I'm trying to update my phone and when I go to software update and click on it all it says it's checking for updates?

I'm trying to undated my iPhone and it won't go past checking for undates?

Are you trying to do this from the phone, or via iTunes? If it is not working on the phone, try a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. Try the update again. You might also want to connect the device to the computer and iTunes and try to update from there.

Similar Messages

  • HT5654 im trying to update my itunes and when i click on help there is no option to check for updates?????? please help

    im trying to update my itunes and when i click on help there is no option to check for updates?????? please help

    Hello davetonge,
    The latest version of iTunes can also be downloaded and installed from the link below.
    If you do not have iTunes installed on your computer, you can download it here.
    iTunes: How to install the latest version
    http://support.apple.com/kb/HT5654
    Cheers,
    Allen

  • Trying to update my iPhone to iOS 6 but get a MSG saying "unable to check for updates"...?

    Trying to update my iPhone 4S  to iOS 6 and it tells me..."unable to check for update", an error occurred while checking for a software update.  What's up with that? Any suggestions/incite would be appreciated.

    Go to iTunes.com, then click on Download iTunes on the top right area, then on the next screen make sure it states iTunes 11.1 on the left side and email is not necessary then click on download now in the blue button. Issue should be resolved

  • I try to update my ipadmini and it say unable to check for update what i did wrong

    i want to update my ipad mini and a message pop up  unable to check for update what can i do

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Update using your Computer... See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • TS3899 email was working then all of a sudden its "checking for updates" and wont update

    My Iphone 4s was working fine and now I can't get the email to update. I have deleted my account and it still isn't working. Everything else internet wise is working, just not the email. Any ideas?

    I can send emails, but when it is "checking for mail" and the circle is moving, it never stops, just keeps searching. I checked my email from my computer and I had 10 new emails, so I know they are waiting for me, I can't even retrieve emails that I have read and are still on my account. It won't bring up the accounts at all

  • Check for Updates and User Account Control

    With Adobe Reader the 'Check for Updates' function under Help does not appear to function when 'User Account Control (UAC)' in Windows Vista is turned on.
    When UAC is turned off, the 'Check for Updates' works, and if there an update is available for Adobe Reader, it will download and install.
    Other programs that update software funtion with UAC turned on, albeit with the additional dialog boxes that UAC brings, namely the CTL/ALT/DEL and user account logon (when applicable.)
    Without updating the Adobe Reader software, users are leaving themeselves open to vulnerabilities.  Without UAC turned on, users are also leaving themselves open to certain risks.  So there appears to be a dilemma presented.
    Does anyone know if/when Adobe will be changing the 'Check for Updates' functionality so it will behave more in-line with the UAC functionality?
    Thank you in advance for your time and attention.

    With UAC enabled, I start Adobe Reader, click on Help, and there is no selection for updating.  There is nothing for me to click.  Additionally, in Edit, Preferences, Updater, "Do not download or install updates automatically" is selected, and everything on the right pane is greyed-out.
    With UAC disabled, I start Adobe Reader, click on Help, and there is a selection for 'Check for Updates.'  In Edit, Preferences, Updater, I can select the various methods of downloading/updating Adobe Reader.  The option to download the update but not install was selected, as I wanted it to be.
    Finally, I noticed that the notice from Adobe, 'Update is ready to install,' appears in the Windows tray.  And it is this point that somewhat changes the serverity of the problem, that is, while 'Check for Updates' is not available when UAC is enabled, it appears that Adobe can still be updated through the automatic download feature.  The only problem with this is that I cannot tell if the update was downloaded while UAC was enabled (probably not since the download setting says not to) or while UAC was disabled.
    In any case, it still does not appear that our clients can get their Adobe Reader software updated while UAC is enabled.  And this represents a security dilemma for us.

  • Firefox 13 linux checks for updates and says it is up to date even though my other systems have auto-updated a week or two ago.

    My firefox auto-updated to 10.0, 10.0.1, 11, and 12. but would not auto-update to 13.0 so I manually downloaded and updated. now that 14 is out it still won't auto-update. by which I mean when I go to HELP, ABOUT, it says it is fire fox 13.0, says it's checking for updates (very very briefly) then says "firefox is up to date". several other systems have auto-updated from 13 to 14, a couple of weeks ago but this one refuses. what's wrong here?

