I'm unable to load my Microsoft Exchange account.  Think I'm entering the wrong info for domain and user but haven't figured out the correct inputs...

I think the problem is with my domain and user name information.  Does anyone have any suggestions...

I know that when i tried to add a Live/Hotmail account I tried MS Ex but ended up having to forward my Live to my Gmail or just add an IMAP account.

Similar Messages

  • I have over 10,000 songs that I have copied from my vinyl and tape libraries. I was able to use all of them until I loaded IOS 5.0. I can see all of them on my phone and PC, but most are greyed out on the phone. How can I use all of my music.

    Let me know if you have any answers.

    I did not upgrade to the newest version of Itunes on my PC.  I just now went to my Library were Music is listed. Under that is Movies, TV Shows, ItunesU, etc.  When I opened my music list, each song was in numerical order.   If I have the songs listed alphabetically, they are in numerical order.  If I change my listing to album or whatever, the first song is listed in numerical order just as I showed in my original question.  They are also numbered on my Playlists.  I have my favorites in two different playlists.  One of them was minus a song.  I was able to see which one was missing because they were in numerical order.  I know I could have just copied to correct one into the incorrect one and just skipped the duplicates, but I chose to do it this way.
    So, the songs are listed numerically in my music folder under Library on my older version of Itunes.  But, on my newer version, they are not listed numerically under music.  Maybe I'm doing something wrong?????
    Thanks so much for your help.  I wish they would just leave things alone.  I would gladly go back to the older version on my other computer, but???? 
    Again thanks. 
    Marie

  • I can't connect apple mail with a microsoft exchange account

    Since 3 days ago my microsoft exchange account can't be connected from my apple mail

    Hey there ovillamil,
    If you are having issues connecting with your Microsoft Exchange account, take a look at the resources below for troubleshooting steps:
    OS X Mail: Using Microsoft Exchange (EWS) accounts - Apple Support
    https://support.apple.com/en-us/HT201951
    iCloud: Microsoft Exchange behavior with iCloud - Apple Support
    https://support.apple.com/en-is/HT202375
    Microsoft Exchange may require additional configuration in order to allow communication with certain devices. Consult with your IT manager or Administrator of your Exchange server for further questions about your Exchange setup. 
    Regards,
    - Judy

  • SharePoint Online : Unable to load type Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException required for deserialization.

    From today's morning , We are having Issue on Our Online SharePoint Site.
    Each WebPart is not loading and displaying this Line
    Unable to load type Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException required for deserialization.
    Please write in quick response to fix it at
    [email protected]

    Hi,
    According to your post, my understanding is that SharePoint Online Site was unable to load web part and got the “Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException” error.
    Per my knowledge, the SPUpgradeCompatibilityException occurs during upgrade when the front-end Web server attempts to connect to an incompatible database.
    Please check whether the database is compatible.
    Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
    Office 365 forum
    http://community.office365.com/en-us/forums/default.aspx
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Tried to sync iPod Touch, noted "new" iTunes. iPod won't sync ("iTunes is unable to load data class information from Sync Services"). Tried the fix, but iTunes hangs when I try to open Preferences.

    Just tried to download new audiobooks to my iPod Touch 3, and noted new iTunes. iPod won't sync ("iTunes is unable to load data class information from Sync Services"). Tried to Reset Sync History per Support Article, but it didn't work. My purchased audiobooks are also gone from my iTunes Library.  Any fix, or is my best bet to uninstall new iTunes and reload earlier version??

    http://support.apple.com/kb/TS2690
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • TS3297 "iTunes was unable to load data class information from Sync Services." What is this solution for the new phone to sync up with my iTunes acct?

    "iTunes was unable to load data class information from Sync Services." What is this solution for this new phone to sync up with my iTunes acct?

    Hi tadhunt,
    Here is an article that directly addresses that error message:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/ts2690
    I hope this helps!
    - Ari

  • The Microsoft Exchange administrator has made a change that requires you to quit and restart outlook.

