I'm unable to connect to any network and not sure why

My iPad and other devices connect just fine but all of a sudden my MacBook pro just stopped and I've played with the network settings many times.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/16

Similar Messages

  • Unable to connect to any network

    Ever since I moved I cannot access any wireless network in the area while other computers can. Please help.
    I have a Toshiba Satellite A110-260 with Windows XP Home Edition with Atheros AR5006EG Wireless Network Adapter.
    If there is any information I left out which are necessary tell me and I'll add it

    You mean, you moved to another house/flat and afterwards your wireless did not work anymore? Did you changed some software or updated some drivers?
    Which service pack is installed on your machine? Would be interesting to know.
    Otherwise I would recommend you to set everything on the wireless access point to default and activate DHCP which automatically assigns an IP adress to your machine. You should also set everything wireless related on your computer to default and make sure that the wireless card is properly activated (check if the little switch is slided to "ON").
    Greets

  • TS1292 i am unable to use my card the code is being blocked and not sure why

    i have tried to use my card and am not able to please help?

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Why can I connect to my home network with my iPhone 5 in one room, but when I move to another it is 'unable to connect to the network'

    At home, I can connect my iPhone 5 to my home wifi network with no problems, as long as I stay downstairs.
    As soon as I go upstairs my phone disconnects from the network. I can still see the home network it in the available network lists (with full signal strength), but when I try to reconnect I get an 'unable to connect to the network message'
    If I move back downstairs it reconnects
    This has only started happening in the past week or so
    I've tried to forget and rejoin the network, but this doesn't work
    I reset my network settings on the phone. This worked for a couple of hours and I could connect to the wifi upstairs, but now it won't connect again.
    Does anyone have any ideas what is causing this?

    Sounds like your wi-fi signal strength has degraded.  Try rebooting your wi-fi router, or get it serviced.
    Do you have similar issues with any other wi-fi routers?

  • HT4623 unable to connect to any wifi

    unable to connect to any wifi

    Did you already follow the troubleshooting in these articles?
    iOS: Troubleshooting Wi-Fi networks and connections
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    iOS: Recommended settings for Wi-Fi routers and access points

  • Message "WLAN: Unable to connect. Wlan Network not...

    Well guys i bought my nokia 5800 today so like any other curious people i looked the wi-fi hoping connect with the internet and when i try to connect with the wi-fi appears this message "WLAN: Unable to connect. Wlan Network not Found." and then it dosen´t connectbut he finds normally the networ and this message appears after i type the Router password.i´ve already looked in another foruns and i´ve already switch off the Option Qos in my router and the problem cotinues, so anyone can help me?my router is one linksys wrt54g and the type of connection is static ip an the security is Wpa Personal TKIP....
    PLEASE ANYONE CAN HELP ME?I´D BE VERY GRATEFUL WITH THE SOLUTION FOR MY PROBLEM...
    Thanks 
    Message Edited by darkcraft on 13-Jul-2009 09:47 PM

    tomasvaril wrote:
    Same To me. I have Asus WL-500W router at home, WPA2-PSK(AES), password similar to this "lIGf@91pY0TnFY!Jh@7LjTUlsL3ZPY", MAC address filtering. My old Nokia E51 works, my Touch Pro Works with it. When i try my one day old Nokia E72 it does not work, the same like others:WLAN: Unable to connect. Wlan Network not Found. E72 works at my work wifi, which has the same settings but without mac filtering. Have no idea what is happening, all is setting correctly. MAC address of E72 is allowed on router. It has the same settings like E51, but E51 works like a charm E72 does not work. What is wrong?
    As already suggested, you could try disabling the MAC filtering from the router, just to outrule possibility of a typo while entering E72's MAC address to router settings.
    Have you tried swithing a WLAN channel that your router uses?
    Log in to your router's web management pages (check router's default IP address and username/password from it's manual) and switch of the "Automatic" channel selection mode. Try few different channels, like 1, 3, 6, 9, 11, if one of the channels happens to work any better. Note that in case you have set your router to use channels 12 or 13 (or in case "Automatic" channel selection mode has decided to select channel 12 or 13) you must have a SIM card inserted and some other than "Offline" profile enabled on your phone since Offline mode (i.e. airplane / flight mode) won't allow your phone to operate on higher channels than 11.
    In case you have configured your WLAN network (SSID) to be "hidden", try disabling hidden SSID mode on the router.
    Asus WL-500W router seems to be a pre-standard 802.11n device so might be worth looking in to your router's WLAN settings and see if playing around with router's WLAN operating mode and settings improve the situation. First of all ensure that your router is not set to operate in 20/40MHz mode (set it to 20MHz only) assuming that the router is in default 802.11b/g/n mode. You could also try disabling the 802.11n mode completely by selecting a 802.11b/g mode (if available).
    You should probably also check that you're running latest (2.0.0.6 ??) firmware version on your Asus WL-500W router since there seems to plenty of complaints regarding WLAN connectivity and stability issues (in general, not specific to Nokia handsets) with this particular router model.

