE in Disk Utility for now, would crash (sent report to both) as soon as SD began.
TechTool Pro 5 is another that sometimes needs to take a couple weeks to see if they need an update and validate against the final shipped build.

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days.

When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

What kind of CD are you burning (Audio or MP3)?
If you're burning an MP3 CD, the songs must already
be in mp3 format.
If not, iTunes will tell you that you have no songs
in the playlist.
M
I was making an audio cd. But I have since found out what the problem was. The files in my PLAYLIST I converted to aiff, since they were SDll files (I thought they were similar to AIFF, and they PLAY on Itunes...just won't burn.) When I selected the songs in the playlist and converted them...I thought all those files were converted, They were not. The converted files went into my LIBRARY, even tho I selected the ones in the playlist...and once I exchanged the SDll versions of the songs in my playlist. THEN they burned fine...but still...it's confusing..you say convert..it says it's been converted..and what they don't say is it's not been converted inside the playlist...where I had selected the songs...It just ADDED aiff versions..but only in the library...Anyway, that's what happened. But it's strange that it PLAYS SDll but won't burn them....and you'd think, logically..the ones you selected would change...but they don't. Playlists are mainly pointers to the actual files I guess...a sort of Alias..
At least it works now. But it's sad that the latest itunes does more, but also does LESS...as I used to be able to burn SDll files. Now I'll have to convert all my files to AIFF, and mp3's as I assume my ipod video won't play anything but mp3's?

In Contribute CS3, using MacBookPro with Snow Leopard HELP locked

I am using Contribute CS3 and I can connect to site, but when I get into the edit screen whenever I click anywhere, I get the rainbow spiral and it literally takes 20 to 30 minutes to stop. then when I click again to do something it starts again and I can't ever make any changes. It says I also have an unpublished document but when I click on the "unpublished document" hot words, I go into spiral again. what can I do? I am on a MacBook Pro with snow Leopard.

That error is NOT because of the activation. That's a separate issue.
http://kb2.adobe.com/cps/401/kb401528.html
Bob

Is there a way to make Silverkeeper work with Snow Leopard?

I use a computer "given" to me by my school. I do have administrative privileges, but IT installs all OS software and configures it per the network on campus. Last February, they installed Snow Leopard and I began to restore all my files from my external backup. I'd been using Silverkeeper for years, I prefer the way it works (basically, it copies all files, then, with subsequent backups, can be set to only update changed files and add new files into the backup. In other words, there is only one folder. As a designer, I have the "v1,v2" so deeply ingrained in me that I never loose the early versions of documents). In short, Silverkeeper works for me. Time Machine is an interface that does not.
So, IT installed Snow Leopard, I bring my machine home, and start bringing files over. For every single file, I had to type in my password. The drive, every folder and every document was suddenly marked as "Read Only". I tried changing permissions. Didn't stick. I repaired permissions, tried changing, still wouldn't take. I contacted IT, one of the guys opened Terminal and typed in something (he never gave me the line of code, so I can't tell you what he did. I asked him what he did, he just said, "It's ok, I just gave you full permission. Don't sweat it." I got home, tried to bring over some files, and they still asked for my password. Nothing had changed. Except that the machine started sending urgent error messages. I disconnected my hard drive, rebooted, and could not get past the grey screen.
Even longer story short, IT wiped my computer, reinstalled SL, I brought in my hard drives, they worked with them to have them all "Read Write" again, and said I had to use Time Machine as a backup. They blamed the entire mess on Silverkeeper.
So, the semester went on, I've been using TIme Machine ever since and I hate it. Hate it. I want my Silverkeeper, or some other such backup that gives me one file, and all my records kept in that file, in a visual manner. I hate these dates, with the multiple folders, and the threat that it will throw away old files (I just resurrected a file from a Quark doc made in 1994!). But IT has me too afraid to use Silverkeeper. Personally, I think something went wrong with the first install, then IT screwed it up even more by opening up Terminal and "fixing" the code, and they refuse to admit they have ever made a mistake. BTW, I've been using Macs for 22 years and have never experienced anything like this. I have done more system upgrades myself than I can remember, I have troubleshooted my own machines for years, and kept them humming beautifully.
It's summer, and I want a different backup. Please help, or let me know if I dare brave my old favorite once again. If there is a utility that I have to buy, I will. I'm so fed up and frustrated with the interface on Time Machine, I'm ready to go back to the bad old days of manual backups.

Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
http://www.lacie.com/silverkeeper/
If it's messing things up you could try asking LaCie Support for assistance.

