I'm trying to set up Reaktor 5 v.5.1.2 to run with Logic 7.2...?
I'm trying to set up Reaktor 5 v.5.1.2 to run with Logic 7.2. I have none idea how to do it as I haven't got the manual to help me out. Does anybody knows if I can configure Reaktor to run with Logic after it has been installed? If so, how?
Thanks for all of your help -- I greatly appreciate it and look forward to the responses.
Are you sure about this?
This is the current demo info from their site. This version has the AU.
"Version 5.0.0.020
For Mac OS X
Size: 47.8 MB (runs stand-alone and as plug-in via Audio Units, RTAS und VST 2)
Includes 21 Ensembles from the new library plus hundreds of components to construct new instruments
After installing the software, a quick manual and two tutorials can be found inside the "Reaktor 5 Demo/Documentation" folder.
Demo version can be used for 30 days."
Is this a mistake, how did you get the 5.1.2 demo?
Similar Messages
-
How do I fix this message. When trying to set up the ipod again? There was a problem connecting with the server. please help
Was this the error?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
Having problems with air printer to i pad, problem seems to lie with talktalk router, hp solutions managed to get i mac to air printer working but not i pad, adivsed to buy another router as talktalk is not compatiable with bonjour. Went to PC world apple department advised to by airport express. tried setting it up using but will not finalise. i was led to believe this would replace the talktalk router? i feel i have been sold the wrong thing. Any suggestions
This happened to me when I was setting up the wireless router for a friend. The issue is with the Westall modem. You need to go in and setup the "bridge" option on the westell modem. The link below gives directions or you can call bellsouth dsl support (this is how I learned about it).
http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=3f993409%2Ddff7%2D422...
Good luck
Solution:
Method 1 - Hard Reset
Restore the modem to default settings by pressing the Reset button on the back of the modem and holding it for 3 seconds. (Bridged mode is the default setting for the Westell).
After the modem regains sync, it is in Bridged mode. Do not attempt to surf into the modem as surfing into the modem will enable the Easy Login page and convert the modem from bridged mode to a PPP mode.
Method 2 – Bridged Mode
Access the Westell interface using http://192.168.1.254 or http://launchmodem.
Click on the Broadband DSL Line button.
Click on the Protocols button
Select the radio button to the left of Option 2 (Bridge)
Click the save button. Once the modem has restarted it is in bridge mode.
ALL STEPS COMPLETE -
Today is June 30th and I've transferred my MobileMe to iCloud. Problems with my email folders appearing in iCloud but not on my computer email. Also, I have an Android 3 and am very happy with this phone. My problem is I'm no longer receiving my mac/me.com email messages or ICal schedules which I had before set up through my gmail account. I've tried every setting suggested on line on my phone - still coming up with either username/password error messages or smtp connection error. Ive' tired smtp.me.com and smtp.mail.me.com - neither work. Please HELP!
I recently got the ICS update for my Razr and my me.com email stopped working. I found this article (http://www.wowtechy.com/how-easily-setup-icloud-email-android-running-ics/ ) and now my me.com email acoount works.
Hope it helps you. -
Today is June 30th and I've transferred my MobileMe to iCloud. Problems with my email folders appearing in iCloud but not on my computer email. Also, I have an Android 3 and am very happy with this phone. My problem is I'm no longer receiving my mac/me.com email messages or ICal schedules which I had before set up through my gmail account. I've tried every setting suggested on line on my phone - still coming up with either username/password error messages or smtp connection error. Ive' tired smtp.me.com and smtp.mail.me.com - neither work. Please HELP!
I recently got the ICS update for my Razr and my me.com email stopped working. I found this article (http://www.wowtechy.com/how-easily-setup-icloud-email-android-running-ics/ ) and now my me.com email acoount works.
Hope it helps you. -
I have been trying to set up icloud on my ipad but after I run the program, nothing shows up on my computer screen or ipad. Have I left something out?
Thanks. That was indeed the problem. A few hints for others with this problem. You can only find out that you need to upgrade, and upgrade, by cabling your iPad to your computer. Then the next Tricky part is making sure you have your iPad purchases saved on your computer. Then you download the new OS upgrade and you will get a "start up" type of screen on your iPad with a few questions. Nowhere is there a very good explanation that you want to then go back to your computer and restore your iPad. I finally did that because there were no other obvious alternatives, though all the warnings made me very nervous. After the restore command, I synched my iPad and I seem to have everything back, and I can now access iCloud. maybe I missed some instructions somewhere, but I found this process much more obscure than the usual Apple directions. Thanks for your help!