    Then I get this once outlook is open:
    Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. The operation cannot be performed because the connection to the server is offline".
    Outlook 2013 client
    Exchange 2010 SBS
    I have recreated the profile, doesn't work. Recreating the OST doesn't work. Starting Outlook in any safe mode doesn't work. Disabling hardware acceleration and add-ins does not work.
    repair account does not work -  I get the Congratulations message, confirming it was able to get everything from the server... and when I restart Outlook:
    "The Microsoft Exchange Administrator has made a change that requires you to quit and restart Outlook".
    BJN
    Also the user in question is not getting new mail.
    And I have tried this
    outlook /resetnavpane to no avail.

    Hi,
    Please confirm if the issue happens to all users in your Exchange server.
    In client side, please check the Connection Status when the issue occurs:
    Please open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar –Connection Status to check the connection.
    Please notice the Server name, status, protocol and Type information.
    In Exchange server, please check whether all Exchange services are started and running in Exchange 2010. Also check whether there is any error information in Event Viewer.
    If the issue only happens to one user, please update the Outlook client with the latest patches and service packs to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • I have a brand new macbook with microsoft office loaded. I set outlook as the default mail. i would rather go back to mac mail but can't figure out how to do it. any ideas?

    I have a brand new macbook with microsoft office loaded. I set outlook as the default mail. i would rather go back to mac mail but can't figure out how to do it. any ideas?
    Thanks for any help
    Lou

    I have a similar problem: I switched from mac mail to Outlook 2011 as the default client, and want to switch back. Mailto links (eg from browser etc) default to Mail.  However, when I try to email a Word document as an attachment, it continues to open Outlook.  Outlook has a button in its prefs for making it the default client, but I don't see a way to turn this pref off in either Outlook or in Word.  

  • Can't verify my microsoft exchange account

    Hi there,
    I have used microsoft exchange email for university which worked with my iphone 4 no problem.
    My work have created a microsoft exchange email for me and I have followed the steps on instructions however it repeatedly tells me "cannot verify account".
    I don't know what this means or what to do about it. I am following the instructions verbatim.
    Any help gratefully appreciated.
    Rich

    I am setting up a new mail exchange on my Iphone5s and it will can't validate. I have verified with all in my office that I have entered the  correct informaiton. Yet it still does not verify the account. I have done everything you listed and verified my creditals are correct. Is there anything else that can be done?

  • MS Outlook 2013 Error message "The microsoft exchange administrator had made a change that requires you to quit and restart outlook"

    I am currently running 2 HP Servers, SAN Storage. I have Exchange 2013 installed and MS Outlook 2013 randomly appears with the message
    "The Microsoft exchange administrator has made a change that requires you to quit and restart outlook" It is happening very frequently and is appearing every few seconds on a lot of users.

    Hi WeeMac22,
    If you migrated from Exchange 2010 to Exchange 2013, I found a KB for your reference:
    Outlook 2013 cannot connect after an Exchange Server 2010 mailbox is moved to Exchange Server 2013
    http://support.microsoft.com/kb/2934750/en-us
    If not, I suggest using OWA to verify whether this issue remains.
    1. If everything works well in OWA, it seems an issue on the Outlook client side.
    I suggest run Outlook under safe mode to avoid some AVs and add-ins.
    I suggest re-create profile to refresh the caches.
    I suggest re-install the Outlook if all methods above not working.
    2. If this issue remains in OWA, please verify whether all users on the Exchange 2013 have this isse.
    If only one user has this issue, I suggest create a test user to check whether the test user has this issue.
    If the test user works well, I suggest try to re-create the specific user account.
    Please make a full back up before re-creating.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Microsoft Exchange administrator has made a change that requires you to quit and restart Outlook.

    guys we just did the exchange migration from SP3 RU6 2007 to exchange 2010 SP2 , and moved the mailboxes , but few users are getting the prompt saying that -
    Microsoft Exchange administrator has made a change that requires you to quit and restart Outlook.
    So what best can we do to fix the issue. Apart from creating the new outlook profile i know that can be done but to get deeper is anything related to CAS Arrays preferred site enforcement.
    Thanks

    Hi,
    Once you moved the mailboxes from older version to new version Exchange RPCClient access Point will change as per new database settings, so users normally get the popup saying that "Microsoft
    Exchange administrator has made a change that requires you to quit and restart Outlook", so user has to restart the outlook to update the new configuration.
    If its taking long time that you have to check the autodiscover URL which is configured in Exchange 2010 and Exchange Replication service these services are responsible
    to update the new configuration in client.
    Also if users are different location (AD Site) it will take some time to replicate.
    I hope there won't be any issues for client due to this popup.
    Regards
    Ganga Enterprise Messaging Administrator-Exchange 2010. Windows 2008 Active Directory Configuring.