Tons of problems with Snow Leopard

Made this post over at my blog but I figure this would be a better forum for it in hopes we can get some of these issues resolved... it seems like Apple has pulled a Microsoft and released what appears to be a beta version of Snow Leopard! Inexcusable bugs are appearing left and right, and the supposed "improvements" have actually hindered my computer performance and productivity...
This really surprised me. After years of releasing amazing OS upgrades that seemed to make the best OS even better, it seems like Apple has taken 2 steps back with Snow Leopard. I can't tell you how upset I was to realize I was experiencing many problems that I previously only saw on PCs.
After one of the many bugs popped up again on my computer, I got frustrated and started combing the internets for a list of known bugs in the OS and the inevitable slew of Apple users registering their disgust. Unfortunately, my search didn't turn up anything but positive reviews of the OS and very limited complaints on a few message boards. To this end, I'm posting this entry to try and help other users who are experiencing similar issues and hopefully get Apple to clean up this mess of an OS.
Below I've created (and will be adding to) a list of problems I've experienced in OS X 10.6, Snow Leopard. I encourage everyone to list your Snow Leopard issues in the comments as well, in hopes we can create a master list of problems.
I am using a 2 GHz Black MacBook (Core 2 Duo) with 2GB of RAM. Keep in mind Leopard (OS 10.5) was running flawlessly on this more than capable machine. I am currently running the latest Snow Leopard build, 10.6.1. I upgraded 10.5 with the retail version of Snow Leopard, integrating my current apps into 10.6 (did not do a clean install). I've organized my issues below by application. This post is less about third-party applications and more about Apple apps/built-in OS features, as Apple is fully accountable for these pieces.
APPLE APPS
Airport:
• Airport is now incredibly slow getting past the "searching" status message and into what was known as "scanning" status in 10.5 (now called "Looking For Networks…" status message). This issue occurs most often when I revive the computer from sleep. I have to turn Airport off and on again, then wait an inordinate amount of time to get past the useless "Searching…" message.
Volume and Sound:
• I rely on my volume control icon on the toolbar. I change my system volume dozens of times every day (due to my job)... previously, I could click the volume icon then simply roll the scroll wheel on my two-button mouse to adjust the volume. Now, I have to actually move my mouse down onto the volume slider area before my scroll wheel works! What gives? In allowing the user to fine-tune the volume levels, Apple removed this functionality for some reason? This is a real pain for me as the extra second it takes to do this really adds up by the end of the day.
• Sound now starts stuttering for no reason? When I wake my computer up from sleep and I have headphones or speaker plugged in, the audio stutters greatly. I have to unplug then re-plug my speakers or headphones to fix the issue! This is a problem I saw on many PCs due to sound cards not playing with Windows nicely, but was NEVER an issue I experienced using OS X.
• The Mac OS startup chime plays on my MacBook external speaker when I startup, even though I have speakers or headphones plugged in! It also does not matter if I had my system volume on mute when restarting • the OS seems to now decide what volume my system should be at when I start up!
Safari:
• Defaults to 64-bit mode silently, and this breaks most plug-ins (my issue was with download manager iGetter, specifically). I had to manually Get Info on the app, then switch back to 32-bit mode, which it seems Apple has not designed Snow Leopard to support properly?
• Freezes and crashes more often, most often when running Flash video. This occurs when I open multiple videos on YouTube, for example.
• Hogging memory even more than it used to (1GB of RAM to run the app?? Really?)
Stacks:
• Apple seems to have completely removed the functionality or sortable sub-folder listings? For example, if I choose to sort my stack by "Date Modified", the initial list of folders in the stack appear by date, but all my sub-folders appear in Alpha order, and there is no way to change this! Come on Apple, why remove this?
iPhoto:
• Freezes completely when I go to "Export…". My Export opens on the Facebook tab of the dialogue box, and it seems the issue occurs when iPhoto can't find the source image. Rather than an error message though, I get the color wheel of death.
Spotlight/Search:
• When I search from a Finder window, sometimes I get the new feature of sortable results columns to work, but sometimes I don't. Seems arbitrary when it works and when it doesn't.
System Preferences:
• More of an annoyance, System Preferences now has to restart the first time I click on any third-party preference in "Other". Some work, most don't.
Install:
• In previous OS X upgrades, Apple gave me the option to "Backup and Install". This option was not present on Snow Leopard, so not sure what a user can d if they do not have a Time Machine backup and their install fails.
Preview:
• Preview slows down considerably when opening multiple files.
THIRD-PARTY APPS
Entourage:
• Entourage froze up when I tried to simply delete one of my email accounts. The Accounts window went blank and the application froze.
CS3:
• Slower than ever, Photoshop is running at a snail's pace.
I hope everyone can contribute to this string and get Apple to fix these problems.