-
Trying to set up RAID on GNBMAX-FISR
Am building machine - P4 2.8Ghz, 2x512Mb Corsair CMX-512-2700C2 RAM, CD and CD/DVD.
Trying to set up RAID using the Promise built in RAID controller with EIDE drives. According to the manual, you attach a single drive to the RAID connector (IDE3) and I assume the other drive to one of the other two IDE connectors, boot machine and do the CTRL+F to enter the RAID setup. It only see's the one drive, never the second one. I tried to install from scratch, using the "F6" option in the XP install to install RAID drivers, but didn't work. I am going to try installing XP on both drives individually, then conect to the RAID and see if it was just a driver install issue. Anyone out there set up a RAID n this board? The only other RAID I set up was on a PCI card RAID controller.
Thanks in advance!
?(Thanks for the reply. So if I am understanding you correctly, I HAVE to use the SATA connector(s) regardless of if I use the IDE3 for one of the drives? Or like you say, just get the adaptors for both drives and run them on the SATA to get my RAID 1 array set up?
I have 2 WD800BB 80GB drives I want to set up for redundancy. -
I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.
Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M. -
A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!
I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...
-
Trying to set up ereader for library books but unable to authorise computer.
I am trying to set up a Kobo Aura ereader to borrow and read library books. I have verified my Adobe ID. Each time I try (I installed, uninstalled and reinstalled Adobe Digital Editions) I am unable to authorise my Windows 7 computer. I get the following error message.
Activation Server error code:e_adept_request_expired http://adeactivate.adobe.com/adept/activate 2014-11-08T15:38:27-08:00%20(1415489907000)%2015%before%202014-11-08T16:07:07-08:00%20(14 15491627736)
I am going crazy setting up this ereader. Please help me!Let's try this first. Press the wireless button on the front of the printer and execute a "Restore Defaults".
Next, restart the router by pulling its power plug momentarily, then try the WPS procedure again. If that does not work, contact your ISP to see if the WPS button is functional.
If it is not, let me know and I can walk you through a much harder, but effective technique.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
I have an ipad air and I'm trying to set up a telus email on it but it won't work. I keep getting a message saying username or password for IMAP is incorrect...please help!
This has nothing to do with iPhoto. When I have this type of problem I call tech support for my email service. They probably are the only source of the correct settings
LN -
I am trying to set up my new Iphone 4 and download apps. I made an Apple Id which is all good. But when I try and enter in my credit card info it keeps asking for my Zip code and state. I live in Canada not US. I changed the phone to Canadian but it still keeps asking for it and won't let me put in my right information which in turn won't let me download any apps. Can anyone help?
Postal & Zip codes are same. Just enter postal code without space. It will accept.
-
Help....I am trying to set up iClould on my pc....the set up was complete....when I try to sign in to set up it says the Apple ID is valid but is not an iCloud account. Please help me and tell me what I am doing wrong. Thx
Hi DesCoop,
You must initiallly activate iCloud from an IOS device or a Mac. You cannot inititally activated from a PC.
Sorry.
GB -
my two daughters and I have iphones. I am trying to set up and use find my friends with them. We have 1 icloud, but different emails. When I send a request it states that I can't send a request to myself. What am I doing wrong
Sharing an Apple ID is never recommended for these reasons.
They can create their own: http://appleid.apple.com and you can add them at the addresses they use for their ID.
Sharing an Apple ID is not recommended because all of your data gets merged and when it gets deleted from one device, it deletes from them all, such as Contacts.
iCloud Guide -
Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other apple devices I have.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom
Maybe you are looking for
-
How to create a PDF with markup enabled for Reader users?
I have a bunch of Word 2007 documents containing project specs. I would like to be able to turn them into PDF documents that other people can markup using Reader. Is this possible? I tried using the built-in PDF output module. It creates a PDF docume
-
Explain me briefly about Dynamic Actions in PA
HI Experts kindly let me know about the Dynamics actions in Personnel Administration.Am just confusing about this concept.In real time scenario what will be the use of this concept.How it will work ?Why we have given the 0077 as target infotype.Kindl
-
Hi Experts, SOAP, JDBC and JMS Adapter setup(driver Installation) are comes under Post-Installation step of PI 7.0 or developer needs to install those things? Regards Sara
-
Where can I find a Windows Installer disc for Bootcamp?
Or where I can buy it?
-
Canon 50D records video?
When I purchased my Canon 50D last month, the Best Buy salesman raved about how it takes video. For the life of me, I cannot see how to make it do so. Does the 50D really record video or was I duped by the Best Buy rep? Thanks for your assistance.