    You will be slightly behind if you use Linux and their own version of Firefox instead of the Mozilla standard version. (Not of course standard in some Linux distros)
    I use Ubuntu, and their Canonical Firefox Aurora just updated I think yesterday from fx15 to fx16. <br/>{''Mozilla/5.0 (X11;''' Ubuntu'''; Linux x86_64; rv:16.0) Gecko/16.0 Firefox/16.0'' ]
    I also have the Mozilla Firefox Release 64bit and that updated as expected a while ago from fx13 to fx14.<br/> {''Mozilla/5.0 (X11; '''Linux''' x86_64; rv:14.0) Gecko/20100101 Firefox/14.0.1'']
    Not sure why fx13 is not updating for you.
    Maybe something to do with your distro IF it is their version. IIRC some early Ubuntu LTS versions probably did not update Firefox. But you may have the Mozilla version as your system info aside shows <br/>''User Agent Mozilla/5.0 (X11; '''Linux '''i686; rv:13.0) Gecko/20100101 Firefox/13.0''
    You could just download the latest version from
    * http://www.mozilla.org/en-US/firefox/all.html
    Just take care not to delete the existing firefox profile, preferably back it up first just in case.
    *[[back up and restore information in Firefox profiles]]

  • IPod acknowledged by PC but only charges while checking for updates

    This may very well be a newbie question, but I have not been able to find any help online. I plug in my ipod to charge, and everything acts normal - if itunes is open, it checks for new songs and updates it, etc, while charging. The only problem is that it does not continue to charge after it checks for updates. As soon as it says it is ok to eject in itunes, the ipod reverts back to normal and after a while just shuts itself off.
    I have tried plugging it in the computer while itunes is closed as well, and it does something very similar. It didn't always used to be this way - Sometimes I would need to fiddle with it, but I could get it to charge.
    Any help is appreciated =)
    5th gen video Windows 2000

    The USB is turning off after it updates and Ejects.
    Right click on My Computer and select Properties, Hardware, Device Manager.
    Click on Universal Serial Bus.
    Right Click on USB Root Hub then Properties.
    In the box, select the Power Management tab.
    Deselect Allow the computer to turn off power to this device to save power.
    Do this for all the USB Root hubs which may show up.

  • IMPORTANT: SQL Developer 1.2.1 Check For Updates Notice

    Please note:
    The Check For Updates notification yesterday and today (16th or 17th Aug) included a file with a number mismatch. This caused SQL Developer to continue to prompt for new Updates. This is also why a new installation of SQL Developer 1.2.1.32.00 prompted for Updates. This error has been repaired. You can now use Check for Updates to update from SQL Developer 1.2 to 1.2.1.
    It remains true that after you have run Check for Updates that you must do a second restart. This is related to the framework and is a known issue.Without the second restart you will not be able to invoke the SQL Worksheet.
    We have identified 2 errors that will be addressed, with new updates sent out using Check for Updates as soon as we can. These two errors are that reports with Charts do not currently work, and non-privileged users can't view tables.
    The team apologizes for the inconvenience.
    Regards
    Sue Harper
    Product Manager

    Hello Sue,
    I just proceeded the update on my working machine too.
    The version number what I talked about (on this machine) was 1.1.2.25 before and still is the same after the update.
    (This is different from my home machine.)
    By the way - I had to restart SQL Dev two times before it realized, that it already has the latest updates. One restart still seems to be not enough.
    Yes I know that all the extensions has it's own versions.
    But for me the question remains: What is the version info under "Help-> About" (in my case 1.1.0.21.) good for? If this number has a meaning - what is it? and if it has no meaning (and only the version number of every single extension is interesting) why does these version number exist at all?
    You said: until then I recommend you use the full download.
    Question: Is it guarantied, that (at any time) the full download always has all latest extensions ?
    Regards
    Andre

  • Wish:  Check for Updates on the Help menu

    both Opera & Firefox have a "Check for Updates" on their Help menu. I wish that Safari for Windows would also have the same thing.
    I don't like "Apple Software Update" and wish that it was not part of the Safari installation.
    I prefer to manually check for updates.

