I'm trying to use idvd '09 version 7.1.2 on a powerbook running lion 10.7.2, the system does not locate any themes and therefore will not boot up, any suggestions?

i'm trying to use idvd '09 version 7.1.2 on a powerbook running lion 10.7.2, the system does not locate any themes and therefore will not boot up, any suggestions?

Hi
May be help here
iDVD Themes
iDVD 1 to 7.0.4
Root level = Macintosh HD / Library / Application Support / iDVD / Themes
or
Macintosh HD / USERS / Your name or login identity / Library / Application Support / iDVD / Installed Themes
iDVD 7.1 (from F Shippey )
The iDVD 7 themes are part of the iDVD 7 application package.
iDVD - ctrl-click Show content of package
Resources / Plug-ins/ - and here they are
See if You can restore them manually.
Yours Bengt W

Similar Messages

  • I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

    I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

    Do you remeber the exact (or close to it) wording of the error message?
    Try manually placing the iPod in Recovery mode and then try to restore
    Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can also try another computer  to help determine if you have an iPod or computer problem.

  • MacBook Pro 10.6.8  My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it.  All this after a scheduled software update. Any ideas??

    MacBook Pro 10.6.8  My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it.  All this after a scheduled software update. Any ideas??

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem-.thanks

    I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem….thanks

    If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

  • HT1338 Never happend b4! usign Mac for 19 yrs. got phtos on desktop but nothing in them and they will not delete...suggestions?

    Put phot son desktop a couple of days ago and now there is nothing in them, I imported into iPhotos and they will not leave the desktop.
    Any suggestions??
    thanks
    m.e.

    I have the same behavior but do not have Bootcamp.
    This bizarre file just seems to create itself in my Trash and when I empty trash it stays there. If I drag it ti the desktop it just disappears...
    Any more ideas?
    Thanks for the help!
    Screen Grab of the item in my Trash:
    http://gallery.mac.com/bernardmac#100257/Picture-201&bgcolor=black

  • After transferring all info from the 3G to 4 I cannot update my applications--It has my old email listed and not my new email and it will not let me update--How do I do this-  I cannot get any new downloads.  Can you help me?

    I cannot update my update my apps that were transferred to the I-4 nor can I purchase any items because it show my old email ([email protected] ) as my user name and I do not know how to change it to my new address [email protected] .Please advise!

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.

  • HT5616 how do i change my apple id on my iphone. I have changed it on my account but the phone still has the old id and therefore will not allow me to doadload any apps

    How do I change my Apple ID on my iphone? I had to change my email address but haven't been able to successfully on the my phone and not it will not allow me to download apps because the id is the old one

    settings - app/itune store - apple id - log out and log back in with your new id.
    NOTE:  apps are tied to the apple id that was used to purchase it.

  • My macbook pro charger will not charge my mac. The charger is in great condition, but it will not register as charging and it will not charge my computer. is there any way to fix this?

    My computer has stopped recieving charge. The charger is in great condition, but it will not register, nor charge my computer. I do not know if its my mac or the charger. Is there any way to fix this?

    Do you have another charger to test with?
    It is very possible that somehow the wire might have gotten bent without your knowledge and that is why it is not working.
    If you have an Apple store near you, you might want to set up a genius appointment so that they can test it for you.

  • I am trying to center my content, but the Divs (which contain my spry menu and logo) will not center

    I have two Divs (there will be more in the future) that I am trying to center together on my page, but when I use the #wrapper code I have seen and a div tag, nothing changes.
    This is my HTML code
    <body>
    <div id="wrapper">
      <div id="Logo"><img src="Backgrounds/Color-War-Logowhite.png" width="250" height="250" alt="The Color War"></div>
      <div id="MenuBarDiv">
        <ul id="MenuBar1" class="MenuBarHorizontal">
          <li><a href="#">Home</a>    </li>
          <li><a href="#">About</a></li>
          <li><a href="#">FAQ</a>    </li>
          <li><a href="#">Registration</a></li>
          <li><a href="#">Contact</a></li>
        </ul>
      </div>
      <div id="Home-Splat"></div>
      <div id="About-splat"></div>
      <div id="FAQ-splat"></div>
      <div id="Registration-splat"></div>
      <div id="Contact-splat"></div>
      <p> </p>
    </div>
    <script type="text/javascript">
    var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
    </script>
    </body>
    and this is my CSS
    #wrapper {
              width: 960px;
              margin-right: auto;
              margin-left: auto;
    I am new to dreamweaver and webdesign and can't figure this out.
    Can anyone help me with this?

    You're welcome
    Find any hosting you can
    http://www.w3schools.com/css/

  • After installing Lion my keyboard will not work at all and it will not recognize my wi-fi connection at times. Any ideas for a solution to this problem?

    It will not let me type anything now and the wi-fi connection is not recognized at times! Please help!! This only happened after I downloaded Lion.

