I'm unable to connect (and the internet is working properly...)

I'm trying to get started with my apple tv and it does not connect to netflix, youtube, etc. I've checked the internet and it is working properly. Can you advice? thanks so much,
Marivi

Check firewall, if you're on wifi then try ethernet to rule out interference. It is likely a network issue.

Similar Messages

  • I just had my logic board replaced. now im having trouble using the interent even with a strong connection and the internet is working on other devices!! please help me :(

    I just had my logic board replaced. i am now having trouble with using the interent even with a strong connection. all other devices are having no problem with the internet. please help

    Test while started in Recovery : if the problem persists, then it likely is a hardware issue.
    Resetting the System Management Controller (SMC) probably won't change anything, but you can readily do it before contacting the repairers.

  • HT204400 I am trying to set up my apple tv and i am unable to connect to the internet because i need to get to an internet page to put in my password. HELPPPPPPPPP

    I am unable to connect to the internet because to log in i need to put in a password and to do that i need to get to a internet page. helppp

    There is no web browser on the ATV, as a result, it cannot be used with such Internet connections.
    Contact whomever provides support for the Wi-Fi service, they may be able to add the ATV to a whitelist to allow it to connect.

  • Curve 9380 unable to connect to the internet via wifi

    I'm using curve 9380 and unable to connect to the internet via my home wifi, there is no blackberry logo beside the wifi signal symbol. I don't have this probelm if I'm using my laptop or curve 8520 to connect to the internet via the same wifi router. Please help. Thank you.

    Check firewall, if you're on wifi then try ethernet to rule out interference. It is likely a network issue.

  • "Unable to connect to the internet, please try again" wifi issue

    I recently recieved my blackberry storm in the mail excited to use the wifi. I set it up including entering the correct security code a number of time for the "wep" security options and it recognizes the network. I believe it's connecting also, but when I open my browser the message of "Unable to connect to the internet,please try again." pops up. I have a verizon account with a data plan, but due to not wanting to use up my data plan I switched it off as only to rely on my wifi. What can I do? I've updated everything and tried so many things. Our wifi has never done this to any other device. PLEASE HELP!

    in the browser, go to the options and setthe default browser as "Hotspot browser" instead of "Internet Browser".
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Unable to Connect to the internet using airport extrteme

    I am unable to connect to the internet using airport extreme It was working fine with my G3 & G4 iBooks but now I am unable to connect. I am able to connect directly to my Desktop connecting directly using ethernet. I am also receiving a strong signal from the airport base station. Please help. Thank you.

    Try the following, in order, until resolved:
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    Modem/Router Power Recycling - Quick
    o Power-off the modem, AirPort Extreme Base Station (AEBS), & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the AEBS; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the modem; Wait at least 15 minutes.
    o Power-on the AEBS; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

  • HT5622 Why am I unable to connect to the internet? I am next to my main computer which has no problems.

    Why am I unable to connect to the internet? I am next to my main computer which has no problems.

    Try the iPad forum, then:
    https://discussions.apple.com/community/ipad/using_ipad
    You'll need to include full details, including the model of iPad, the version of iOS, the exact nature and symptoms of the problem, and what if anything you've tried for correcting the problem.
    Regards.

  • RV042 behind P660 unable to connect to the internet

    Hi,
    I am a bit new to setting up dual wan router. I am currently having a Zyxel P660 Adsl router but rv042 is unable to connect to the internet as zyxel doesn't give it a I.P address. Thank you guys in advance.  

    Hello Rashmin,
    I am not that familair with the P660 but from looking over Zyxel's website it looks like a modem/router combo.  
    Is it possible to place the Zyxel into bridged mode, so that it only acts as a ADSL router and passes the public IP on to the RV042?  You may need to call your ISP to have them do this for you.
    When you are in bridged mode you will also probably have to configure the RV042's WAN port as a PPPoE connection and enter your ISP's credentials, so make sure they give you this when you speak to them about bridged mode.
    With some routers it is possible to plug in another router behind them and everything sort of works.  This is called a double NAT situation, and does prevent VPN from working.  However not even that is working here so I would definitely see about getting that modem into bridged mode.  Some ISPs also call it IP passthrough or one-to-one NAT, just tell them you want a public IP on your RV042's WAN port.
    Thank you for choosing Cisco,
    Christopher Ebert - Network Support Engineer
    Cisco Small Business Support Center
    *please rate helpful posts*

  • My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

    my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
    my iphone4 is 10 times faster
    i have backed up on itunes and restored but still no luck
    even siri is lagging

    my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
    my iphone4 is 10 times faster
    i have backed up on itunes and restored but still no luck
    even siri is lagging

  • Unable to connect to the internet please try again later

    I have a blackberry torch 9800, I don't have a data plan. I use a wifi signal with other phones, but my blackberry doesn't allow me to browse or view apps online.  The error "unable to connect to the internet please try again later" appears.  The phone has a clear signal of the wifi, i've tried various other hotspots, my other phones work perfectly.  The blackberry says it's connected to the wifi, but no internet browsing is possible.  What else can I do other than rip the battery out to re-boot?

    well that sux, are there any alternatives?

