I'm trying to uninstall Citrix receiver from my MAC Air but the program won't close.  Any ideas?

I have a MAC Air running MAC OS 10.7.3.  After downloading Citrix server, I have uninstalled the program but the icon remains in the dock and I can't quit the Citrix receiver on my desktop (it appears to be trying to find a webpage for its server).  Trying to reach Citrix for a solution has been unsuccessful.  Has anyone else had problem uninstalling this program?

Never mind.  I was able to find the solution via an earlier post from West.  Thank you!

Similar Messages

  • TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

    My iMac won't start up, or wake from sleep.  I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up.  Turning it on, you can hear the fan run, but the display stays dark.  Any ideas what to do?  Thanks!

    Mac doesn't boot
    Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
    Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
    Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
    Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
    Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
    [edit]
    What to do
    First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
    If that doesn't help continue doing the steps from below:
    1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
    2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
    3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
    4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
    5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
    6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
    7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
    7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
    8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
    8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

  • I'm trying to place an order for 3 iPhoto Albums, but the system won't take the billing address. I'm in Costa Rica and will send the albums to an address in Miami. Can't find any support live chat for billing issues.

    I'm trying to place an order for 3 iPhoto Albums, but the system won't take the billing address. I'm in Costa Rica and will send the albums to an address in Miami. Can't find any support live chat for billing issues.

    You need to use a credit card with a billing address in the same country as the delivery address.  Since there's no Apple Print Store for Costa Rica I assume you're using the United States print store.  Therefore you'll need a credit card with a billing address in the US.
    OT

  • My iTunes is no longer working.  I uninstalled and reinstalled but the program won't open and run.  I was trying to download an mp3 file last evening and I think something has been deleted that I need to open the iTunes.  How do i figure out what is gone

    I uninstalled and reinstalled but the program still won't open.  I was trying to download an mp3 file last evening.  Instead the site tried to install a new audio player.  I did not want it so uninstalled it immediately.  I think in that process something was deleted that I need for iTunes but I do not know what.  How do i figure out what is gone and recover it?
    I did try a system restore - but that was not a fix either.

    I was trying to download an mp3 file last evening.  Instead the site tried to install a new audio player.
    Ackk ... that behavior is consistent with the play_mp3.exe trojan:
    http://en.wikipedia.org/wiki/Play_mp3.exe
    Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
    http://www.malwarebytes.org/mbam.php
    Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look.

  • Is it is it   easy/advisable to uninstall HP 5520 from my mac air OSXv.10.9?

    My mac-air OSX v.10.9 no longer talks to my printer - printer has lost all connectivity to other networks in the area. I've followed all HP forum advice on resolution, except reinstall  (first installation was done in the Camb Apple Store).
    Does anyone recommend uninstall?  
    Sorry - I have raised similar prob before, but am new to Support Forum and couldn't recover the trail.  Thanks
    HeliaW

    Thanks, Barry, but have done this already - even unpowering the router.   This used to work, but now the Printer won't see any local connections and is asking me to enter my new provider.  It has not changed!
    thanks
    Helia W

  • HT4053 i have downloaded moves from iphone to pc but cannot watch some of them, any idea why?

    i can see some of my movies but others are not supported files, any ideas on why when they were all taken on iphone

    When I hover over cover flow it says I have 12851 songs but when I click nothing happens.
    When I hover over artists or albums it says 'no artists/albums'.
    I can upload again from my CDs but just wondering if there is anything to do. I live abroad so all my CDs are in storage.

  • Adobe Paper extension for PS CC has worked for many months.  Today it disappeared from the Extension menu.  I reinstalled and received a "successful reinstall" message but the extension does not appear any more.

    Why has the Adobe Paper extension for PS CC disappeared from the Extension menu?

    And, of course, as soon as it isn't 3am, I realise that it is because I haven't run the programs in the background. Oh dear...

  • I upgraded to FF 7.0.1 and it won't load. If I try to uninstall it, it says it is running. I have uninstalled and rebooted and installed an earlier version but the program won't open. Can someone please help me?

    I have tried everything I can think of and that has been suggested in your knowledge base but FF will not open. I have downgraded to an earlier version but that didn't help so I've uninstalled everything and have done a clean reinstall of 7.0.1. I've rebooted at each step.
    However when I tried to bring my bookmarks into Chrome (so I could keep working) it said FF was open. Same thing when I went to uninstall it. Task Manager does not show it running. Chrome is working so it's not my internet connection.
    I have not installed any new software or hardware recently although I did upgrade Roboform to the latest version. This was the reason to update FF as the RF addon wasn't compatible with the version of FF I was using.
    I've scanned for viruses and the machine is clean.
    I am on a PC running Windows 7 Home Premium. At the moment I am working off my old laptop but I need FF working on my main machine.
    Any help greatly appreciated.
    Thanks,
    Kathy

    Thanks for this mha007 - I can now open FF with a new profile. Can I copy my settings from the old profile or will this bring over the same problem, maybe a corrupt file. If it would bring the same problem, is there any way I can check which file is corrupt, apart from taking them over one by one?

  • I am trying to download iTunes software to my MacBook Air, but my laptop won't restart. It freezes instead. What do I do?

