I'm trying to sync my iTunes U folder to my Nano 3rd generation and I get a "folder is not found" error message.

How can I fix this?

See if there is a solution found on the Frequently asked questions about viewing and syncing video with iTunes and iPod website.

Similar Messages

  • HT201210 I have a dead iPod nano 3rd generation and cannot get anything on the screen when I try to charge it or reset it.  When I try to connect to iTunes says 'The iPod update server could not be contacted.  The server does not support this version of i

    I have just updated iTunes to latest version and am connected to internet.  Can anybody shed any light on this one?

    only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

  • I have iphone4 and MacBookOSX 10.4.11; I'm trying to sync an itunes purchased game from my book to phone and it says I need to update to itunes10. Problem is my MacBook won't accept that version

    I have iphone4 and MacBookOSX10.4.11; I'm trying to sync an itunes purchased game from my book to phone and it says I need to update to itunes10. Problem is my MacBook won't accept that version so how do I get the game on to the phone? When I tried to buy it from the phone itself (as I have others), it wouldn't because over 20 MB

    You need to purchase a retail Leopard install disk or Snow Leopard upgrade disk(if your computer meets requirements for SL). Then update iTunes to 10.1 or greater. Check eBay or Amazon for retail Leopard Disks. You can also try calling AppleCare.

  • Im trying to sync photos from my mac to my iPod nano 3rd generation, and an error keeps coming up that says "format could not be converted". How do I fix this?

    Im trying to sync photos from my mac to my iPod nano 3rd generation, and an error keeps coming up that says "format could not be converted". How do I fix this?

    Hi newipoduser,
    Here are some possible solutions:
    Do you use musicmatch jukebox on your computer? If you do, you have to go into task manager on windows and end process mim.exe. It interferes with disconnecting ext devices
    Empty your "trash/recycle bin."
    If that doesn't work, try quitting all your programs, especially music-type programs, basically things that look for mp3's etc.
    if that doesn't work, "log off" then "log on" and that should refresh/purge your OS system.
    Finally, you can restart your computer.
    Hope one of these helps!
    Cheers,
    GB

  • HT201210 I have been trying to update to IOS 6 for 3 days now - my Iphone4S is in middle of restore and it gets so far then stops - no error  messages - the bar does not move further. it stops at different places - can anybody help please

    I have been trying to update to IOS 6 for 3 days now - my Iphone4S is in middle of restore and it gets so far then stops - no error  messages - the bar does not move further. it stops at different places -
    can anybody help please
    Kulbir

    Stewart
    This forum is for questions regarding the LabVIEW Datalogging and Supervisory Control Module. You will have more luck posting this question in the general LabVIEW forum.
    Good luck

  • HT1386 I am having problem syncing my itunes data from my computer to my ipod and ipad. My data is not fully transferred.  Can someone help me?

    I am having problems syncing my itunes data from my computer to my ipod and ipad.  The data from my computer is not transferring.  Can someone help me?

    What happens when you try to sync?
    Does any media sync?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        

  • TS3297 I have installed, reinstalled, repaired, retarted and followed all trouble-shooting tasks; Now I am getting "Apple Supprt Application not found: error 2(Windows 5). Please uninstall and reinstall itunes.  I have done that. It is listed in my progra

    I am trying to install itunes on my computer (Windows Vista).  After initial instillation I got an error  42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time.  Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer.  I have changed firewall settings to allow acess to all of the apple components.  I have made sure the required ports are open.  All of the components are showing on the installed programs section of my control panel.
    I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5).  It is listed in the installed programs and I have repaired it.
    I am out of options.  And help would be appreciated.

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Trying to track a package on FedEx website and get "Framework Not Found" error message

    Either by clicking on the email from FedEx and launching Firefox or by opening the FedEx website and entering the tracking number, I get "Framework not found" error and the search stops. It worked with previous Firefox versions but not with the new 4.0.1 version. Any suggestions?

    I tried it with firefox and chrome and have the problem in both browsers, so it is not browser specific.

