I'm trying to print jpegs on my desktop.

I have recently updated my computer from Os X 6 to Os X 8 and I used to print jpegs off my desktop by selecting all the images into a preview bar, and then selecting them all to print.  And then in the print preview options, I could select the number of images per page I wanted and had a check box if I wanted them all of one image or of one of each of the selected images.  I no longer have this feature.  I still have the number of images per page option, but it's only for the same image.  I want to fit 4 different images on one page to save paper. Is there any way I can get back this feature or refind it?

When I select several images to print in Preview, under Layout in the print dialog I can choose to print multiple pages per sheet, each page being a different image. Are you saying you can't do that? If so, please describe exactly the steps needed to reproduce the problem.

Similar Messages

  • Help, i am trying to print my JPEG file that i created in photoshop at a photo lab but it is coming out like an X-ray. I have printed these files before so i have no idea what i am doing wrong.

    Help, i am trying to print my JPEG file that i created in photoshop at a photo lab but it is coming out like an X-ray. I have printed these files before so i have no idea what i am doing wrong.
    Could it be something i have done in my settings?
    or when i am saving the file to JPEG?

    Basically you're approaching this the wrong way around. What you need is the extreme sections to be quieter, not louder. The problem with moving the lower end of the audio is that you'll move the noise floor too, and get what's generally referred to as a 'pumping' effect. So what you do is to use a compressor to tame the peaks, and leave the lower level sound alone. When you've done that, you amplify (or normalize to a level you can determine) the whole signal. So the noise floor will be higher, but constant and not pumping. 'Match Volume' is a completely different tool for setting the overall levels of different tracks so that they sound approximately the same - it doesn't even begin to do what you want.
    If it's music you are treating, then I'd almost certainly use the multiband compressor, because you get less artefacts with this. You need to experiment with the threshold levels, and almost certainly not use a massive compression ratio - 3:1 or 4:1 should be sufficient (although it's hard to tell without actually hearing the audio). You can tell what it's doing at any given point because the downward meter indicates how hard it's working. In theory you can apply make-up gain with it as well, but personally I leave that until everything's treated and use the 'Normalize' tool to set an absolute max level.

  • Trying to print a jpeg (not a photograph).  No matter what setting i select, it prints in landscape.  How do I get portrait printing?

    Trying to print a jpeg (not a photograph) in Elements 12. No matter what setting i select, it prints in landscape. How do I get it to print in portrait?
    Second question.  What is the fastest way to change the number setting (0 to 12) for an existing photo so that the file size is smaller?

    kkbadobe wrote:
    Trying to print a jpeg (not a photograph) in Elements 12. No matter what setting i select, it prints in landscape. How do I get it to print in portrait?
    Second question.  What is the fastest way to change the number setting (0 to 12) for an existing photo so that the file size is smaller?
    Go to File>print in Editor. In the dialog that comes up, you should see "Page Setup". Select "Portrait".
    This assumes that the file is in portrait orientation as well, before sending it to the printer.
    As for question #2, I am unaware of a numeric sequence such as you would like in this program. You can alter file size via File>save for web, however.

  • Crashing when trying to print...

    LR 3.3, Leopard 10.5.8. on a Macbook (w/ boosted memory) and an Epson R1800 inkjet (Europe's Epson 6.57 driver).
    Hundred's of prints w/ this set-up and Saturday I managed the best print I've ever gotten w/ the R1800. Happy as hell!
    Tried to print Sunday and LR crashes. I'd made no changes to the system of any kind. Can work the library and develop modules w/o problem (although I do notice this immediately stresses the Macbook as the fan quickly engages - something I'd not noticed before). I can go to 'file/page set-up' and select printer, paper size, etc. while in the print module and any change in print size will be addressed, but once I hit the 'print' tab LR crashes within a couple seconds. No spinning balls, just crashes and asks if I want to report it.
    Re-booted everything, removed and replaced the Epson driver, selected other printers in 'file/page set-up', and still no go. The R1800 and my 2 other printers all print from any other application, just not LR. Any ideas on how I might pursue resolving this will be greatly appreciated.
    Thanks,
    Todd

