I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

QuickTime version 10 can only record the entire screen.
10.1, 10.2 and 10.3 offer part of the screen recording.

Similar Messages

  • I'm applying for jobs online through my iPad using the safari app. For some reason when I try to attach my resume, which I have saved in Pages, it does not give me an option to go to Pages. It only gives my an option to choose a file from photos. Does it

    I’m applying for jobs online through my iPad using the safari app. For
    some reason when I try to attach my resume, which I have saved in
    Pages, it does not give me an option to go to Pages. It only gives
    my an option to choose a file from photos. Does it not have the
    capability to choose a location other than photos??

    No. Safari does not have the option to attach files for uploading other than photos.
    Look at iCab Mobile in the App Store. There are other browsers that may do this, but I'm pretty sure that iCab will fill the need.
    iCab Mobile (Web Browser) on the App Store on iTunes
    take a look at this.
    http://www.icab-mobile.de/faq.html

  • In my opinion, the real solution is for Apple to offer us a choice of the photo sort order in ITunes. My preference would be filename, perhaps with options to choose the Date Taken attribute, file timestamp or date modified filestamp (EXIF date fields as

    I tryed to sort my pictures with buying Apps and following suggestion from apple, but without any success. In my opinion, the real solution is for Apple to offer us a choice of the photo sort order in ITunes. My preference would be filename, perhaps with options to choose the Date Taken attribute, file timestamp or date modified filestamp.

    Not a problem when using iPhoto on a Mac, which the transfer of photos is primarily based on - not manually managing photo storage as seems to be common with Windoze.
    The same should be available with a supported photo management app on a PC.
    http://support.apple.com/kb/HT4221

  • The new iTunes update gives me no option for a "share" tab on the side bar for me to play home shared music. why? please help i need to listen to beyonce!! plzzz

    The new iTunes update gives me no option for a "share" tab on the side bar for me to play home shared music. why? please help i need to listen to beyonce!! plzzz

    "share tab on the side bar ..."
    iTunes has not had a sidebar for over a year.  You can see one (as iTunes 10 used to show) by doing View > Show Sidebar from iTunes' menu.
    But I'm not sure if that is your issue.  You do not need a sidebar to do home sharing.  Are you running the current iTunes (11.1.3)?  Have you turned on sharing in Preferences?   Have you done File > Turn on Home Sharing?

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • Hello all,  I bought an iPhone 5 in the US and brought it back to Brasil. Now I'm trying to use Siri, but once I press the "home" button "voice control" appears and it only works for me to call my contacts. The manual guide tells me to go to Settings Gene

    Hello all,
    I bought an iPhone 5 in the US and brought it back to Brasil. Now I'm trying to use Siri, but once I press the "home" button "voice control" appears and it only works for me to call my contacts. The manual guide tells me to go to Settings>General>Siri. At the General menu "Siri" doesn't appear. What should I do to set Siri up if it doesn't appear at settings>general?
    Thank you,
    Melanie.

    Go to Settings>General>Restrictions and make sure Siri is set to On.

  • HT201269 When restoring my backup from my old iphone via my computer to my new iphone, it gets all the way through the restore and then at the end it says there was an error and doesn't restore. Doesn't say what error.

    When restoring my backup from my old iphone via my computer to my new iphone, it gets all the way through the restore and then at the end it says there was an error and doesn't restore. Doesn't say what error.

    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Also... See Here  >  Configure security software

  • Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    This is a user to user forum.  Apple isn't here and won't answer you.  You need to contact Apple directly.  You can use the Contact button at the bottom of the screen.

  • I just recently got a new iPhone 4 and the service is all of a sudden terrible and my calls are dropped constantly. This has never happened before. Any suggestions on what I can do? This is really frustrating!

    i just recently got a new iPhone 4 (my other one had water damage) and the service is all of a sudden terrible and my calls are dropped constantly. This has never happened before. Any suggestions on what I can do? This is really frustrating!

    May be your carrier but try a reset:
    Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears

  • My ipod only connects to the wifi when i am in the room of the router. as soon as i go out of the room into some other room it disconnects and doesn't connect again. unless i go to the room of the router. i have an ipod 4 with ios 6.1.6

    my ipod only connects to the wifi when i am in the room of the router. as soon as i go out of the room into some other room it disconnects and doesn't connect again. unless i go to the room of the router. i have an ipod 4 with ios 6.1.6

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now have this problem?
    Did the iPod stay connected before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Could be a loose antenna connectin
    http://www.ifixit.com/Guide/iPod+Touch+4th+Generation+Wi-Fi+Antenna+Replacement/ 3640
    Apple Retail Store - Genius Bar

  • Does anyone maybe know why the new Macbook pros don't have iWeb and how i can install it. My Macbook already came with the iLife thing, but it seems to only have iMovie, iPhoto and Garage Band. is there any way that i can install iWeb?