  • HT4623 While trying to sync my ipad, it became stuck in the recovery mode and I get error messages when I try to recover

    While trying to sync my IPAD with ITUNES, my IPAD when into recovery mode and I keep getting error messages when I try to recover it.

    What might these error messages say?

  • I am trying to upload movies from my pc to my itunes, when i select import files or folders and select the movie it does nothing, no error message or anything, it just sits there.

    please get back to me, this is very frustrating

    You are using File->Add File (or Folder) to Library, right?
    Make sure that you also look at the various categories of content stored on the library:  turn on the sidebar (Ctrl+S keys toggle) and click the categories to see if the content shows in the content window of iTunes.
    It could be you are trying to add a video/movie in a format iTunes does not accept because it cannot play it or work with it.  (And yes, if iTunes cannot add it to the library, it should absolutely report an error message rather than leave you wondering and drop the command.)

  • "itunes.exe-entry point not found" error message, itunes won't launch

    32 bit
    xp pro
    itunes won't launch
    HELP!

    Try removing iTunes and all Apple related software using the instructions in this Apple support document and downloading a fresh copy of the newest version from Apple's website.
    http://support.apple.com/kb/ht1925
    B-rock

  • "Disk burner or Software not found" error message when using iTunes

    My g/f has Vista 64-bit. iTunes used to work until we installed Nero. Granted it's more then likely Neros fault since it went ape** with the registry files but has anyone else lost iTunes burnability after installing Nero?

    I seem to be suffering from this very same predicament. And it is really giving me the *****. I installed a new DVD drive that came with the latest version of nero but, I'm not sure that is the problem. When i hit the advanced tab in the preferences and go to burning, it still registers the old CD burner. This seems to be the one feature that can't be changed in that window. Every other burning program on my computer doesn't seem to have a problem. It's just itunes. I want to be able to burn discs from itunes but I can't. Can one of you brainiacs out there in cyber space tell me how to sort this out.
    Message was edited by: jlk76

  • Getting "HP imaging device not found" error when trying to use the scanner in mountain lion. Anyone else have this problem?

    The odd thing is the printer works, but the scanner isn't recognized.
    I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
    Has anyone had this problem and found a solution?
    Thanks
    Steven

    The odd thing is the printer works, but the scanner isn't recognized.
    I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
    Has anyone had this problem and found a solution?
    Thanks
    Steven

  • After installing Firefox 4.0 when trying to print get "Prop Res Dll not loaded" error message. I have a Dell A960 printer.

    Installed Firefox 4.o now when I try to print and click on "properties" I get error message "Prop Res DLL not loaded". I have a Dell Printer A960. Never had this problem before so how do I fix this? I don't know that much about computers so please make it simple as I'm not that literate when it comes to complex computer fixes. thanks

    See this [http://www.google.com/search?q=Prop+Res+Dll+not+loaded&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a Google search] for a "fix".
    Here's a Firefox bug that was filed a few months ago. <br />
    https://bugzilla.mozilla.org/show_bug.cgi?id=649128 <br />
    Looks like a problem caused by Lexmark print drivers doing a strange installation (Lexmark makes some of the Dell branded printers). Mozilla isn't going to revert the way Firefox looks for print drivers due to security concerns.
    See if you can follow the fix posted here: <br />
    https://support.mozilla.com/es/questions/816333

  • Error message when trying to Sync with itunes

    Hi
    I seem to get error messages when I try to sync with itunes. I have the iphone 3G. Also all my music and videos seem to have carried across, all except one, it's very odd. Latest error message reads:
    "itunes could not connect with the itunes store. An unknown error occurred (11556)."
    I have also an error message saying it cannot sync and error message number 0050.
    Any clues?

    "itunes could not connect with the itunes store. An unknown error occurred (11556)."
    This error is associated with ringtones, are you trying to sync a ringtone, purchase a ringtone...need more info...
    I have also an error message saying it cannot sync and error message number 0050.
    Are you on Windows XP? Is this the error message...iTunes displays -50 error message? If so, follow these directions:
    http://support.apple.com/kb/TS1539

Maybe you are looking for