  • TS1398 Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

    Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

    When Access Connections fails to connect it asks if I want to configure the network and there's a bunch of settings. Connection type: infrastructure or Adhoc, Wireless security type "use static WEP keys", "Use Wi-Fi protected Access - Pre Shared Key (WPA-PSK)" - I choose it and under Properties there's more options. Access point authentication, WPA-PSK or WPA2-PSK; I've tried it both ways. Data encryption: TKIP or AES, I've been using TKIP. Under Pre-Shared Key, there's the only box I see to enter a password, so I enter the password there.
    Chances are pretty good that the problem is the network configuration of your PC and not the AirPort Extreme Base Station (AEBS). What configuration options you choose will depend on how you set up the AEBS's wireless network, but the following can be used as a guideline:
    o Connection Type: Infrastructure
    o Wireless Security Type:
    AirPort Setting = PC Setting
    o WEP = WEP
    o WPA Personal = WPA-PSK w/TKIP
    o WPA2 Personal = WPA-PSK w/AES

  • Unable to connect to any wireless internet

    laptop not supported any dongal to connect internet where as device connected other laptop. If i connect with Hot s[pot then its connected so request you to help on this & suggest what should i do.  shoud i format ?

    Hello @James0007,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook computer is unable to connect to any wireless network. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

  • I Just updated my iPhone 4 tp 7.1 oS. I am unable to connet to any network. I keep getting the "searching" Np Service" messages on the top let corner of the screen. I also get a notice that say " "unable to load network list. I need help...

    I Just updated my iPhone 4 to 7.1 oS. I am unable to connet to any network. I keep getting the "searching" No Service" messages on the top let corner of the screen. I also get a notice that says " "Unable to load network list. I need help... How can one resolve this issue?

    No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
    As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

  • I'm unable to connect to any AOL servers using Mail.  Other computers, iPhone, iPad all connect successfully.

    Hello everyone,
         I have been working with AOL for about three months now with no end in sight.  I purchased a MacBook Pro in late September and attempted to use Mail (later Outlook with the same results) to download my Gmail and AOL email.  I confirmed all the settings were correct for both accounts and began downloading email.  Once completed, I noticed only my Gmail had downloaded and AOL stated it was unable to connect to any of the servers.  I engaged AOL and they've been making me try random ports, deleting profiles, etc.  Nothing was worked.
         I am looking here in hopes someone knows something since I'm able to access AOL email via the web, using my iPhone's Mail app, my iPad's mail app, and two of my Windows laptops.  Only my MacBook Pro with Retina Display (Mid-2012) has issues.  I'm running Mountain Lion 10.8.2 with all updates.
         Tried using telnet but get "connection refused".  No firewalls are running.  I thought maybe it was the OS itself so I installed Office 2010 on Windows 7 in Fusion and Outlook gives me "an encrypted connection to your mail server is not available".  This is a clean install with no firewalls, AV, nothing.
    In both Windows on Fusion and my Mountain Lion, Outlook and Mail successfully connect to Gmail's IMAP servers but fail to connect to AOL's POP or IMAP servers.
    Any ideas?
    Thank you in advance.

    Thanks for this.
    Before I see your suggestion, I did it below that worked well:
    - SIgn off the Mac App store (if you were signed in with another Apple ID)
    - Leave the Mac App store open
    - Quit iTunes and iBooks if they are running
    - Open Safari, and go to Preferences/Privacy
    - Choose to block cookies "Always"
    - Click on "details" under "Remove all website data ..."
    - Search for apple.com; select the "apple.com" line then click "Remove", then click "Done"
    - Quit Safari
    - Open Activity Monitor (search for it using Spotlight or find it in the Applications/Utilities folder)
    - In Activity Monitor, search for "storeagent". You should find "storeagent" and possibly "ibookstoreagent"
    - Select each of them and force quit them (using the X in the toolbar if you are using Mavericks)
    - In the Finder, go to the ~/Library/Cookies folder (go to ~/Library using the "Go" menu while pressing Alt then open the Cookies folder)
    - Delete   "com.apple.appstore.cookies"   and empty the trash.
    - Go to the Mac App Store and sign in. This should work. You can press Esc if asked for your username and password a second time.
    - Go to Safari, then Preferences/Privacy
    - Choose to block cookies "from third parties and advertisers"
    - Go back to the Mac App Store. You should be able to use it "normally".
    Some steps might be overkill, but it seems to work for me now.
    Anyway, thanks!!

