I'm trying to restore in disk utility and i get Error (22)

I have a sparse.image file that i wanted to retore to another sparse.image file and I put them on the restore line then hit
restore. Over half way through this it brings this up: an error 22 occurred while copying. invalid argument

17    dsNoPackErr     package 0 not present [List Manager]
18    dsNoPk1         package 1 not present [Reserved by Apple]
19    dsNoPk2         package 2 not present [Disk Initialization]
20    dsNoPk3         package 3 not present [Standard File]
21    dsNoPk4         package 4 not present [Floating-Point Arithmetic]
22    dsNoPk5         package 5 not present [Transcendental Functions]
23    dsNoPk6         package 6 not present [International Utilities]
24    dsNoPk7         package 7 not present [Binary/Decimal Conversion]

Similar Messages

  • TS3694 trying to restor my ipad 2 and am gettingunkown error (2)

    hi trying to restor my i pad and keep getting unknown error (2)

    This probably relates to security software problems on your computer.
    See here: http://support.apple.com/kb/ts3694#error2

  • HT201210 I,m trying to restore my phone but I keep getting Error code 21.... help please

    I,m trying to restore my phone but I keep getting Error code 21.... help please     iPhone 4S

    Take a look at this Apple doc -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    You could just update or uninstall the security software on your computer and then test again.

  • Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks

    Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks

    LaCie doesnt make ANYTHING.  It contains a Seagate 3.5" 5400RPM HD.
    Check the HD on another computer, if nothing, your SATA bridge is fried, or the HD (very unlikely since its a Seagate inside)
    Youd have to crack open the HD, remove the SATA bridge cart thats plugged into the HD and put the HD into an enclosure or a HD dock to get the data
    those external HD use a 50 cent SATA bridge famous for failing.  The curse of all the good HD externals is the junk 3rd party SATA bridges attached to them that crash and burn.
    Sata bridge:

  • HT201210 trying to restore software on an iphone, however getting error msg (-1) mid-way through restoring. Any ideas please.

    trying to restore software on an iphone, however getting error msg (-1) mid-way through restoring. Any ideas please.

    Error -1 indicated a hardware failure.  You can try restoring a couple more times, but it probably won't work.  You'll need to bring your phone to Apple.

  • TS3694 I am trying to restore my iphone 4s and i get an error message 21,can u help pls

    II am trying to restore my iphone 4s and i get an error message 21,can u help pls

    gregoryfromnzl wrote:
    i get an error message 21,
    See here >  http://support.apple.com/kb/TS3694#hardware

  • I am trying to download itunes 10.7 and keep getting "error writing to file C\config.msi\6f8a6.rbf.  Can anyone help?

    I am trying to download itunes 10.7 and keep getting "error writing to file C\config.msi\6f8a6.rbf"  Can anyone help?

    Are you running Kaspersky security software on that PC? (There's been a few reports in recent times of Kaspersky interfering with iTunes installs, with that message being produced.)
    If there is Kaspersky on board, we should try some general-principles getting-past-security-software-interference troubleshooting.
    Download and save a fresh copy of the iTunesSetup.exe (32-bit installer file) or iTunes64Setup.exe to your Hard drive. (Don't run the install on line, and don't start the install just yet.)
    http://www.apple.com/itunes/download/
    Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
    Now start the install by doubleclicking the iTunesSetup.exe (or iTunes64Setup.exe) file you downloaded earlier.
    Reenable all security software prior to reconnecting to your network and/or the internet.
    Any better luck with the security software shut down?

  • TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable

    TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable

    Error opening installation log file | Windows

  • Trying to re install PSE 11 and keep getting error while installing Shared Technologies

    Trying to re install PSE 11 and keep getting error while installing Shared Technologies

    Try this link first:
    <Install rollback and Shared Technologies | Windows>
    It is for the Windows system but if you are using Apple MAC then you'll have to wait until Barbara is here later today.

  • Leopard Disk Utility and Input/Output error messages.

    This post is describing a problem I had and how I managed to fix it. When I was researching the Input/Output error message I was getting a couple of people had mentioned this fix on the apple discussion boards, so I thought I would add my fix to support them. (Isn't google fab!) I've no idea if this is the right place for this so please bear with me.
    Okay a bit of background:- over christmas we treated ourselves to leopard and as my laptop is now three years old I decided to do a complete reformat and installation. I used my 60GB iPod as an external harddrive and backed everything up. Installed Leopard no probs and was a very happy bunny.
    The problem:- I then wanted to remove everything off my iPod. So I thought "I know I'll use Disk Utility".... I tried it with the 'default' setting and got an Input/Output error message straight away (irrespective of whether I did it as an extended journal or not.) When I tried it with the Zero Out option (can't remember exactly what it's called) it came up with the Input/Output error message right at the very end. Argh! iTunes and Finder no longer recognised it, but Disk Utility did.
    My research:- After using google I saw some guys on here talking about formatting proper external harddrives using leopards disk utility and they were getting the same messages as me. It turns out it is a fault with Leopards Disk Utility. So I did what the guys recommended.
    The solution:- (Thank god I had tiger!) I put in my tiger installation disk, clicked 'install tiger' and restarted the laptop. I clicked my my language, but then rather than going through the actual installation process I went to the top menu bars and chose Disk Utility (using tiger's disk one rather than my laptop's leopard one.) And erased the iPod there. Now when I quit the installation and opened my laptop up properly it worked, both iTunes and finder could see it!!! (I just had to restore my ipod in itunes - and now I'm happily transferring all my music back!)
    I hope this helps someone in the same position as me!

