I'm trying to upgrade from an iphone 4 to an iphone 5. How do I deactivate my iphone 4 in messages so I can receive them on my iphone 5?
I'm trying to upgrade from an iphone 4 to an iphone 5. How do I deactivate the iphone 4 so I can receive my messages and mail on my iphone 5?
Settings --> Messages
Similar Messages
-
My iPhone won't send email messages - but it can receive them!
If, following a password change on you AOL account, you find your iPhone will no longer transmit/send out email messages, but can still receive them, it's a quirk of the system . . . but you can fix it easily. Here's the why and how:
Transmit problems after you change password for AOL. This would be no problem except that the iPad and iPhone allow you to alter only the incoming email password 'manually' (to match up with AOL), but won't allow you to change the password for "SMTP" sending of email, i.e., outgoing messages. Of course, if you can't update BOTH to your new AOL password, it means you can only receive emails; not send. Thus, to update both receiving and sending, you have to REINSTALL AOL: Here's how:
(a) in Settings, select Mail, Contacts & Calendars,
(b) under Accounts, select AOL (if you only have AOL on that device, it will automatically be pre-selected)
(c) With you AOL email address in the "Account" line, select "Delete Account" and confirm,
(d) once deleted, go ahead and perform a "soft shutdown" of the iPhone: hold down the "off" button of the iPad/iPhone to shut down the whole system, then turn it back on a minute or so later by holding down the "on/off" button for a couple of seconds until you see the white Apple, giving the system time to restore to a normal desktop, then . . .
(e) go back to Utilities :: Mail, Contacts, Calendars :: under Accounts select "Add Account" and follow instructions (not hard),
(f) once that's all done, go back and look at your AOL account and be sure the "SMTP" part is turned "ON" with the green toggle switch. The new account will be ready to use immediately, with the new password working for sending and receiving emails.
(g) send yourself a "test message" to confirm that it transmits and is also received with no error messages.TThe issue is with your email account charter, especially if the error message states the your outgoing mail server is wrong. not an issue with your phone, software or Apple.
-
I can not send messages on an iPad mini the send button stays light gray and will not send. I can receive. I reset and logged out and back inn with no results. It worked fine when we first set it up. Any suggestions?
Hello iMessage issues 1234,
Thank you for the details of the issue your daughter is experiencing with sending messages on the iPad. It sounds like you might have the Subject Field turned on. To disable this go to Settings > Messages > Show Subject Field.
iPhone User Guide - Messages settings
http://help.apple.com/iphone/7/#/iphf2d853e3
If the Subject Field is not enabled but messages are still not sending, I recommend continuing with the following article:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When I want to crop pix on my Mac I send pictures to my iPhone where I can crop them then send 'm back to my Mac so that I can use them There must be a simpler way (beisdes forking out 5 bucks to companies that make a profit on a requirement that should be included in the MacOS). I feel I am missing out on something...
You could try and make 're-size and rotate' kinds of corrections as necessary and then make a screen shot of them on the desktop of your computer, as they should be in .jpg format or easily saved as such when done...
The default system application that opens files like text, images, and the like should be able to handle the resulting files for a peek as well.
You may be able to choose a basic application (like Preview) that was included with the OS X. You can zoom-to-fit an image into a window, then screen capture it using the standard keyboard shortcuts in OS X. I've done this in most versions of OS X (& Mac OS 7~9.2.2) and like simplicity.
Good luck & happy computing! -
My wife has a motorola KRZR K1M Cell Phone. I have iPhone 4S. My phone (4S) receives and display text messages from my wife's phone. However, my phone does nort receive or display pictures sent from my wife's phone. However, my daughter has a 4S phone and she receives pictures sent from my wife's phone. What is the problem with my phone?
Do you have MMS enabled, both on the phone and also within your account? Remember, MMS requires a data connection.
-
HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?
Please google search for "Mountain Lion disk crash" before upgrading you mac pro. You might need to replace you Mac hard drive after the upgrade.So many people had the same problems including me.
Be aware of the Mountain Lion upgrade problem. -
I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc. It started to install the first time and said it needed to restart to finish, restarted but ejected the disc. It ejects every time now. I've also installed the 10.5.8 combo update but that didn't help it. I've tried restarting the macbook with the disc in, holding c, all that. Why won't this work?!
Zap the PRAM and Reset the SMC, then try again.
-
I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?
http://support.apple.com/kb/TS2986
-
I am trying to upgrade from 10.4.4 to 10.4.8
For some reason the installation didn't work.
It jst sat there stuck for a long time.
I finally cancelled the installation and restarted.
Though now Mail doesn't work.
any idea what's going on?For some reason the installation didn't work.
It jst sat there stuck for a long time.
How did you obtain the 10.4.8 update? Were you running the Installer application & if so where in the process was it stuck?
I finally cancelled the installation and restarted.
How did you do that? Did you get any warning when you cancelled the installation?
Though now Mail doesn't work.
any idea what's going on?
Most likely, you had some underlying file system or permissions problem that interfered with the installation & canceling it left the OS in an unknown state.
I suggest you first try running Disk Utility's First Aid repairs on your startup volume while booted from your Tiger installer disk. If it reports no errors or is able to fix any it finds, then reboot from your normal startup volume & try to download & install the combo version of the updater matching the version of the OS you want to end up with. -
I'm trying to upgrade from 10.5.8 to Snow Leopard
I'm trying to upgrade from 10.5.8 to Snow Leopard but keep getting an error message, "This update requires Mac OS X version 10.6.". Isn't Snow Leopard 10.6?....so now what?
