I'm trying to use the slide to unlock bar but the iPad 3 touch screen is non responsive.

iPad 3 touch screen non responsive. How can I fix this?
I'm trying to use the slide to unlock bar but the iPad 3 touch screen is non responsive. How can I fix this!

I tried that step but it would not work. I think I may have changed a setting.
I was able to highlight a function but had to tap 3 times to get it to respond
to the command. I think it's some type of Restriction or Accessibility settings.
Any suggestions?

Similar Messages

  • HT1430 the "slide to unlock" bar disappear when I turn on my iPad

    the "slide to unlock" bar disappear from my iPad suddenly. I am not able to unlock the device to use it.

    See of this helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • HT4864 i lost my ipdad this month, i am trying to use my find my iphone feature but my ipad always appearing offline

    i lost my ipdad this month, i am trying to use my find my iphone feature but my ipad always appearing offline.
    Please seek your kind support in order to find out my IPAD 4 location in the following senarios:
    1- IPAD4 is not offline.
    2- IPAD4 apple id was changed to the theif ID before i place the lost mode.

    If you activated the Find My iPhone service (in Settings>icloud), and if the device's batteries still have a charge, the device is not turned off and has not been reset and is connected to wifi, then you can try to track it.  Using a computer, log into icloud.com and look at the Find My iPhone page.  On a device, invoke the Find My iPhone app (get it for free at the itunes app store) and log into the icloud account.
    If it is offline, then one of the requirements listed above is not met (like being connected to wifi, or if the device was stolen and the thief reset it).

  • When we miss a call, the "Slide to Unlock" doesn't respond to touch. The only way out is to have someone call your iphone and then "Slide to Answer" will respond and once u end the call it will start responding to "Slide to Unlock" this started happening

    When we miss a call, the "Slide to Unlock" doesn't respond to touch. The only way out is to have someone call your iphone and then "Slide to Answer" will respond and once u end the call it will start responding to "Slide to Unlock" this started happening after upgrading to IOS 7.
    iphone 4S IOS 7.0.3.

    In your first post you mention you have done a reset and a restore. Those are the last two processes in the user troubleshooting. If those do not work, then the last thing is to go to the Genius Bar. You say you went to Apple and they opened the phone and re-seated the connectors? That sounds unusual, because if there was a hardware issue,they would replace the hardware. You say you cannot get a replacement, is that because you are out of warranty? An out of warranty replacement is only $199 plus tax. It seems to me since you mention the fact you need to press hard to get the screen to react there is something going on with the hardware. If this problem has been going on for over a year, have you been reporting this to Apple. You say you cannot get a replacement and you are on the second phone, I wonder why they are denying you a replacement. Is there something you are not telling us??

  • Why does camera icon appear next to slide to unlock bar on my IPod touch?

    why does camera icon appear next to slide to unlock bar on my IPod touch?  It makes a shutter sound when I turn the touch off

    rsejnost wrote:
    why does camera icon appear next to slide to unlock bar on my IPod touch?  It makes a shutter sound when I turn the touch off
    The camera icon appears so that you can take a picture quickly without having to enter your password.  It is not responsible for the shutter sound.  The Touch always made that sound when manually closing or going to sleep even with older iOS that did not have the camera icon.

  • My IPod Touch has a black screen.  When held in an angle u can see the slider to unlock it but it will not respond to my touch

    my ipod has a black screen.  When I hold it at an angle i can see the unlock bar and date/time.  It will not respond to my touch to unlock it.  Any ideas to what is wrong with it?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • How do I disable the "slide to unlock" redial when the call fails?

    I have an Iphone 4s with At&t... When a call fails while on my bluethooth headset a notofacition pops up on the lock screen and if I unlock my phone it automaticly redials the person I was talking to when the call failed... How do I disable this "auto redial" function?

    I downloaded the user manual and found it.
    Settings/Language & Input/Read notifications aloud/
    Add or remove from Read Notifications.
    Under Language and Input/Google Voice Type/settings/Speech output/ I selected Hands free only.  However I assumed the Read notifications would only be read in the car mode.