    I took it to work to use my Windows PC to try and format the drive, but got the same problem. I figured either the drive (it's a 2.5" that used to be inside my AlBook) or the external housing it lives is was faulty. Only way I could test without spending more money is by putting the 2.5" drive inside my powerbook, and booting the (Ti) powerbook from a bootable firewire ipod. I successfully booted from the ipod, and had the same problem with the now internal drive: only visible in disk utility, any attempt to erase fails. Also, I plugged the small 10 GB drive that WAS in the TiBook (but which I removed to put the other, problematic drive in) into the external housing, and it connected to other machines just fine.
    Turns out the problem is the hard drive itself.
    So now my question becomes: If disk utility can see the hard disk when it is connected (I have it back in the external enclosure now), but gives "input/output error" messages when I try to erase/format it, is there any way I can salvage this drive? It's an 80 GB drive, and I was looking forward to making it my internal TiBook drive (replacing the old 10 GB drive that's in there now).

  • Just tried to install update to iTunes and keep getting error statements. The errors statements read: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114) and Runtime error - Program: C\Program files (x86)\iTunes\iTun

    I just tried to install the iTunes update 11.4.1 and keep getting error messages.  I have never had this issue before over many years of using iTunes and getting updates to the software.  I have removed the iTunes from my computer and reinstalled it but keep getting the errors.  Here are the error statements: "Runtime error: Program: C:\Program Files(x86)\iTunes\iTunes.exe; R6034; An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team.  iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)

    Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin

  • I'm trying to sync my iPhone 5 and keep getting error message "Device is timed out", can anyone help me please?

    I'm trying to sync my iphone 5s with itunes and keep getting error message "Device is timed out", can anyone help me please?

    Try here first:
    iTunes: Error 13019 during sync
    Then here:
    Help Unknown Error 13019 (Updated)

  • Disk icon won't drag when trying to restore in disk utility

    Hello
    Not sure what I'm doing wrong but when trying to back up my (original) Macbook Pro onto an external hard drive (to create a bootable backup) the MBP disk icon won't drag into the Source of Disk Utility Restore....
    Have booted from the MBP disk etc. Am running Tiger w/latest software update. Tried using a mouse rather than the touchpad, but no luck either...
    Any suggestions?
    Many thanks.

    Disk Utility is not very prolix when it comes to error handling. Try this:
    Start "Utilities -> Terminal App"
    in terminal start:
    "/Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility"
    the normal disk utility comes up. Try what you want to do - and check for error messages on the command line. maybe you can correct the problem.
    -------------- IF THAT FAILS AND YOU WANT TO RESTORE IT BY HAND:
    use the disk utility to
    1. mount your target drive
    - double click on the target drive - make sure it's mounted
    2. get information about target drive
    - click the PARTITION (not disk) you want to restore
    - click INFO. Note the Disk Identifier e.g. disk0s2
    3. mount your source image
    - go to 'restore' of some drive. select image
    - search for the image to restore
    - image comes up in list on the left. double click it
    close the disk utility.
    open Terminal.
    check with 'ls /Volumes/' which Volumes are mounted. Check which Volume is your SOURCE.
    you can use 'asr' to restore your drive e.G.:
    asr restore --source "/Volumes/Mac HD" --target /dev/disk0s2 --erase
    PLEASE MAKE SURE THAT YOU GIVE THE CORRECT SOURCE AND ESPECIALLY TARGET!
    asr is the restore tool used by disk utility. Be sure to have a second backup of all your data. If you use it in the wrong way, you can delete all data (including the backup attached via USB).

  • How can I reformat my hard drive if erase and partition don't work in disk utility and I get an error when I try to erase and install from the Leopard install disk?  I have had several kernel panics, but the volume shows up in startup disk.

    I have had several kernel panics on my iBook G4; the panic message shows up just after the desktop appears. Although the startup volume shows up in Startup Disk, the installation disk reports an error when I attempt an erase and install. Disk utility is unable either to erase or partition the hard drive. The hard drive shows up in disk utility, but the startup volume doesn’t  HELP!!!

    Do you have the original system discs that came with the iBook when it was new?
    Which exact iBook model is it?
    You can choose from this list:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    Erasing the disc and installing Mac OS X 10.5 will result in loss of the other applications (such as the iLife applications) which came pre-installed on the iBook.

  • HT201210 I have an old i phone 3G and do not know the password for it. trying to restore it from itunes but keep getting error code 1015, any help on how to get passed this please?

    I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?

    Hi ratcat14!
    I have an article that can help you troubleshoot this issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

Maybe you are looking for

  • After upgrading to 8.1 in windows, my ipod is not recognized in computer or itunes

    I upgraded to Windows 8.1 a while back, and just tried to synch my ipod with itunes and now my ipod is not being recognized in my comuper or itunes. Does anyone know why this is and/or how to fix it? Thanks!! Amber

  • Issue with MacBook Pro Display

    My buddy has a 13" Macbook Pro unibody and recently whenever he puts it to sleep and then goes to open the screen again the backlight for the keyboard comes on but the display does not show up. In order to fix it he has to close the lid and then open

  • I need a bapi  for service order

    i need a bapi for serviceorders  the fields which i required in the output should be  GLTRI(Actual finish date), FTRMP(Planned release date), RMANR(     SD Document Number), POSNV_RMA(Item number of the SD document), PM_OBJTY, ARBPL.

  • Displaying Plant as F4 option in the selection screen according to the User Authorization

    Hi all, In the selection screen, I need to display the list of plants as F4 search help that the user has authorization. How I need to check from the table. Please provide me the exact table name where I can get the list of plants that the user has a

  • WaveBurner - invalid field in cdb

    I have been using logic for years and have never had this problem with Waveburner.  I went to burn a copy of a master, the only difference in it and earlier copies is I was adding the ISRC. When trying to burn I got this message: "Disk drive didn't r