I'm trying to run a scheduled task as system, but it will not run my powershell script

I have a powershell script I created that uses credentials within the script to connect to a network resource to copy files every night. It works fine if I just run the script manually. but I need to run this as a scheduled task, preferably as system. I
have checked "run with highest privileges" still no luck.
If I change the user to my account it works fine, but I need it to work without the use of my account. Is this some kind of security policy problem or what would cause this? I figure having the credentials within the script would work, but not so much.
Paul Arbogast

Similar Messages

I'm trying to sync Outlook calendar (office 2010?win 8) with my iphone 4s. All works well when running control panel manually but it will not run automatically after that. Anyone got any ideas

I'm trying to sync outlook calendar and contacts via icloud control panel. Everything works when control panel is run manually but it will not run automatically after that. Anyone got any ideas

I am having a very similar problem. Until 12 hours ago, I was using my recently replaced 4s (with iOS7) flawlessly, receiving emails and calendar info from Exchange (Outlook 2010). But starting last night, it all stopped. I have deleted and added the account several times, tried making simple changes (considering whether the username is case sensitive, or not, etc.) and cannot fix it. I have iOS 7.04. Interestingly, the first time I changed the case to lower case, it seemed to respond immediately, and downloaded many emails with no sender, no content, and with a 12/31/69 date. Yes, 1969. And then nothing happened. Help please!

I have tried to install the upgrade to iTunes on my Windows XP system. It tells me that I have an older version of Bonjour on my system and that it can not remove it. I have also tried to uninstall what is on my system and it will not uninstall! Help?

I have an older version of iTunes on my system. I have tried to install the upgrade and it talls me that I have an older version of Bonjour and that it can not remove it. I have also tried to uninstall what is on my system and it will not do it. Help?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

Have installed elements 13 from a disk. Can run editor but organizor will not run

Have installed Elements 13 from a disk. Can run editor but organizer will not run. Have been trying to contact someone for help for an hour please help.

Hi,
Please follow the instructions mentioned in the article Elements Organizer crashes at launch and see if it helps.
Thanks,
Anwesha

Downloaded safari 6.0.4 but it will not run on 10.6.8 on

I downloaded safair 6.0.4 to a macbook running 10.6.8 but Safari will not run the new verstion, only the 5.9.1??

For 10.6.8 you need Safari 5.1.10.
Ideally, you'd now install a system backup made before you got 6.0.4 on there... if that's not possible, download Safari 5.1.10 for Snow Leopard & use Pacifist to 'force' the install, then restart. Backup first, if you haven't already.

I have put Netflix on my Macbook Pro but Silverlight will not run. I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.

I have put Netflix on my Macbook Pro but Silverlight will not run.I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.I can use Netflix straming thru my Blueray on my TV but it will not run on my Pro. Thanks

Try running Safari in 32 bit mode. In get info box for Safari,
check open in 32 bit mode. There have been some oddities
on some systems that can cause some issues.
I had thought MS had fixed this, but may not have.

I tried to restore my iphone to factory settings but it will not load. In itunes it says "veryfing iphone software" what can i do?

I tried to restore my iPhone to factory settings but it will not load anymore, it stopped at about 60% and in itunes it says "veryifing iphone settings" but will not load anymore, what do i do?

Put the iPhone in DFU mode*. Connect in iTunes and restore.
*Use Google.

Installed Acrobat XI Standard on windows 8.1, see it in my download folder but it will not run? Help?

Installed Acrobat XI Standard on windows 8.1, see it in my download folder but it will not run? Help?

Also, once you successfully install, please backup the install file to a separate HD and/or CD. I agree that your comment is not clear. You say you installed it, but it is simply in the download folder. Did you run the install file that you downloaded? The download does not install the program, but the install is an extra step.

TS3212 I'm trying to download i tunes for windows 8 but it will not complete the process?

I'm trying to download i tunes for windows 8 but it will not complete the process

does it give you an error message?

Battery shows as having charge in System Profiler yet will not run from bat

My MacBook is about a year and half old. My battery just started doing this a few days ago. It shows as not charging. Checking the battery shows that it has 85% power left (this was 86% the day it started). The magsafe connector stays green. The MacBook will not run without the power connected.
I am not sure if this is an issue with the battery, the batteries connector, or with my MacBook. I'm pretty tight fro cash right now and need my MacBook working. I don't have money to throw at parts I don't need. If anyone has experienced this issue before and has any insight please let me know. I'm a starving web programmer and I need to be able to bring my MacBook with me to meet with clients.
Thanks,
Steven
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3738-3b2a
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 102a
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 4211
Fully charged: No
Charging: No
Full charge capacity (mAh): 4939
Health Information:
Cycle count: 232
Condition: Good
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12158
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: No

Do you think it is software. It will not even boot when the power is not connected. I was thinking it was a problems with ACPI in the EFI BIOS. The strange thing is just a moment ago the magsafe went orange and the power states calculating. This is the first time I've seen the magsafe orange since this started four days ago. I came back to this thread to update it with this little tidbit and saw your reply.
This is my current power information from system profiler:
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3738-3b2a
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 102a
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 4199
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4939
Health Information:
Cycle count: 232
Condition: Good
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12148
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: Yes

Running Windows Vista, updated to Forefox 3.0.7 but it will not run. Tried twice.