    Update:
    Grasping for straws, I opened up my old LR2 to see if I could get it to print. It printed an old jpeg on my Epson w/ no problem.
    Decided to download some pics I had taken yesterday w/ LR3. These downloaded and printed w/ no problem. Went back to the pics that were giving me printing problems, and LR3 crashed again. I roamed around my pic library and randomly chose some other pics of  roughly the same age (couple years old) and all others  would print.
    Seems I have just one batch of some 500 pics (a trip to Italy) that now will not print. I've printed from them in the past. In fact, I've both the original NEF files (Nikon raw) and as well as jpeg copies of each that were used to have an Apple book printed, but can now not print either type.
    If it makes any difference, I keep all my pics on an external HD. Another external HD backs-up my Macbook and my pic HD via Mac's 'time machine'. I can go right to the specific pics on the external HD and see that they're right there were they should be, but I can just no longer get them to print.
    Any ideas?

  • G5, 10.6.8, trying to print biz cards, instead of clear print with sharp edges I get fuzzy print with pixels showing. Saving as PDF doesn't help. Any solution?

    G5, 10.6.8, trying to print biz cards, instead of clear print with sharp edges I get fuzzy print with pixels showing. Saving as PDF doesn't help. Any solution?

    Mac OS X Version 10.6.8, iMac12,1
    .cwk (Appleworks)
    Kodak Easyshare 5100
    If I paste the jpeg on a draw page and shrink it to fit, fuzzy print. If I create the text directly on a draw page, it's fine. (That suggests to me the problem isn't in the printer.) But I want to include a small drawing on the card, and the pasted jpeg of that small drawing is very poor quality.

  • I'm trying to print a pdf I created and posted on my website, it looks good online but is missing data when printed, help.

    I'm trying to print a poster I created and posted on my website, it was created in power point, saved as pdf, and uploaded using wordpress. It looks good online but is missing data when printed. It contains almost all the information except for about 6 lines, which happen to be important. Any thought are appreciated.

    No its weird, everything was the same. I sort of resolved it, since he can view the PDF fine on his comupter but also wanted to print it, I just exported all the slides as JPEGS and made a new InDesign book with those on the pages and exported that as a PDF. Seemed to work for him, I just don't know what happened!

  • Ihave an ipad and an epson nx430 printer.  I tried to print my airline itinerary  and it printer 4 pages that was mostly ads.  How can i print just the itinerary which fits on oneage?

    I have an ipad2 and an epson nx430 printer.  I tried to print my airline itinerary  and it printer 4 pages ,most ofwhich were ads. How can i focus just on the information that i need?

    Does the website you're using offer a "printer freindly" button or perhaps the faciltiy to email the intenerary to yourself?
    Matt

  • When trying to print to PDF from a sales program we use it keeps throwing errors

    When several people try to print to PDF from MAS90, it will save it and create a file as it normally does. However, it does not open in Acrobat 9 Pro as it normally does, and displays the famous error "Acrobat could not open 'xxxx.pdf' because it is either not a supported..."  Yet when you manually open the file from the file system, it opens just fine.
    So to rehash what I just said, when I print to pdf, it asks me where to save, the notification said the printing completed, adobe opens and displays error. If you click on the file, then the file opens just fine.
    However several other people do not have this error while trying to print to file from mas90. Does anyone out there have any idea what could possibly be causing this error to be displayed?

    Hi ftd12300,
    Are you saving the PDFs you're creating to a network drive or are they being saved locally? 
    Do you have this problem when creating PDFs from other applications such as Notepad?
    -David

  • Freezing when trying to print out PDF?

    Trying to print out PDF of Aperture 'book'. Each time it freezes on the same page ... this particular page is where I have one image stretched across two pages. Is this possibly a glitch with Aperture?
    Ben
    I've trashed my preferences several times; doesn't seem to help. I've also tried to use two copies of the same picture (right half on right page, left half on left page); but that doesn't work too well, as Aperture seems to want to favor one side or the other – and thus I can't adjust the two sides to match up properly.
    Any suggestions would be most appreciated, thank you,
    Ben

    Hi Allen,
    I'm all topped up, big graphics card, latest ver. of Tiger, permissions repaired every day or so. The mystery continues.
    I love the IDEA of the two page spread. Have longed for it in Pages, where I'm producing a whole series of books ... a lot of two page spreads (but done by using two versions of the same still).
    Thanks,
    Ben

  • After downloading Yosemite, my HP Photosmart D110 printer will no longer work. The wireless connection is fine but says it cannot find my printer when trying to print.