  • Why isnt my itouch not connecting to the wifi? everytime i try to conncect to a network and then i put in the password, it says unable to connect to this network! why is not working?????????? someone please help me!!!

    Why isnt my itouch not connecting to the wifi? everytime I try to connect to a network and i put in the password it says "unable to connect to this network" why isnt working?! the password is correct and everything. I just dont understand why its not working. Someone please help me! thanks

    Did it ever work with this WiFi system?
    Do other devices work with this WiFi system?

  • Unable to connect to any secure sites with any browser

    I am unable to connect to any secure sites. I downloaded Firefox with the hopes that it would fix the problem but it did not. What ever browser I use I cant connect to any secure sites. All of the other pages load correctly.
    I have a PC notebook that I tried to load the same sites it worked fine, so I know that it is not a connecting problem.
    emac Mac OS X (10.4.6)
    ibook   Mac OS X (10.2.x)  

    Are you connecting via dial up or high speed through a router? If that latter, check the firewall settings of the router. I have my router set to medium (high, medium, low, & none) and it works most of the time. But occationally I get to sites that won't load and setting the router (temporarily) to low usually allows me to access those sites. So perhaps this is your issue.
    I think there are ways to add those sites to router security lists or "services" that will now let them through with the higher security settings, but I need it so rarely I haven't bothered to figure it out yet.
    Patrick

  • Unable to connect to home network (WPA2-PSK, works on Windows)

    Hello!
    I am having problems with connecting to my home network (on a FRITZ!Box Fon WLAN 7360 SL) which uses WPA2-PSK encryption.
    Windows works normally so I don't think that it is a router issue.
    In addition, I managed to connect to my Universities WPA2 network and another unsecured network without problems.
    I tried netcfg+wpa_supplicant, wpa_supplicant on its own and wicd (on a sidenote, wicd didn't even manage to connect to the router when using a cable). None worked.
    This is the wpa_supplicant conf file that I am using:
    ## wpa_aachen.conf
    ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
    ap_scan=1
    fast_reauth=1
    network={
    ssid="myssid"
    psk=hexcode
    proto=WPA RSN
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    I am getting an "authentication timeout" error everytime I try. Yes, I double and triple checked the passphrase. I also tried it via hexcode and plaintext passphrase.
    Does anybody have any suggestions?
    Last edited by lorizean (2012-10-14 20:59:49)

    Ive been trying the same thing for several hours googling it etc. wicd doesnt work always ends up with bad password error no matter what..
    so.. this worked for me:
    get into term as root and type:
    NetworkManager start
    then it will pop up in the notification area click network settings / wireless /connect to hidden network and type name, pass and it connect just fine..
    really simple and it works

  • I had no problem connecting to my network and now all of a sudden I can't connect.  Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss.  Anyone else have that problem?

    I had no problem connecting to my network and now all of a sudden I can't connect my iPad.  Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss.  Anyone else have that problem?  I've gone thru all my settings and can't seem to find a way to log into my network.  Don't get the option to put in my password.  It just give me the name of my network and option of dismiss instead of password.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

Maybe you are looking for

  • GR PRINTOUT

    Hi Experts, We have developed two smartform programs for Goods Receipt of Purchase Order and Stock Transport Order. The movement type remains same for both these transactions i.e 101. We've already Created two Output Types namely ZWE01, ZWE02 and ass

  • Recovery of R100 from CF PCMCIA Card?

    I have an R100 and its original recovery disks.  I do not have the PCMCIA-based cd rom drive that the R100 will use with those disks. The BIOS supports booting from PCMCIA and I can boot a basic linux environment from a Flash card there. I thought ma

  • Runtime environment for the production apex instance

    My first goal is to export a full application from a full development environment to a runtime environment. The two environments are on dedicated servers. From Oracle Application Express documentation and Oracle Application Express Forum, I realized

  • Is there a web site I can get free video to download & work on my

    PPro3 skills

  • Robohelp 10 crashes

    Robohelp 10 crashes (runtime error - Visual C++ - runtime library) when I select printed documentaion.  Macros are enabled in Word.  Anyone have similar problems?