I'm trying to purchase printable ITunes cards -- which I've done in the past...no problem. Now a message reads: this Apple ID does not support this purchase....or something to that effect. What do I do?
I'm trying to purchase printable ITunes cards -- which I've done in the past...no problem. Now a message reads: this Apple ID does not support this purchase....or something to that effect. What do I do?
First of all, I think you are confused by something.
You don't print cards. You print Certificates. So which item are we dealing with here first of all?
Also, you can't buy gifts with just Store Credit, so do you have a linked CC?
Similar Messages
-
I can't use my iTunes card which I have 30 in the account i last used a credit card and I can't switch out of it
If you have an iTunes credit, any purchases will be processed against that credit first.
Cheers,
GB -
"iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?
only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0
-
Hi
anyone there
I want to down load adobe flash player to my I pad but a massage show up saying Safari does not support this ?
Anyone there?No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
Apps that can display some Flash from the Web:
Puffin
SkyFire
Photon Flash
Browse2Go
iSwifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that." -
"this apple ID was not used to purchase OSX Lion"
Have the late 2009 imac (21.5" with 4GB and 500GB HD) and was running OSX Lion 10.7.5. This is my kids' computer and the hard drive was pretty much full up of junk. So I wiped the hard drive and began the process to reinstall OSX Lion using the original installation DVD that came with the computer when I purchased it. Goes through all the steps to install and then asks me to login with Apple ID and comes back with "This Apple ID was not used to purchase OSX Lion" Well, of course I purchased it. It came with the computer. It is the only installation disk I have. Talked to Apple support, tried different solutions with them. They even sent another disk. Same message.
Perchance, was there a USB Thumbdrive version Lion 10.7 included with the computer
when it was new? If you had that, (as the computer likely shipped with 10.7 installed only
if it had a backup installer) then you could install from there.
If the computer has an internal optical drive, there should have been grey-label install
restore media discs (DVD specific to that model build) with applications & OS X on it.
Such an original DVD disc set would also have an Apple Hardware Test on DVD.
The 10.7 Thumbdrive version was offered on a limited basis, no longer available, at $69.
Per the MacTracker database, the only model shown which shipped with 10.7 installed
and also had an optical superdrive, was the iMac (21.5, Late 2011) model. Earlier model
versions show the shipped OS X on media (DVD) as being OS X 10.6.x Snow Leopard.
Avoid Mavericks if you have/possess older software that you would be using regularly.
There may also be a firmware update that could make it hard to revert to the original
OS X version if the Mavericks is installed on certain models that supported it later.
Good luck & happy computing! -
Question
delta.edu patially hides behind home page until I CLICK ON it and its the only site that does this, other computer does not do this. i see .25 of ther home page.Did you disable all the extensions before restarting?
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
In Firefox Safe mode these changes are effective:
*all extensions are disabled
*the default theme is used (no persona)
*userChrome.css and userContent.css are ignored
*the default toolbar layout is used (localstore-safe.rdf)
*the Javascript JIT compiler is disabled
*hardware acceleration is disabled
*plugins are not affected
*preferences are not affected -
Error when trying to re-mount a VHDx (the version does not support this version of the file format)
Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
MaikeHi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway! -
i bought a new iPod nano 6th generation and when i am trying to sync it with iTunes its saying "the iPod software update server could not be contacted. the server does not support this version of itunes" cn any one help me how to set the thing right.
Regards,
Brahma.You need to update to the latest version of iTunes. Go to the apple and select software update.
i -
TS2634 I am trying to connect my camera through a USB and it says it does not support this device
I just bought the USB connector for mynipadbandntried to connect my camera but it comes up does not support this device. What do I need to do in order to connect my camera ?
What model camera?
Cheers, Tom -
Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.
Try a reset:
- Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
If issue persists try:
- Another known working cable
- Check the charging port for any damage or debris
- You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there -
When I click safari on my iMac it says my toolbar does not support this. What is the issue?
My safari won't open. When I click it, the message says the toolbar does not support this. How can I fix safari?
You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
If the instructions don't work, proceed as follows.
Triple-click the line below on this page to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with this line:
/Applications/Toolbars
Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.
I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site. -
can anyone help when i try to connect my iphone4 to sync with imac g5 i get a message stating my iphone cannot be used as it requires itunes version 10.6.3 or later when ive tried to download this on my imac it says it does not support it.
All i want to do is sync my iphone 4 with my imac g5 can anyone helpClick here and download the software. Unless otherwise noted, a device running iOS 6 requires at least Mac OS X 10.5.8 and iTunes 10.6.3 to be synced from a Mac.
(78390) -
I tried to add an older airport express to my network that I had not been using. It shows up in Airport Utility but Airport Utility says that this version of Airport Utility Dies not support this base station. I am running airport utility V6.3.4 on a mac mini running OS X 10.10. Not sure which airport express it is, nor how to check. I assume I need a firmware upgrade on the Airport Express, but not sure how to do this without Airport Utility. I tried to download an older version of Airport Utility, but could not install because it does not support OS X 10.10 Any ideas other than throwing a perfectly good airport express away?
Don't throw the AE away. It is still very useful as I have both the old & new each work well (sometimes the sound keeps dropping out but I think that has to do with the wirless settings!!!)
You need Airport Utility 5.6.1 which works in 10.10 - I managed to download a .dmg from the net but not sure how I could get it to you.
The new utility doesn't support the old AEs unfortunately which I have and Apple have no intention of allowing a utility that will cover all
AEs.
Try and get a version 5.6.1. -
i keep getting an error message and i know its to do with firefox but have also gone into one of the settings and it says the following retail.santander.co.uk : server does not support RFC 5746, see CVE-2009-3555 but not what to do now??
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Error_loading_websites
The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers and visitors like you can ignore that warning.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation -
My Mac OS X (with 10.6.8 software) Mail 4.6 sends emails that other email clients don’t recognize as attachments, but as embedded pictures. When I receive emails from others, I do not see whole image either. I did change "rich text" to "plain text" in message format - no results.
My daughter has Mac (10.8.5) with Mail 6.6, which does not have this problem. Can I install 6.6 instead of 4.6 or do you know other fix?
Help, please?
Thanks,
AndrewI've been having the same problem now for several months (at least 3-4 if not more). And the frequency of Mail quitting is increasing, several times in a few hours. And as with you, no particular message pops up before hand or not even the beach-ball spinning first and then quitting.
I too have been sending Apple the crash reports. However, I have not contacted Apple Support yet. Hoping to find the answer in this forum, but again, no luck.
If you have found a solution since then, please advise. Or if anyone else out there knows of this issue and can help, that would be greatly appreciated.
Maybe you are looking for
-
How to include the URL in the name of the print job when printing from FF
We log all print activity in our company and it would be helpful to be able to identify print jobs from Firefox, however as only a web page's <TITLE> content is used as the print job name, I was wondering if there was a way to either use the URL as t
-
Hello: I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 108
-
Total Compensation Statement Configuration (ESS)
Hello, does anyone know where do I have to go in ERP 2004 to configure "Total Compensation Statement"? I've created a new form in Smart Forms and now I want to change the default form used in the Portal. Thanks a lot Antonio
-
Hi, I have a request from a user to add the reference key 1 field (XREF1) into the details tab of the MIRO header screen. Does anyone know how this can be done? I know that this can be done using posting keys for accounting documents, but I can see n
-
What references are required to access ..i
Hi Curt, I want to add that from the list of references I used in previous correspondence , NIDAQmxCAPI , IF i AM CORRECT IS RELEVANT.mAYBE THER'S ANOTHER ONE NOT ON THE LIST?Please let me know. yours jeff