  • I can't access to wi fi even though i have a good signal and the router is working properly (my laptop works perfectly)

    i can't access to wi fi even though i have a good signal and the router is working properly (my laptop works perfectly)

    Try rebooting the router and see if that helps. unplug it from power for about 30 seconds and then plug it in again.
    You can also try restarting your iPad. 
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I have a Motorola SB6141 modem that is connected to a time capsule. I am unable to connect to the internet on my laptop and playstation 3

    Ive just switched to a "Motorola SURFboard eXtreme Cable Modem" which is connected to a time capsule.
    I am unable to connect to my internet via. wifi on my Playstation.
    I have already tried many different attempts to connect to the internet. I have tried to directly connect to the internet using an ethernet cable as well as restarting my mac laptop and playstation. I am only able to connect to the internet on my main computer.
    Please help?
    I tried being the most descriptive I could

    I am only able to connect to the internet on my main computer.
    What IP does your main computer get.. ?? Post a screenshot if you can as it helps to see the details.
    When you open the airport utility on the main computer.. click on the TC what errors does it show?
    They will list in the summary.
    What mode is the TC in? If the setup went wrong it might be bridged when it should be in router mode..
    Remember any time to change things around with cable modems you MUST shut down the modem as well.. it cannot change the MAC address of the first item easily so need to be off.. a few minutes at least.. sometimes up to 20min or longer. Make sure the TC captures the public IP on the wan interface.. which is the only way this will work with a pure modem.
    The most recent TC can still have issues.. new AC version TC and AE have the Max amount of issues with SB6121 and 6141.. there seems to be some ethernet issue between them..
    What model TC do you have??
    You can slow the LAN port down or specify the actual speed in the Gen1-4.

  • I have time capsule and I am unable to connect to the internet using static public IP

    I have been using my Time Capsule on my company network for some time.
    Recently I removed the time capsule and connected the TC  Wan port directly to the firewall.  We have got block of static IPs provided to us from our ISP.
    Im confused in filling up the internet tap on the Airport Utility (Lion Version)
    If Im using a static public IP to connect to the internet should I use
    Static, DHCP or PPoe?
    IP Address: is this the IP address of the public IP address given to Us from ISP?
    Subnetmask. ..no problem
    Router Address: what should I type here: IP address of my firewall or my ISP's GateWay IP?
    DNS servrs are clear...
    Please guide me.

    Normally you would just set this up with dhcp to the firewall.. if the firewall is setup correctly it will simply pass you one of the block of static IP addresses.. if it doesn't or get a NAT address you should be able to allocate a static IP to the TC in the firewall to its MAC address.
    I am not sure that the static IP will work if you just type it in.
    If you want to have a go..
    If Im using a static public IP to connect to the internet should I use
    Static, DHCP or PPoe?
    Try static only if dhcp doesn't work because the firewall is not setup.
    IP Address: is this the IP address of the public IP address given to Us from ISP?
    Yes, a free IP from the block.
    Router Address: what should I type here: IP address of my firewall or my ISP's GateWay IP?
    Either should work if the firewall is setup correctly.. otherwise just try ISP gateway.

  • I am unable to connect to the internet, there is a pop-up that says "We're sorry, but the Safari browse version you are currently using dos no support the community toolbar". My computer does say that it is connected to the internet until I open Safari.

    I am unable to connect to the interent. At the top of the screen my computer says that I am connected. When I open up Safari there is a pop up that say "Community Toolbar          We're sorry, but the Safari browser version you are currently using does not support the community toolbar" and when the Safari page opens up it says "You are not connected to the Internet. Safari can't open the page .... because your computer isn't connected to the Internet." I have tried Network Diagnostics and tried to reset Sfari, empty Cache as well as deleted all of my interent history. I am unable to use Time Machine because I never set it up. If someone knows how to help I would very much appreciate it!!

    Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085

  • I have a 5th generation iPod touch that is suddenly "unable to connect to the server", not entirely sure what this means but I'm unable to connect to the internet even though I'm connected to Wifi. Can't connect to iTunes on my pc either. Any input?

    I have a 16GB iPod touch that suddenly stopped connecting to the internet last night. Everytime I try to get mail, or access anything with Safari I get a message saying that it can't connect to the server. Also I've plugged it in to my home computer but it won't connect to iTunes either. I haven't updated to iOS8 yet as I didn't have enough space for it and I had planned on deleting all my music files, updating the software and putting whatever music I could fit back on to the device afterward, but now I'm hesitant to do that as I have no way to get any of the files back onto the device. Could this be because I haven't updated to iOS8 yet? I've been having other problems such as apps crashing unexpectedly lately as well, for example my music shuts off randomly and apps such as Twitter and Tumblr and a few others crash on launch. I'm definitely not a genius when it comes to technology by any means, so I have no idea what's causing this problem or how to fix it, any help would be greatly appreciated!

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Pismo with Tiger won't go into target disk mode

    I recently upgraded my Pismo to Tiger and can't seem to boot into firewire target disk mode. The computer restarts and gives me a terminal screen that reads: "can't OPEN DISK" and then goes on to say "Welcome to Open Firmware. To continue booting, ty

  • Fax and Scanner on rds

    I have a RDS Farm on windows 2012 servers. I want to use fax and scanner application. How can I Install it.

  • Cutomer theme is not working properly

    HI, we have upgraded our portal version from EP6.0 sp 9 to EO 7.0 SP9. after upgrade customer theme is not displaying properly. like tabs ,font size are displaying with improper format. can any one tell me what needs to be done. But SAP standard them

  • Not working curve8520

    Dears,please help My BB curve  is 8520 is not powering on when i tried to connect with computer/charge the led is lighting and the batter symbol is showing with a red cross mark on screen,Please help. Solved! Go to Solution.

  • Change Date Format in MSDS report

    SAP EHS expert: I would like to change Date Format when printing MSDS in different languages. For example, print date in MM.DD.YYYY format when printing MSDS in English, but print date in YYYY. MM. DD format when printing MSDS in Chinese.The Generati