    Does anyone maybe know why the new Macbook pros don't have iWeb and how i can install it. My Macbook already came with the iLife thing, but it seems to only have iMovie, iPhoto and Garage Band. is there any way that i can install iWeb?

    Apple discontinued iWeb. That's the case for over a year now.
    Topics in this forum will tell you that in order to install iWeb you have to find a copy at eBay, Amazon and similar places.
    Or here

  • How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and onl

    How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Automatically start recording a meeting

    Prompt and no other solution except autorecord pod to automatically start recording a meeting? via the AP can be done?

    Well the great thing about Connect is if it doesn't do what you want/need, chances are it can be customized to meet that need. I would recommend you reach out to Refineddata about their auto record pod and the possibility of modifying it to auto record upon your conditions. You can reach them at [email protected]
    Alternatively, should you want to do it yourself, you can use the Collaboration Builder SDK and build your own custom pod that does whatever you want. The SDK can be found here, Adobe Connect | Adobe Developer Connection.
    No tool can meet the needs of everyone, but only Connect can be customized to best fit the needs outside of its factory functions.

  • Distiller 'default settings' blank and doesn't show all job options

    We're experiencing a problem with Adobe Distiller 9.3.0 being blank next to "Default Settings" with the error, "Error in /Library/Application Support/Adobe/Adobe PDF/Settings/PDFX4 2008.joboptions: /CheckCompliance out of range".
    I can delete that joboptions file, which removes the error message, but the Default Settings pulldown menu still is blank and doesn't show all of the joboptions files that it should.  Only 2 of them are showing up in the pulldown.
    How can I fix this?
    I've tried deleting all joboptions files and letting Adobe self repair them and have tried deleting a few com.adobe.distiller* preference files and nothing yet seems to work.
    Thanks!

    I am connected to a network but we don't share applications. CS5 Design Premium is installed on my machine.
    See screenshot below:
    What is the relevance of this? We seem to have the same location for the output module file.
    Why does mine not work?
    See screenshot below:
    The Adobe Output Module is in my Startup Scripts but it still doesn't work.

  • If I have the creative cloud package which has Photoshop, Indesign and Illustrator CS6, do I have to pay to again to get the CC 2014 version?

    If I have the creative cloud package which has Photoshop, Indesign and Illustrator CS6, do I have to pay to again to get the CC 2014 version?

    It really depends on which subscription plan you are signed up to.  Normally whichever programs are available thru your subscription are listed for you to install in the CC desktop manager application.  If you do not see certain programs listed it might be because your machine does not meet the system requirements for them... that is normally what happens with the manager.

Maybe you are looking for

  • Itunes 12 can't import shared home movie to iTunes library

    HI. I am trying to import, or add to my desktop iTunes library, a shared home movie. I have file sharing turned on with both my laptop and desktop. I can see, from my desktop, the shared home movies, and I can even play them, but I cannot find an opt

  • How to I insert a line of best fit on a scatter plot????

    I have data already organized in tables, and I created a scatter plot. NOw I need to insert a line of best fit and get the equation. How do I do this??? I already calculated a and b (for y=a+bx) but I have no idea how to insert it on the plot. Every

  • DOCKING STATION NO LONGER SUPPORTED since 7.06

    I think people can be forgiven that Apple have a secret agenda when things like this happen. OK my Logitek Dock and player didn't cost hundreds and hundreds but cost enough and now both my I-Phone 4S and Ipad2 will not play music. I am getting the me

  • Motion 3.01 Crashing and crashing...

    I spend a lot of $$$ Buying Final Cut Studio 2. I spend a lot of $$$ Buying a new Macbook Pro. I cannot use Motion 3. Unless... I reinstall my OS X and my Final Cut Studio, because Apple says that Motion 3 is incompatible with Macbook Pro Software Up

  • Widening casting

    Hi, I am a debutant in ABAP OO. I am trying to understand the concept of Widening casting with lots of example found in SDN, but still I can't come to any conclusion on this. Well I understood from one of the example that , before doing the widening