    Trying to download new iTunes software to my MacBook Air, but when I try to restart, the laptop freezes. Any advice?

    jessicar
    Just user to user....based on past and current history, Adobe Tech Support is not going to help you with a technical issue which is preventing you from using your purchased serial number for Photoshop Elements. Version 12 is not the current version. And, the Adobe Tech Support is limited even for the current version which is 13. If this matter involves a purchased activated serial number trapped on a crashed computer while you are trying to install on a 3rd computer, then probably Adobe Chat Activation can be of assistance. If that is the case and you want to explore that possibility, then click on the following link
    Contact Customer Care
    Photoshop Elements
    Adobe ID, Signing In
    Adobe ID, Sign In, Account Help
    Chat Panel
    If the above link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
    Are you getting one of those "too many computers with your serial number" messages? Then the above should apply to your situation.
    Before the above consider....
    a. For Photoshop Elements technical issues please post your question in the Adobe Photoshop Elements Forum. Somehow your
    question got posted in the Adobe Premiere Elements Forum.
    b. Have you verified your Photoshop Elements serial number at the Adobe web site (http://www.adobe.com) - after signing in with your
    Adobe ID and Password, type My Products in the Search field and follow the path to your product in My Products. Click on Adobe
    Photoshop Elements 12 in your list to reveal the serial number.
    c. Do the install with antivirus and firewall(s) disabled.
    ATR

  • I have been trying to download Maverick on to my 2012 MacAir. It gets to 996MB each time then comes up with error in download, go to purchases and try again. I've tried loads of times but the same thing happens. Any ideas?

    I have been trying to download Maverick on to my 2012 MacAir. It gets to 996MB and stops. A message says there has been an error in the download and to go to purchases and try again. It's the same every time I try.
    Any ideas?

    Hi Guys:-
    If this SAME problems is effecting us all then suspect its not IPS problem as we all get problem at 995.6MB.
    I would think that there is some kind of software conflict.  If we all having this problem just think of how many users have the same but are not on this discussion board, bet you its 100s and 100s.
    Not possible for me to visit store now but will monitor your responce's. 
    Good luck guys, lets make um give us a fix:- I will call them tomorrow and see what they say:-  should point support to this Discussion page and they can answer us !
    Cheers and good luck also

  • I need to uninstall creative cloud from one computer and move the programs to a new computer

    I have a new mac computer and want to move programs form my old mac to my new mac. How do I do that?
    Message was edited by: sham 67

    Hi Sham,
      You are in the forum for Adobe CQ. The forum you need to post this question is Adobe CS - http://forums.adobe.com/community/creative_cloud
    Please post your question to this forum to get an answer.
    Thanks
    Ameeth

  • HT1848 Transferred all games apps from ipad to computer but the apps won't open

    All games on computer but cannot open to play especially the one purchased from itunes

    iOS apps won't work on PC Windows or Mac OS X computers.
     Cheers, Tom

  • I am trying to use a remote control with mac air but no IR, how do I do it

    Bought my Mac Air earlier this year, it has no IR, I have two types of remotes here plastic n metal but cant connect. There is no IR on the macair so I know this is part of the problem, so is there a workaround or a way to pair on bluetooth...If not is there a remote for this macair that will work??
    Thanks
    George

    Hi,
    I use a Kensingtom USB controller that I have had for years.  It has forward and back, laser pointer and screen blackout function keys.  It doesn't act as a media controlller with volume, play, forward and back.

  • I can't hear anything from my mac air .. the sound system doesn't seem to work, i can't hear anything from my mac air .. the sound system doesn't seem to work

    what do i do to fix this ??

    Have you checked System Preferences/Sound/Output to see  if it is set to Internal Speakers and to make sure the Mute checkbox isn't checked?

  • I'm trying to share a web page from safari by email but the recipient only sees a ? when they receive the email any suggestions why?

    I'm trying to share a web page from safari by email but the recipient only sees a ? when they receive the email any suggestions why?

    Ok..   see if emptying the Safari cache helps.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Quit and relaunch Safari and try sharing a webpage.

Maybe you are looking for

  • Computer freezes in lid-closed mode when connected to external display

    I have a Sylvania SC190 CRT display connected to my Powerbook via a VGA to DVI adapter. Every time I put the computer in lid-closed mode and try to run it off of just the SC190, after a few minutes it freezes up and I have to hard restart it(hold pow

  • Report for Material and accounting document

    Hi all,     Is there any report to show the fields as listed below: Mvt type         Material Doc        Accounting doc   Posting date   Quantity         Ammount  thanks & regards Chaitanya

  • Error while generating ABAP proxy client

    Hi, I want to consume a webservice. webservice URL is http://www.w3schools.com/webservices/tempconvert.asmx?WSDL I can import WSDL in soapUI and get the response. But while generating proxy in SAP, ( SE80 -> Enterprise Service ->service consumer -> U

  • What is Solver?  And why does it quit on launch?

    When I click on Launch Pad, one of the icons that comes up is "Solver".  I've tried launching it, but all it does is open Excel and then quit.  It offers me a box to submit a report to Apple and relaunch.  It quits every time. What is it and what is

  • WDS Image deployment with updates applied

    Hi All, Is it possible to capture an image which has windows updates included?  I am currently building a number of machines for rollout and having to wait for 115 updates to be applied to each. I have captured a .wim image and is sitting in captured