It sounds more like you are trying to use an updater rather than the Snow Leopard installer DVD. You might read over the following:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
I'm Trying to upgrade from Mac OS X 10.5 to Mac OS X 10.6, but my imac won't let me... and yes it's intel based
Hello, what exactly happens when you try?
Os it a Retail Install Disc, or did it come with a different Mac?
Fo you have enough RAM & Free space?
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply. -
after trying to upgrade from 4.3.4 to 5.0 stuck on recovry and giving error every time im trying to restore
what to do ?
tried tiny umberlla dost do anythingWhat OS is on the Install/Restore DVD that came wit your G5? If Tiger 10.4.x, you will need a black, retail Leopard install DVD. There is no free download of Leopard, only free updates once you have installed the base OS.
First use your Mac's Install/Restore DVD to install an OS & apps. Then upgrade the OS.
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
Cannot upgrade serial number after download. 'This serial number is not for a qualifying product'. Trying to upgrade from ACS 5.5 Design Premium to ACS 6 Design Standard
start the installation of design premium cs5.5 just to make sure you're using the correct serial number. once your serial number is accepted you'll see a screen giving you the option to install none, some or all of the cs5.5 programs. at that point you can quit and not install anything having verified your cs5.5 serial number if you want nothing cs5.5 on your computer.
on the other hand, if your cs5.5 serial number is not accepted, you'll pinpoint the problem.
or, if your cs5.5 number is accepted, you could install a cs5.5 program and then install cs6. it should recognize you have a cs5.5 program installed and NOT prompt you for you cs5.5 serial number allowing you to continue with your cs6 installation. -
Trying to upgrade from Cu3 to Cu5 - not working
I am trying to upgrade from CU3 to CU5. Running the commands below return these results:
>Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 5 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis
COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema
COMPLETED
>Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 5 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis
COMPLETED
Configuring Microsoft Exchange Server
Organization Preparation
FAILED
The following error was generated when "$error.Clear();
install-AdministrativeGroup -DomainController $RoleDomainController
" was run: "Microsoft.Exchange.Data.Directory.ADObjectAlreadyExistsException: Active Directory operation failed on WS12-AD.XXXXX.org. The object 'CN=Folder Hierarchies,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=XXXXX,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=XXXXX,DC=org' already exists. ---> System.DirectoryServices.Protocols.DirectoryOperationException: The object exists.
at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, Nullable`1 clientSideSearchTimeout, IActivityScope activityScope, String callerInfo)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Directory.ADDataSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
at Microsoft.Exchange.Management.Deployment.InstallAdministrativeGroup.InstallConfigurationObject[TObject](ADObjectId id, Boolean force, TObject instance)
at Microsoft.Exchange.Management.Deployment.InstallAdministrativeGroup.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
>setup /m:upgrade /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 5 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Languages
Mailbox role: Transport service
Client Access role: Front End Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Management tools
Client Access role: Client Access Front End service
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites
COMPLETED
Prerequisite Analysis
COMPLETED
Configuring Microsoft Exchange Server
Organization Preparation
FAILED
The following error was generated when "$error.Clear();
install-AdministrativeGroup -DomainController $RoleDomainController
" was run: "Microsoft.Exchange.Data.Directory.ADObjectAlreadyExistsException: Active Directory operation failed on WS12-AD.XXXXX.org. The object 'CN=Folder Hierarchies,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=XXXXX,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=XXXXX,DC=org' already exists. ---> System.DirectoryServices.Protocols.DirectoryOperationException: The object exists.
at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, Nullable`1 clientSideSearchTimeout, IActivityScope activityScope, String callerInfo)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Directory.ADDataSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
at Microsoft.Exchange.Management.Deployment.InstallAdministrativeGroup.InstallConfigurationObject[TObject](ADObjectId id, Boolean force, TObject instance)
at Microsoft.Exchange.Management.Deployment.InstallAdministrativeGroup.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
I can't seem to find any more info about this error and could use some help resolving it.
Thank you,
JoeLooks like I found the answer here:
http://blogs.technet.com/b/manjubn/archive/2013/09/02/1-exchange-server-2013-preparead-or-cumultive-update-installation-fails.aspx -
Trying to upgrade from 3.6.17 to 3.6.18.
Trying to upgrade from 3.6.17 to 3.6.18. Window says Downloading the Update. Connecting to the Update Server. Nothing happens. horizontal Barber Pole just spins. Mac OS 10.4.11 Dual 1.25 GHz PowerPC G4 2 GB Ram
Trying to upgrade from 3.6.17 to 3.6.18. Window says Downloading the Update. Connecting to the Update Server. Nothing happens. horizontal Barber Pole just spins. Mac OS 10.4.11 Dual 1.25 GHz PowerPC G4 2 GB Ram
Maybe you are looking for
-
Need to dial a phone number from Cold Fusion
My boss asked me if there was any way that a phone number could be dialed from Cold Fusion. We have a website where at some point we want to just click a button and dial that phone number. My guess is that the conversation will then be carried throug
-
Best practice for installing many SL-500
Hi, I have just bought 25 SL-500 and are to buy a hundred more in half a year. They are all model 2746-4DG I wish to make a special installation with all standard software of my office and transfer this to a DVD as a Ghost Image. Normally (in my old
-
Can you change the description in contacts from iCloud\
In contact can you change the description from "icloud" to a differant name?? I have several accounts and want them to have a unique name. Any Help?
-
Horizontal scroll bar on text item
Hi, I have a text item. I have enabled Vertical Scroll Bar. I need to enable Horizontal Scrolling as well on the text item. How is this possible? Thanks
-
Hi All, Every thing is configured without any error. I have palanning and Foundation services on different linux boxes. when in trying to open planning application from workspace, its giving an error: 1) Invalid or could not find the module configura