I'm unknowingly getting logged off.

Okay, I have read through pages of posts, I've even made the 443 change. So far I haven't read anything that has helped.
While I am logged onto iChat, I randomly get disconnected but it doesn't show that I have been until I've sent a few messages. Then it will show me some error message or say that I'm disconnected. Sometimes I can go hours without this happening, sometimes it happens several times in the matter of minutes. I can't even get a decent conversation at times, because I don't know I'm disconnected. To me, it appears that the person I'm talking to just hasn't said anything. But to them I have disconnected in mid conversation, which usually confuses them.
Also while sitting there it will log off/on and at times set me back to available when I have put up an away message. This also causes trouble because I have people talking to me thinking they are being ignored.
I even disconnected my Airport Express, and went "wired" and it still didn't help. So I know the wireless part of the equation isn't it.
I am on a second router, but I do not know, nor understand how it works. My connection goes as follows. Cable into house, into ISP's modem, into store bought "wired" router. And like I stated, one cable goes to my Airport Express, which I use, but I took the cable out of that and plugged it into the computer directly, and it still had the problem.
So if anyone smarter than I, has any suggestions or fixes, let me know. It's been a month with my new computer, and I'm sick of it.
Thanks in advance...

Hi,
You will now need to follow these instructions if you have one computer.
http://portforward.com/english/routers/port_forwarding/Linksys/BEFSX41/iChat.htm
The Instructions do say that you should ideally set up Static routing.
This means turning Off the DHCP server bit in the Linksys and setting the Mac to Manually use an IP.
(You will need to gather info from the Linksys about it's Own IP (which you know anyway), the Subnet Mask being Used (this may appear on the mac as well) and the DNS Servers and entering them in the relevant place in System Preferences > Network on your Mac.)
If you have two or more computers it will be best if you Port Forwarded to the Airport (setting that to Static ) and then allow the Airport to do DHCP (Share An IP)
12:04 PM Sunday; March 9, 2008

Similar Messages

I keep getting logged off of Revel two seconds after I log into revel. What going on?

I keep getting logged off of Revel two seconds after I log into revel. What going on?

Hi Trevor
Can you tell me what device you are using, what operating system, and how recently you updated the app?
Pattie

Keep Getting Logged Off

I keep getting logged off with this message:
172.16.0.4 in use by 00:1d:4f:f5:02:79, DHCP Server 172.16.0.1
anybody know what this means?

yep.
You have either two computers or a computer and router trying to use the IP 172.16.0.4
You will need to find out which one and change one of the devices to something else
10:04 PM Tuesday; May 27, 2008

Users getting logged off

In WLS7.0 cluster we do not have in memory replication turned on.Once in a while some of our users get logged off while working in the application even when both servers in the cluster are running.
          Can this be the cause of not having in-memory replication?
          Thanks
          Anil

In the past when I ran in this sort of problem it was one of two things,
          1) The plugin failing for some reason (Apache, IIS or Netscape) so if you use a plugin have a look at its logs, it may help.
          2) Java script in the application code that flipped between https and http (buggy code).
          Good luck.

Why do some users get logged off after 5 minutes?

I havde a few users on one machine and they get logged off every 5 minutes. Is this a licensing thing?

Check System Preferences/Security & Privacy/General/Advanced to make sure a log out time hasn't been set up.

Reason that people get logged off in one location after 5 minutes

Hello
I wander what could be the reason that people get logged off in one location after 5 minutes regardless having parameter "rdisp/gui_auto_logout" set to "14400".
Could this be something in SAP?

Hi,
I faced a problem like this in a client and the problem was at the firewall, probably is not the same in your situation but does not looks like an auto logout from SAP system. What kind of connection do you have with that location? is the same in all others? is the same connection hardware used? GUI version are the same?
Have you tried using niping program?
Good luck,

I occasionally get logged off a game or website ,IPad goes to home screen(

Why do I get logged off and sent to home screen without wanting to log off .

1. Double-click the Home button to close all Inactive Apps in Task Bar
2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
3. Tap the minus sign to close Apps
4. Tap center of screen to return to Home Screen
5. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

I keep getting logged-off involuntarily

Something I've noticed lately that's annoying:
I find myself having to re-log-on repeatedly when I'm following discussions. It does not necessarily have to be a next-day thing. I find I can be involuntarily logged off in a matter of a couple hours or even minutes.
What's wrong?

Aloha bob
Please don't misunderstand, I am NOT complaining about anything - especially anti-SPAM efforts. I have solved most all the problems that initially bugged me and tolerate the rest with the British stiff upper lip - even though my heritage is Irish
RE: the AutoReLoad methods... I am positive that the varmints new about it LONG before I did. I just researched it cuz I didn;t like gettin logged off after the BigSwitch. What? Has it been 2 months? If I thought I was lettin the cat out of the bag in any way I wouldn't have said a word. That said, IMHO, I really don't think time-out is designed to combat SPAM but to combat theft using other folks AppleIDs ("unattended devices in public places") - very good for that and agree whole-heartedly.
RE: THE post! Wow! What a discussion! I have to admit that I scanned most of it - but I'm a pretty good speed reader. The best suggestion was the simplest = https://discussions.apple.com/thread/6257026#25877879 and Demo's response right after = 0 points, LONG timer - 1+ points, NO timer. If there is already a 30 second timer, then make it 10 minutes - 30 minutes - 60 minutes - 3600 minutes!. Just for OPs. That would drive 'em nuts!
Still, best is to modify the 7 words you can't say on TV feature to automate sandboxing posts/replies to facilitate the Hosts' dirty job. Databases are very neat if one utilizes them properly.
Buenos Noches bob....... (et al)
CCC

Account getting logged off and unable to sign on?