    After downloading Yosemite my printer, a HP Photosmart D100 will no longer print. The wireless connection is fine, and a test page printed perfectly directly from my printer. When trying to print from my computer, it says it cannot connect or find the printer. I tried downloading the most updated software from HP website but it doesn't appear to be helping.

    Try resetting the printing system.
    OS X Mavericks: Reset the printing system
    If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
    Network Printer Troubleshooting
    HP – Wireless Printing Center
    HP – Printer Not Found During Wireless Installation

  • I am trying to print from my iphone to my LEXMARK printer. When I select the select printer option when trying to set it up, it does not find my printer??? i dont know what to do at this point. Maybe it does not have the capability? it is a year old???

    Hello!  I am trying to print from my iphone 4 to my LEXMARK printer. When trying to select my printer in my phone it comes up and says that there are no printers available... I dont know what to do at this point. Can someone PLEASE HELP???
    I also cant get my music I have purchased, to become my ringtone???????
    Thank you so much,
    Michael

    What's the model number of your Lexmark printer?

  • I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi

    I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi. Can anyone tell me what I am doing wrong?

    Hi,
    If you are trying to utilize AirPrint you need an HP compatible printer listed here.
    http://www.apple.com/ipad/features/airprint.html
    Scroll down.
    Carolyn  

  • Message of "printer offline" when trying to print

    Hello,
    I have iphone 4s and a HP wireless printer a little less than 3 years old.  When trying to print something from my iphone, it keeps giving me the message "printer offline" with choices for continue or cancel.  I hit continue, but same message comes up a minute or two later.  This happens even when my printer is awake and wirelss signal is strong.  My phone finds the printer when i try to print, but keep getting this printer offline message.  Any help would be appreciated.

    Is your particular printer model AirPrint compatible?  Here's the list, as well as guidnance for setup and use:
    http://support.apple.com/kb/HT4356
    If your HP printer is not one of those on the HP list, then you wiould need some othe app to print from your iPhone.  Search the App Store.

  • I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black.  My printer guy has been in and checked it out top to bottom and that part is fine.  I have tried to print the same docum

    I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black.  My printer guy has been in and checked it out top to bottom and that part is fine.  I have tried to print the same document and it comes out fine.  Any ideas ?   Using Windows 7 Service Pack 1

    Sorry my bad.  I have tried to print the same document on another printer and all the formatting is fine. 

  • I am trying to print a booklet.  I have printed it several times without issue.  Now when I print, it gives me one blank page or else 2 out of my 8 pages?

    I am trying to print a booklet.  I have printed it several times with no issues.  Now when I try to print it (with no changes in the program) it will either give me a blank page or will print one of my pages (there are 8 pages total). Any help?

    No I didn't even read through your post, to long.
    You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
    Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
    Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

Maybe you are looking for

  • ALV Report output as per selection screen

    Hi, I got a requirement. In selection screen there is field where i can entered 1 to 12 numbers. When i entered a number,  so that in output of an alv report should display that many fields for eg. if  i entered 5 in selection screen in out put 5 fie

  • Help needed deleting corrupted file

    G'day, I have a corrupted file on my hard disk. It is a Vault backup file created by Aperture. Whenever I do anything with the file (e.g., try to unlock it, try to view info, try to open it), the o/s immediately tells me that I have to manually turn

  • Applications won't open after error in a update using a Apple G4

    Apple G4 wont open applications, it says application switcher error or error type 3, everthing used to work until when updating the mac a error accured it restarted, now it won't open an application without saying error type 3, or when it boots a bom

  • Operation Name part of request XML

    Hi, In weblogic 10.3, We have created a web service from the WSDL. All is OK but the problem that we are facing is that the request XML has the request object encapsulated within the transaction Name tag. For example, if the operation name is getNume

  • 10.4.9 compatability problems

    After loading 10.4.9 upgrade into my G5 iMac, Adobe Photoshop Elements 3 and Arc Soft Photoimpression 5 stopped working. Software can be re-loaded but will not operate on computer anymore. I called Apple today and they claim no known problems with co