I'm trying to port forward Garry's Mod, and it doesn't work

I have 2 ports open through the Airport Utility (27005, 27015) and I'm trying to run a server. I used two different port checkers and they say they're closed. My friend can't join, either. Another program I used was Port Map, which always worked. But now that I'm on Windows 8, I can't forward any port. Any help is appreciated.

In addition to the Flash issue, most sites providing TV shows are restricted to viewers only in that country. From NBC's site, for instance:
Can I watch episodes outside the United States?
At this time, full episodes on NBC.com can only be viewed within the United States and the organized U.S. territories of Guam, Northern Mariana Islands, Puerto Rico and the U.S. Virgin Islands.
They usually block access from outside of the designated country. So Flash or not, you need to look for a provider of Parenthood there in the UK.
Regards.

Similar Messages

  • Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hey lozza567,
    Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Issues with sending and receiving MMS
    You will need these to send and receive MMS:
    - An iPhone 3G or later.
    - iOS 3.1 or later.
    - A cellular data connection. MMS isn't available if you are using only Wi-Fi.
    - A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
    - A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
    To resolve issues with sending and receiving MMS, follow these steps first
    1. Go to Settings and turn airplane mode off.
    2. Go to Settings > Messages and turn MMS Messaging on.
    3. Go to Settings > Cellular and turn Cellular Data on.
    4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
    5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
    6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
    7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
    8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
    9. Restart your iPhone.
    10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    11. Reseat your SIM card.
    If you are still unable to send or receive MMS, follow these steps
    1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
    3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
    4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
    5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
    7. Back up and restore your iPhone as new.
    8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
    9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
    10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
    11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
    Thanks,
    Matt M.

  • I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

    I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

    There is no more LiveType with Motion 5.  You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

  • AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

    AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

    I had a bright house cable modem that also had built-in wi-fi.
    Don't mean to be picky here, but if the "modem" had built in Wi-Fi, it was not a modem. It was a modem/router, also known as a gateway type of device.
    A device like this combines the functions of a separate modem and separate router in one package. Turning off the wireless on a device like this does not make a it modem.....it is still a modem/router or gateway with the WiFi turned off.
    I think that if I have them replace the current "complicated" modem with a "simple" one I should be able to get the guest network up and running.
    That would be correct. Hopefully, they offer this type of option for their customers.

  • I have tried to change my cd visa number and it doesn't work. Advices ?

    Well I am ****** ! I have done what my phone ask and still it doesn't work. I must say this is a first but then I have never had to update my credit card info before either.
    I want to buy something (new effects for a pic app) and then I have to update my credit card number etc... But *** ? iTunes doesn't accept it. It says I have to contact you. The red is expiration date and year which I fully typed 3 times already without any changes.
    Did I mention I was ****** ? Yes I think I did but this really ***** apple, your products are already too expensive for what they are worth but we can't buy effects ? This is really a bad idea. You will get high not good image for such a small problem  

    you are not speaking to Apple, this forum is made up of users like you.  You need to contact Apple directley via iTunes support: https://expresslane.apple.com/Issues.action.  Also, lay off the offensive language, that will get you nowhere with any customer service.

  • I keep trying to take off my credit card and it doesn't work

    i have a credit card on my account and when i try to edit my payment information i just cannot take off my credit card.

    Select None as the payment option.

  • My iPad updated and wants a security code. I tried the one from my phone and it doesn't work - I never entered a security code. How can I get in now?

    ?My iPad updated and now wants a security code for access and I never gave it one. I tried code I used for my phone and it doesn't work. How can I access now?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I tried the single user mode on my Power Mac G5 and still doesn't work

    I also tried the verbose mode and it doesn't work too. PLEASE ANY SUGGESTIONS.

    after use command + s it gives me black background with white text and typed in reboot but my keyboard won't work on it. I did try using command + v same thing my keyboard won't work. My keyboard does work but strangely on this one it doesn't. HELPP!!

  • I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

    I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite.  Please help!

    Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

  • My screensaver seems to be freezing and I can't access Safari. I've tried restarting/shutting down and that doesn't work. Any ideas to help?

    My screensaver seems to be freezing and I can't access Safari. I've tried restarting/shutting down and that doesn't work. Any ideas to help?

    Which OS X is installed on your Mac ?
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
    Troubleshooting advice can depend on that information.

  • I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

    I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

    Likely because it's a not self contained and/or it's game and copy protected, so install it via the developers instructions instead, which likely means it will have ot be uninstalled off the first machine, the developer contacted for a new license key before installing on the newer machine.
    If you want it on both machines, you will need to likely buy another license.
    Most developers are fine with transfering license between machines, you have to contact them.
    They just want to make sure it's only on one machine so they are not getting robbed.

  • Hi could someone help me please ? Ive just bought the new ipad and want to put some movies on it. I have already converted some movies using handbrake and tried to transfer them to my ipad and it just wont work. ive tried drag and drop and everything

    Hi could someone help me please ? Ive just bought the new ipad and want to put some movies on it. I have already converted some movies using handbrake and tried to transfer them to my ipad and it just wont work. ive tried drag and drop and everything

    bluztoo wrote:
    Haven't really used any of them including VLC - actually use netflix on the ipad more than anything. I was able to drop an mp4 into imovie on my ipad and see it there. This was something I had shot as avhcd and converted with turbo.264. Played fine. Probably not what you want for a movie player though.
    Well, turbo.264 is indeed very nice to have - even for converting full-sized movies. (Nevertheless, TechRadar's latest roundup (see http://www.techradar.com/news/software/applications/6-of-the-best-video-converte rs-for-mac-1074303 ; also linked from another roundup at http://www.iphonelife.com/blog/87/benchmark-excellent-multimedia-converter-handb rake-vs-commercial-apps ) has shown it's still worse than HandBrake in most respects.)
    All H.264 files (assuming they are H.264 level 4.1 or lower) are compatible with the built-in Videos app.
    bluztoo wrote:
    Those of you who use other players, what do you reccomend? Just curious.
    It entirely depends on your needs. The top players (AVPlayerHD / ProPlayer, It's Playing, GoodPlayer) all have different strengths and weaknesses. I myself use It's Playing the most as I convert everything into MP4 and simply love the DSP's (brightness / volume / saturation boosting). (Its software decoders are definitely worse than those of AVPlayerHD / ProPlayer; however, MP4's are played back from hardware.)

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1296 When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

    When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

    The music sync is one way - computer to iphone.  The only exception is itunes purchases.  File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.  Use your backup copy to move everything to your new computer.

  • My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger. I tried all troubleshooting steps suggested by Apple but it doesn't work. What could be the problem and what are the solutions?

    My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?

    We can't know if there's a "fixture" because we can't examine your phone.  But Apple can.  Make a Genius Bar appointment and get your phone evaluated.

Maybe you are looking for