I can address some of these:
Safari defaults to 64-bit mode silently, and this breaks most plug-ins (my issue was with download manager iGetter, specifically). I had to manually Get Info on the app, then switch back to 32-bit mode, which it seems Apple has not designed Snow Leopard to support properly?
All applications, to the best of my knowledge, will run in 64-bit if they include 64-bit code. With most you'll never notice, but if an application supports plugins, then you have to pay attention to whether the plug-in is available in a 64-bit version. More and more are becoming available, but not all. If you have plug-ins that aren't, you need to set the app - Safari or whatever - to 32-bit mode. This is not a bug; it's necessitated by the conversion to full-time 64-bit support. The developer of iGetter claims that an update for compatibility with Safari in 64-bit mode is under development but no time frame has been given.
Snow Leopard is perfectly capable of running 32-bit apps. You just can't mix them, running a 32-bit plugin in a 64-bit app.
Freezes and crashes more often, most often when running Flash video. This occurs when I open multiple videos on YouTube, for example.
Have you installed the latest version of Flash? Flash is almost always a bit problematical, but I've had no problems running Flash content on any site with SL.
Hogging memory even more than it used to (1GB of RAM to run the app?? Really?)
This may just be an issue of not being clear on how Mac OS X allocates memory. This article may provide some insight:
http://support.apple.com/kb/HT1342
More of an annoyance, System Preferences now has to restart the first time I click on any third-party preference in "Other". Some work, most don't.
This is normal if a preference pane has not been provided in a 64-bit version.
In previous OS X upgrades, Apple gave me the option to "Backup and Install". This option was not present on Snow Leopard
Actually it was called "archive and install" and was removed as an option as no longer necessary. The normal installation creates all necessary new files and more robustly replaces old ones, so having an archive of the old system folder was deemed to no longer be needed.
so not sure what a user can d if they do not have a Time Machine backup and their install fails.
To restore completely from a full Time Machine backup, you erase the disk using Disk Utility from the menu in the Installer, then choose to restore from a TM backup.
Preview slows down considerably when opening multiple files.
Seems to work OK for me. I've had as many as twenty open with no noticeable slowdown. But you may be opening much larger documents than I have.
Entourage froze up when I tried to simply delete one of my email accounts. The Accounts window went blank and the application froze.
Impossible to offer any advice here without knowing what version of Entourage you're using, whether it's been fully updated, and what type of email account this was.
Regards.

HP 1312nfi Multi-funtion printer & brand new Macbook Pro with Snow Leopard

Hi,
I just got my Macbook Pro with Snow Leopard May 2010. I can only print and fax with my 1 year old HP 1312nfi color laserjet multi-function printer. I cannot SCAN at all. I tried loading the software that came with the printer but it wouldn't install the 'Print Director' as I had on my old iMac (with Leopard). Then I went to HP and it said not to install the software that came with the HP printer because Snow Leopard has it all. I read that there are 3 ways to scan from my computer which none of them work. I brought up the printer then clicked printer setup and when I try to bring up the 'print utility' from the last tab, it won't open anything. Where is the printer utility now? Why can't I scan? There has to be a way. HELP please?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

How do I install Lion on an MBP with Snow Leopard 10.6.8, Boot Camp'd XP and a Master Boot Record?

I think this is called "a pickle."
The machine is a 13" MacBook Pro, 2.66 GHz Core 2 Duo w/ 4 GB RAM and a 500 GB HDD.
The HDD has a Snow Leopard 10.6.8 partition, and a Windows XP partition, via Boot Camp. Its Partition Map Scheme, sadly, is a Master Boot Record. I need to reformat it to a GUID Partition Table scheme to install Lion, but when I attempt to boot it from the Snow Leopard 10.6.0 DVD to wipe the drive, it grey-screens. Dead end.
From what I can gather on the forums, I can't boot a 10.6.8 machine using a Snow Leopard 10.6.0 DVD. I can't find my grey DVDs for this machine – still looking for those – but I expect those won't work either, being Leopard-generation?
The machine works fine, for the most part, including the optical drive. Has occassional display and wake glitches. Its HDD is backed up on a Drobo via Time Machine. I also have a 15" MBP Core i7 (with the exact same problem: 10.6.8, XP, MBR) which I can use for Target Disk Mode via FireWire. If I try to wipe the HDD on the 13", using Disk Utility on the 15" via Target Disk Mode, will the 13" then boot successfully from the Snow Leopard 10.6.0 DVD?
I just want to wipe the 13" machine, reinstall a fresh copy of Snow Leopard, then update it to Lion and restore from Time Machine, and never touch anything Windows-related ever again. (And then do the same for my 15", for which I've found my 10.6.3 grey disc. Not sure if that's any more promising.)
Any help appreciated!

Sounds like something is wrong with your disk. Have you tried cleaning it?
The Snow Leopard 10.6.0 DVD is fine – it mounts on both my 13" and 15", and I successfully created an image of it on my 15". I also tried my wife's Snow Leopard 10.6.0 DVD, also clean, which produced the same grey screen result.
Have you tried to use boot camp to erase the Windows partition?
Yep, this is supposed to be the proper way to remove a Windows XP partition from Boot Camp, so this was the first thing I tried. I get the same error as everyone with a Master Boot Record scheme appears to get:
The startup disk cannot be partitioned or restored to a single partition.
Back up the disk and use Disk Utility to format it as a single Mac OS X Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
So, if I can't launch the Disk Utility from the Snow Leopard DVD, my next best guess is wiping it from my 15" over Target Disk Mode. However, if I try that, and still can't get it to boot from the Snow Leopard 10.6.0 DVD, then I'm stuck with an MBP without an OS.
My conclusion – that 10.6.0 DVDs can't boot to 10.6.8 machines – was based on forum posts about downgrading from Lion. I was wondering if there's a way to create a "10.6.8 restore DVD," and try booting from that. Shot in the dark perhaps.

I'm trying to loack a document with mac os x 10.6.8 They only have infor. on how to lock it with lion 7.0 on the help button. Can I lock it with snow leopard?

Similar Messages

Maybe you are looking for