  • The Microsoft Exchange Administrator has made a change that requires you to Quit and restart outlook in Exchange 2013 CU3

    I have a Exchange 2013, That has been running for a few months now since we moved it over, but now I get the Microsoft Outlook Message "The Microsoft Exchange Administrator has made a change that requires you to quit and restart Outlook." It only
    shows up on certain users but not on others. What could be the problem? The only answers I have seen are for Exchange 2010.
    All Help is much appreciated

    This one? http://support.microsoft.com/kb/2934750

  • TS4532 My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange using the web browser. The connection worked until IOS 6.1.2 was Install

    My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange with the same parameters using the web browser.
    I bought the phone when it came out last October. The connection did not work at first, then started without warning in December. It worked perfectly for 2 months then stopped again when IOS 6.1.2 was Installed.
    Help please!

    I have forwarded these questions about the version of Exchange server that is being used and whether Microsoft host the mai themselves to the IT Dept but I will not get a reply from them until tomorrow.
    In the meantime I have also tried:
    Deleting and re-creating the account AGAIN!
    And re-setting the phone (recommended as a solution to a similar problem with an iPad in another forum.
    But please remember that:
    The phone would not connect for 2 months after I bought it
    Then started working unexpectedly in December
    Then stopped working again when IOS 6.1.2. was installed
    Also why am I the only person affected by this when colleagues with iPhone 3s and 4s who use the same mail system are not (I am still trying to find one with an iPhone V to see if their's works).
    Like I said I think that there must be a fault, either with my own phone or with iPhone Vs in general.

  • Eversince installed Mountain Lion, i can't receive emails from my Microsoft Exchange account!! Why is this so?

    Eversince installed Mountain Lion, i can't receive emails from my Microsoft Exchange account!!
    Why is this so? I don't have this problem prior to installing the Mountain Lion OS X

    Have you tried 10.8.1?  It includes fixes in this area.  Usually the problem is if Active Directory is returning incorrect Exchange information in response to an Autodiscover request.  In 10.8.1 you can manually edit this information.

  • Auto Signature - Microsoft Exchange Account

    Dear Experts,
    I use a Microsoft Exchange Account on Q10 - The issue is that I have to separately set auto signatures in my device. I would like to use the same auto signatures as configured in the Exchange Account, so that I don't have to separately set up in the device.  Is this possible?
    Regards, Ajay.

    Copy and paste them from one of your emails into the Signature settings for the account. There's no way to automatically link them, to the Exchange account signature.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Maybe you are looking for

  • Production order confirmed quantity

    hello! can i change the settings, that production order atp-check confirms quantities from e.g. purchase requisitions, not only stock in warehouse? best regards, matthias

  • Send Port to internally hosted IIS web service needs to run on the SAME IIS SERVER from multiple orchestrations

    Hi We have a multi-server BizTalk environment. We have an Orchestration with multiple call orchestrations in it. Each called orchestration is calling a web service through a 2 way Send Port (which is hosted in IIS on each BizTalk server in our multi

  • Abap-Class-Event in Wait Step

    Hi guys, in my workflow i have an activity with an abap method. This method works like a dialog. This means, i get a workitem in the business-workplace which shows a webdynpro where a pdf is displayed and where i can choose whether i click on button1

  • Simple EJBQL query

    I am trying to execute the following query. SELECT OBJECT(e) FROM Employee e WHERE e.lastName = ?1 AND e.firstName = ?2 AND e.birthDate = ?3 But It is always returning FiderException, although the record I want to search exists in DataBase. ? What co

  • Recompile Java class on middle tier

    <br> We have a requirement where we have to disable Seeded EmployeeName LOV on the iexpense page but there is hard coded validation in the AMImpl class file. I cant bypass it. So I want to comment the lines which does the validation. But I am unbale