  • My ipod is disabled and the slide to unlock screen isnt coming up. how do i fix it

    my ipod is diabled and the slide to unlock bar isnt coming up on the screen. when i plug it into itunes it tells me to enter my password on the phone before it can be used with itunes which i obviously cant due to the slide to unlock bar not being there. help me...

    Place the iPod in recovery mode and then restore the iPod via iTunes.  For recovery mode see:
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • IPod Touch Gen 2 turns on but the slide to unlock does not slide

    Hello all,
    Yesterday morning my iPod Touch was fine. Yesterday evening it would turn on, but I could not make the slide to unlock bar slide over. There is a specific point where it looks like it will go, but it stops and slides back to the far left. I have tried restoring it, but it still won't slide. It is updated to the new OS and has been working for several weeks before this happened. It still connects to iTunes and it charges just fine. I do have the 'grey app icons' issue, but after reading several posts, it doesn't seem related. It was extremely cold yesterday. Could I have inadvertently broke something? There are no cracks or obvious differences other than I can't make the bar slide over.
    Thanks for looking this over.

    I did all that you have listed here and I still cannot make the slide to unlock bar move. And when I press and hold the on/off sleep/wake button and the home button at the same time I get another slide bar at the top that I cannot move and a cancel button at the bottom that works at only one spot on the button. It is as if the screen is registering my touch at one vertical line on the whole screen.

  • I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

    I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

    I keep saying this over and over, in the hope that people who do a search will find it.  Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there.  The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple.  They're expensive, but they work perfectly.
    My guess is that you bought a cheap MDP to HDMI cable, or have a defective one.  From my reading of these boards over the past few months, cheap cables have a high failure rate.  And the regular priced ones have only a slightly less of one.  Try a new one.  Make sure you do not damage the Thunderbolt port.

  • Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation.

    Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation. The tabs on bottom of all apps also work fine.
    I have already tried holding down the power button and home button for 10 seconds, but no difference.

    I've had this problem on and off for the last few weeks (around, but not directly related, to upgrade to 6.1...can't remember if was before or after)....I'm very convinced it's a software problem (as there have been times when the bottom row works perfectly, without any need to "press" differently or anything).
    However, it seems to be a rather resilient software issue, as a full restore does not consistently fix it, and it applies to more than just the keyboard; if I open a drawing app, there's definitely a row (about 4mm up from the edge of the screen closest to home button) where I cannot draw.
    It's happened 4 times now.  Originally it went away with a restore from backup, then worked for 2 more days.  The second and third times, it went away with a full restore (although I did two full restores in between those two restores that did nothing, so restore didn't consistently fix it)....and it seemed to return in the most random of circumstances. 
    I paid very close attention to what apps I was using the last time it was working so that I could spot which app, if any, might be causing the issue.  I deleted several apps, I stopped using the games and many other apps.   I only used three apps between it working fine and starting up as a problem again: mail, safari and messages.
    I was convinced it was mail, as it happened this morning when I picked up my phone off the bedside table to respond to a new email.  It was working when I went to bed.  I picked up the phone when it buzzed, hit the email app, hit reply and started to type....**** bottom row wasn't working again.
    However, tonight I did 2 things....one of them worked because it went back to normal (sorry, I don't know which as I was exasperated and trying a number of things). 
    The two things I did between a broken keyboard and a working keyboard were:
    1) adding a second keyboard (English(Canada)), changing to this keyboard, and changing back
    2) disabling Siri...and then turning it back on...and then disabling Siri's "Raise to Speak"
    In retrospect, I wonder if it actually was the "Raise to Speak" that was putting the phone into a weird state, and might explain why the phone would just "suddenly" start behaving strangely when I picked it up.  Of note, the "raise to speak" hasn't actually triggered Siri to come on in months anyway.
    Regardless, the keyboard is back to normal now...and I'm just going to leave "Raise to Speak" off.  I've put the keyboard back to just "English" with no alternates and Siri remains on otherwise without issue.