    I don't like "Apple Software Update" and wish that it was not part of the Safari installation.
    ASU is optional. You can uncheck it during installation or you can uninstall it later through "Add/Remove programs".

  • Aye have bought an old iphone 8gb phone its not a 3g one and aye can't download any apps because it needs to upgrade to ios4.3 how do aye upgrade my iphone? I have tried checking for updates but it keeps saying its up to date

    Aye need to update my old iphone 8gb its not a 3g phone its the older one to ios4.3 and it won't let me update so aye can't download any apps and aye have tried checking for updates and it says that my iphone is up to date can anyone help?

    To identify your iPhone see:
    http://support.apple.com/kb/HT3939

  • I have tried to update my iphone 3gs and i need to get ios5 and when i click on check for updates it says that itunes can not be contacted and check my internet connection but i have internet? how else can i get ios5 on my phone?

    i have tried to update my iphone 3gs and i need to get ios5 and when i click on check for updates it says that itunes can not be contacted and check my internet connection but i have internet? how else can i get ios5 on my phone?

    edit the hosts file on your computer and remove any lines that contain gs.apple.com. Disable your antivirus and firewall.

  • I tried updating my phone but it went to the iTunes logo and a charger logo

    I tried updating my phone but it went to the iTunes logo and a charger logo

    You are in recovery mode, you need to restore it through iTunes on your computer then reload your most recent backup.

  • HT3743 I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do

    I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do, for solution,
    please advise me,
    best regards,
    Ahmed

    try to edit your host file ang delete any line that contain gs.apple.com

  • When I try to check for updates, an error message appears with no details. How do I get and check the updates on my new intex cloud fx phone?

    I have a new Intex Cloud Fx phone. In this, I go to 'Device in formation' and try to update the device by pressing update now, I get an error message that says 'an error occurred while checking for updates'. Also, it does not respond to the' last updated' command. When I press 'more device information' I can see’ OS version Intex_Cloud_FX_V07’. I have tried all kinds of procedures suggested on the net and elsewhere but have not succeeded in updating my phone, so far. This includes resetting the phone. I am using a Wi-fi connection. It seems that quite a few persons are facing this problem. There have been suggestions ranging from 'there is a bug' to 'there are no updates'. So, the problem persists, with no end in sight. I feel Mozilla should look at it.

    Hi!
    Thanks for contacting us today! I understand you are having issues with updating, and using the device.
    I believe that we are aware of the update issue however, it is ultimately the carrier/ manufacturer to provide updates. Please contact the respective company for assistance.
    As for device using, and things not working. Please provide us with more details. (Note: the bug may have already been fixed, but is available in a later update).
    Thanks!

Maybe you are looking for

  • What are the img setting to be fullfilled while copy the Sales document typ

    Hi What are the setting to be fullfilled while copy the sales document type and item category. Note:  I have already copied, but unable do the PGI(Post goods issue),  and Billing. Thanks Prasanna

  • Documents open "small" in newest version of Pages 5.5.2

    I just noticed this in the most recent version of Pages and it's making working with old documents...tedious. Instead of opening in the view size that I had closed them as, all existing Pages documents open in the same window dimensions, so I have to

  • About report preview

    Hi all when i press View Output (the report request's phase/status is completed/normal => OK ) the message of Browser is: http://x.xgames.org:2000/OA_CGI/FNDWRR.exe?temp_id=1808632377&login=APPLSYSPUB/PUB@PROD Content-type: text/plain Error connectin

  • How to increase memory associated to was

    Hi all; During our development period, we always meet with ' out of memeory ' error when we are debugging. Is there any place for us to set memory for was ? Thanks

  • HashMap question please

    Dear All, i am using in my code a hashmap< ArrayList<Byte>,String> and : Long bits = new Long(0); for (int i = 0; i < nodes.length; i++) { if (nodes.getValue() != null) { ArrayList<Byte> search = nodes[i].getValue(); String s = huffmanTable.get(((Arr