    Now that you have restored it to Apple software, we can help - no kidding.
    If WiFi is grayed out (tap Settings first) then you will not be able to select WiFi. See this article: http://support.apple.com/kb/TS1559
    If you can select WiFi, your touch will then detect WiFi networks that are within range. Networks that are protected by encryption will display with a closed lock. Open networks will have an open lock. Networks are displayed by strongest signal to weakest signal.
    Closed/locked networks require a password or WEP key to join. Open networks often require that you agree to terms and conditions for that network. This usually occurs with a Safari-like screen that appears 15-30 seconds after you tap on the network. Until you go through that screen, it might look like you are connected but you are not.
    Spend some time going through the basic WiFi troubleshooting guide: httpL//support.apple.com/kb/TS1398

  • My ipod 2g says I am connected to wifi but when I go to the home I see no wifi bars and it will not let me use the internet, My ipod 2g says I am connected to wifi but when I go to the home I see no wifi bars and it will not let me use the internet

    Plzzzzz help

    Does the iPod connect to other networks?
    Do other devices now connect?
    Did the iPod connect before?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • After downloading foxfire 4 it says I have to shut down foxfire before it will install. I cannot go any further and it will not let me install the foxfire program. What do I have to do to install forxfire onto my laptop?

    I downloaded foxfire 4 onto my laptop. As soon as I start into the install program a message comes on that foxfire will not install untill I exit forxfire. There is nothing running except the install program. As soon as I click ok everything exits and starts all over again with the same message. It will not install. What can I do to get it installed

    To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
    The first step in addressing the black screen is an SMC reset.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Excerpt from
    http://support.apple.com/kb/ht39

  • Could you please let me know if Flash Player will inform a user that his system requirements are insufficient when trying to use a given version of Flash Player?

    Hi,
    Could you please let me know if Flash Player will inform a user that his system requirements are insufficient when trying to use a given version of Flash Player?
    Regards

    It depends, but in general, no. 
    The guidance on minimum system requirements is mostly about what we will and won't fix bugs for.  Flash Player probably works on Windows Server 2000, and we're not going to intentionally break it or prevent you from installing it, but we're also not going to fix it if it breaks.  In instances where it's going to crash on launch or have some other horrendous out-of-box experience, like attempting to install on a PowerPC Mac, then we'll prevent the installation outright.

  • My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account and reseting it and it still only picks up the old messages? Anyone else having tis problem? ANy ideas how to fix it?

    My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..)  and setting the account back up?  and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
    This just started happening for no reason...no changes to the phone or Ipad?

    my iphone and ipad will not send or receive emails or messages for the last few days.  it is telling me that cannot connect to server

  • I've downloaded the newest version of softwear to my iTunes libary (iOS 10.5 i believe) iTunes store now dosn't function right and i'm not able to sync. my iPod 4G with my libary. i've tried to reinstall iTunes, but for no use. help please.

    I've downloaded the newest version of softwear to my iTunes libary (iOS 10.5 i believe) iTunes store now dosn't function right and i'm not able to sync. my iPod 4G with my libary. i've tried to reinstall iTunes, but for no use. help please.

    well i have to be honest, but i don't know if it the vista you use has any significance for this. but you can try.
    okay follow:
    1: click "start" on the status line on the buttom of your screen.
    2: then click on "all Programs" and find "Accessories" and find the "command prompt"
    3: Right click with your mouse "command prompt" and click on "run as administrator"
    (as you has click'd on "run as administrator", "command prompt" should appear.)
    4: when it appears you need to type this "netsh windsock reset"
    5: wait for your computer to registrer the command you gave it, and restart your computer.
    then erverything should be pretty much as good or better then new.

Maybe you are looking for

  • Firing event once a specified media time is reached. Please help!!

    Hi all. I'm a student and a project I'm doing involves JMF. I can't find anyone to help me on this one so please help. What I'm trying to do is to do some action (for a simple example, just print something out) once the video has been played for a ce

  • NT multicast

              Hello,           Would someone happen to know if IP multicast is implemented at all in NT           4.0?           Windows complains about any IP with first byte greater that 223           thanx,           Marin           "And it comes to b

  • Send SSH Command using java

    Ok. I hate this, but this is they way they have implemented it. I do not have access to the server code that this applicatio sits on, so I am only able to send specif commands with java through there interface. One of the commands for example is: pas

  • Taxcode changed,excise not flowing

    dear all, we are following TAXINJ procedure, due to recent change in the ed from 14 to 10 we have changed the tax code from 14% to 10%. we are now facing the problem that the excise values are not following at the time of PO creation and as well as i

  • Secure Page lock icon on browser

    I'm calling the worldsecuresystems page for my subscription form page... https:// (etc) - is there a reason the lock icon in the browser isn't showing up?? it would make me feel so good! https://bigriverreport.worldsecuresystems.com/big-river-report-