  • I tried to update the App that I purchased but the message told me that my Apple account is not valid for use outside of US and I must switch back to US store to able to do it. How can I switch the account from foreign countries back to US?

    I tried to update the App that I purchased but the message told me that my Apple account is not valid for use outside of US and I must switch back to US store to able to do it. How can I switch the account from foreign countries back to US?

    On your phone (from http://support.apple.com/kb/ht1311):
    Change your iTunes Store country
    Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
    Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.

  • TS1292 Purchased gift cards about a year ago. Misplaced two of them. Found them yesterday, tried to use one today. Invalid. If the money is tagged to the card code why is it invalid? Now have to take photos of both sides and find receipt? Guess out $20?

    Purchased gift cards about a year ago. Misplaced two of them, but Found them yesterday. i tried to use one today. Invalid. If the money is tagged to the card code why is it invalid? Now have to take photos of both sides and find receipt? Finding the receipt might take as long as .finding the cards. If I paid hard earned money for the card from a computer company why would that card not be in their data base waiting to be activated? I guess I am out $20 to Apple for not activating immediately! My account was hacked once so I won't put a credit card in and live with gift cards. Now I am getting hit for $20, two gift cards for ten each. I now question who and how people are making money?? Is my only solution, buy card, redeem code instantly, purchase item?

    Hi Oxfordataloss,
    Thanks for posting. I'm really sorry you've had such problems with BT, it's certainly not the kind of service we would hope to provide. I'll take your comments on board and if you don't receive the final bill as expected please drop me an email with the account details and a link to this thread for reference.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • HT201269 I'm trying to set up my new iPhone using iCloud - I entered my apple ID and password and selected the backup to restore from but the next page asks me to enter a password for a DIFFERENT apple ID

    I'm trying to set up my new iPhone using iCloud - I entered my apple ID and password and selected the backup to restore from but the next page asks me to enter a password for a DIFFERENT apple ID

    What different Apple ID? Yours? Your friends? Your dogs... ? I think we are going to need more information. You're probably best setting up the phone as a new phone and restoring from iCloud later on.

  • HT203180 I purchased a video from iTunes but it will not sync to my iPod.  I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod."  I tried to use the "create an iPod version" but the command is graye

    I purchased a video from iTunes but it will not sync to my iPod.  I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod."  I tried to use the "create an iPod version" but the command is grayed out

    I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
    tt2

Maybe you are looking for

  • Problems with plugging my power chord in to my dv6700 notebook

    This problem has been going on for a while and im just noticing that it is getting worse. when i plug in my power chord into my notebook i have to jiggle it to make the Blue LED go on to let the user know that power is getting into the battery. It ha

  • Getting error in detaching the zones

    Hi I m getting the error while detaching the zone , any one knows wats the solution sbanlab2:sh# zoneadm -z testzone detach zoneadm: zone 'testzone': These file-systems are mounted on subdirectories of /zones/testzone. zoneadm: zone 'testzone': /zone

  • Incident Management in CRM 7.0 - Stopping the SLA clock

    Hi Gurus We're implementing IT Service Desk on CRM 7.0. In our process for logging Incidents, some of our Service Teams are not connected to the CRM system and we've decided to exclude them from the SLA processing. Therefore when we assign the call t

  • Error in source system TD1511

    hello gurus, I have a Infosource name 2LIS_05_QE2, I haved assigned 4 Source System namely (CD1513, GP1590, TD1511, WD1511), It uses a Function Module in R/3 and Appended Structure (I've already transported the FM, Appended DS, Function Group and the

  • Can I use RowSet with Type 4 Oracle Driver

    I am getting following exception when I am using Type 4 Driver with RowSet, but every thing fine with ResultSet. [12/Mar/2002 16:01:02:1] error: ODBC-083: could not load the library <db2cli.dll> configured in the registry for the driver <256> [12/Mar