Hello. I have this problem for over 5 months now and its crap.. What happends is i just make a new account and the next day its signed offline and its unable to sign in.. I have this problem with over 25 accounts. I will get signed off randomly and its unable to sign in tryed to contact skype support they ill just ay unable to verify. If someone can please help me that would be awsome thanks.

OK..
since i wasnt able to make any connection with the bluetooth or the wifi, i downlaoded bluetooth programs from itunes(BTShareFree, PhotoShare, i think ether of these would work), i synced it to my iphone, started it and tapped connect. It asked me if i want it to turn on the bluetooth and search-i said yes and left it aside for a while. After ~5 mins i took the phone in my hands again, minimised the program went to settings and there i was able to access the bluetooth and saw the toogle. I rebooted the phone and it was fixed. I was able to manipulate wifi and bt again.
P.S.the first time i did this, i tryed to set the bluetooth to "off" state but it showed the loading ring again so i restarted the bluetooth app i synced before and did the same procedure(went to settings and had the bluetooth toogle in final position[on]-not in loading state). After this i went to General>Reset>Reset Network Settings. After the phone rebooted they were "stucked" again so i did the same procedure again and did the same i wrote above. It work as a charm. I wasnt able to stuck it again so i can record video tutorial, hope this was helpful-if u have any questions ask here, if i can help im gonna try. Hope u fix it too,
cya.

Automatically gets logged off

When I type my username and password and log in normally it opens Skype for a couple seconds then closes it then it says "you have been logged off. "

http://heartbeat.skype.com/2014/09/i_keep_getting_signed_out.html Open your Skype account settings page: https://secure.skype.com/portal/account/settings If your Skype account is linked with Microsoft account, then try to unlink them. https://support.skype.com/en/faq/FA12211/how-do-i-unlink-my-skype-and-microsoft-or-facebook-accounts

I keep getting logged out when navigating lengthy threads on my website.

Each time I try to navigate off of a lengthy thread on my website I get logged out.
It often happens when I try to submits posts also.

'''PLEASE HELP!'''
This is OP again.
Can someone at least point me in the right direction?
Would it be:
A browser problem?
A computer problem?
A website problem? (issue with FUD etc.)
I am using a dial up service *sigh* and I keep getting logged off more frequently
than ever.
Like nearly ALL problems I have it's most likely a setting that I have screwed up.
Your help would be much appreciated.
Thank you

OEM - errors and logs off automatically

I am using OEM 10.2.0.3.0 - with Adobe SVG 3.0, Windows Vista and Java jdk 6 update 17 - the problem that I am having is OEM will log off with this error --> unrecognized DOCTYPE declaration Image might not display correctly.
Does anyone know how I can resolve this issue - I get log off abruptly about three times per day.
My co_workers are using the same setup except they have java jdk 6 update 7 and don't have the issue.
Edited by: user10449670 on Mar 18, 2010 8:50 AM

I have changed all my environment to match my co-workers - IE Version 8.0.6001.18882, adobe svg 3.0, flash player W 10,0.45,2 JDK 6 up 7, OEM grid 10.2.0.3.0 The only things that I changed from my co-workers is I updated my flash player version and went from jdk 6 update 17 to 7. I am not getting the unrecognized doctype now but it is logging me off of grid when I exit MS sharepoint in my browser. It seems to have settled down the issues with automatically logging me off multiple times during the day. In the future with the latest update of sql developer I will be needing to update my jdk version 11 or greater. Any ideas on what esle I need to check?

Logged off after no activity

It looks like I am being logged off after a period of inactivity. I have turned off energy savings and my screensaver, but I still appear to get logged off automatically after some time (I do not know how long, but it seems to be above 15 mins).
How to I make my system keep me logged in?

Hi
Have a look at System Preferences > Security > General. You may have the "Log out after xx minutes of inactivity" option enabled?
HTH?
Tony

Continually logged off after 10.10.2 update

I just installed the 10.10.2 update and the Mac restarted. When I try to log on, the process looks normal but then I get logged off. I started in safe boot mode and the same thing happens. I cannot log onto and use my Mac. What can I do next?

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Custom Masthead - Log off

hi,
I have developed a custom masthead for our portal. Instead of Log off being called in the functional area. I have inserted that in the separate area where the log off has to appear.
The line looks like
I have given log off text in between <a> tag and the href points to "/irj/portal" and the javascript that is callled is openLogoffMsg
when I preview this code running from NWDS, it is logging off. When i add this to framework Page and click on Log off URL, the pop up comes and when i click 'ok', it is refreshing and staying in the same page and not getting logged off. What should I do to get logged off and redirect it to the logon page.
Thanks & Regards,
Ganesh N

Hi,
Is the issue logoff direction to logon page, so that if a user logs off from portal, he will navigate to portal logon page (hostname:portnumber/irj/portal)?
If this is the problem you can change the redirection of the portal logoff in the following way:
In the config tool navigate to:
cluster_config --> system --> custom_global --> cfg --> services --> com.sap.security.core.ume.services --> Property Sheet properties.
switch to edit mode and change the property ume.logoff.redirect.url with the custom value "http://hostname:portnumber/irj/portal".
After saving your changes restart the system.
Regards,
Yasar

I'm unknowingly getting logged off.

Similar Messages

Maybe you are looking for