Was running Firefox 3.5... just fine. Updated to newest Firefox version and the first time it would not open and Internet Explorer stopped working as well. I then restored my computer and tried again.The second time I tried, Internet Explorer still worked, but Firefox would not open. The Task Manager shows that the Firefox process is running but no Firefox window opens. Had to closed the process to reinstall an older version of Firefox to be able to use it.

Thanks - all seems to be working OK! If not, I'll be back!

I am trying to install adobe illustrator CS5 from cd but it will not install

When I install it the message 'installer has failed to initialize' appears. It then advises to download the Adobe Support Advisor. I have done this but the advisor will not respond (I have already installed Adobe Air). I have also successfully run the Adobe cleaner tool.
Any help please?
Message was edited by: charisolivia

Try downloading it and then run the installer.
1. Navigate to Illustrator CS6 Downloads page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=illustrator
2. Sign in with your Adobe ID.
3. Copy and paste the following links on the address bar one at a time and hit enter :
Adobe Illustrator CS5 English Windows
http://trials2.adobe.com/AdobeProducts/ILST/15/win32/Illustrator_15_LS1.7z
http://trials2.adobe.com/AdobeProducts/ILST/15/win32/Illustrator_15_LS1.exe
4. Save both the files.
5. Run the .exe file
In case you still face issues
Run the Creative Suite Cleaner Tool and clean out the temporary files created during install in your temp directory. Additioanlly, check your task manager and terminate any instances of setup.exe and msiexec.exe that may still be running

Why does my .exe file run on the PC I created it on, which has LV installed, but it will not run on a PC which does not have LV installed?

I am trying to run a stand alone application on a PC which does not have Lab View installed. I created the executable file and the installer. However, when I run the .exe the VISA functions contained in the VI return error messages and the power supply I am trying to control does not respond. The stand alone application will run on a PC that has Lab View installed.
My application initially used a VISA resource control to selct the instrument GPIB address on the PC I used to create the application. Since the PC I am trying to run the .exe on has an older version of NI-MAX I cannot create aliases that the VISA control can interpret.I have tried to upgrade NI-MAX hoping that would solve my problem:
Here is what I tried:
uninstall NI-488 and NI-MAX ( if you want to uninstall MAX you must uninstall NI-488 ) reinstall NI-488 and NI-MAX Ver 3.1 then try to install NI-MAX version 4.1 which I downloaded from NI website. When I do this I get an error message when I try to run MAX. None of this worked so I hard coded the instrument address as a constant and again that works on the PC with LV installed but does not on the PC without LV.
Any input would be greatly appreciated.

It looks like you do have the LabVIEW runtime engine installed. It might be that the VISA drivers you have are not compatible versions. In NIMAX, look under software to see what versions of VISA software you have installed on both systems.
It does not matter what version of NI MAX you have installed, since your application does not use NI MAX. NI MAX only helps you look at (or simulate) the hardware and software you have on your system.
One thing you could do is include drivers and the runtime engine while creating your installer. That way, you should be able to do a complete install on a clean system.
Message Edited by Sudhir Gopinath on 06-19-2007 12:26 PM
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor

Trying to upgrade to Lion from Snow Leopard but it will not let me purchase the upgrade telling me my intel imac is not compatible?

HELP!
I have a fully functioning imac running snow leopard fine (recently upgraded to it) because of flash and java issues on browsers seemed I needed to get on to Lion or Mountain Lion so I upgraded the RAM to 2.5GB and now it will not let me upgrade maybe because my model seems to be a late 2006 and not a 2007 imac, cannot understand why it will not let me do this or provide a solution for me to upgrade what I need? Can anybody help, assist or advise?

Also it says this:
L2 Cache:          4 MB
Memory:          2.5 GB
Bus Speed:          667 MHz
Boot ROM Version:          IM51.0090.B09
SMC Version (system):          1.9f4
Serial Number (system):          W8******VUV
Hardware UUID:          00000000-0000-1000-8000-0017F2C63410
Thank you for assistance, Apple wanted me to pay 35 uk pounds to talk to them!
<Edited By Host>

I have installed adobe flashplayer but it will not run. What is wrong?

Today I downloaded adobe flashplayer 11.2.202.235 apparently successfully(so I was informed) but when I try to run a program requiring flashplayer it does not run. What can I do?

Moving this discussion to the Installing Flash Player forum.

I'm trying to run a scheduled task as system, but it will not run my powershell script

Similar Messages

Maybe you are looking for