I'm using 10.6.8 but would like to use iCloud so need to upgrade to 10.7.4 but need to install 10.7 before I can upgrade to 10.7.4.  Where can I find 10.7.0?

I'm using 10.6.8 but would like to use iCloud so need to upgrade to 10.7.4 but need to install 10.7 before I can upgrade to 10.7.4.  Where can I find 10.7.0?

Welcome to the Apple Support Communities
The latest OS X version is OS X 10.8.3, so first check that you can use OS X Mountain Lion. First, check that your Mac supports Mountain Lion > http://www.apple.com/osx/specs If it's compatible, open the App Store and purchase Mountain Lion. While it's being downloaded, make a backup of your files and check that your apps are compatible > http://www.roaringapps.com
When the download finishes, the OS X installer will appear, so follow the steps. After upgrading, you will have 10.8.3.
If your Mac isn't compatible with Mountain Lion, check that you can run Lion > http://support.apple.com/kb/HT4949 If you can run OS X Lion, call Apple to purchase it > http://support.apple.com/kb/HE57 After upgrading to Lion, you will have 10.7.5.
To set up iCloud after upgrading, open System Preferences > iCloud. Read > http://www.apple.com/icloud/setup

Similar Messages

  • I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

    I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

    Plug the device into the computer.
    Select the content desired to sync.
    Sync.

  • I have a Samsung Laptop but would like to use Cinema Display with mini displayport.  Is that possible?

    I have a Samsung Lap top but would like to use Cinema Display.  The only connections on my lap top is HDMI and VGA.  How can I get it to work?

    Thanks Malcolm.  I saw this on the apple site
    Kanex C247D Single-Link DVI to Mini DisplayPort Converter
    Will that work?
    I also spoke to someone at apple..They told me to get 2 cables.  Mini DisplayPort to Dvi and Dvi to Hdmi..Connect the 2 and it will work...Do you think it will work? Just to save$$$

  • Looking to run windows on my MBPro through Bootcamp or Parallels, but would like to use a downloaded Windows 7, is it possible to install without the Windows Disc?

    Looking to run windows on my MBPro through Bootcamp or Parallels, but would like to use a downloaded Windows 7, is it possible to install without the Windows Disc?
    Need to set up a workstation on my MBPro that will only run on Windows. Im willing to use Bootcamp or Parallels to see what works best. Need to get this set up this week to enable working from home on my MB - rural and hoping to buy Windows 7 online - am I able to get windows working through either bootcamp or Parallels without the actual Windows disc? Bootcamp set up guide calls for a disc.

    Welcome to Apple Support Communities
    First, the answer to your question is yes, it IS possible to install Windows in Parallels without a disc, using an .iso image file.
    Boot Camp since OS X 10.8 also installs Windows without a disc: https://discussions.apple.com/thread/4889551?tstart=0
    Parallels has complete documentation, series of forums, and a knowledgebase. You can also download the current release of Parallels 9 and try it for free for a few weeks before you decide to purchase it.
    The Parallels Desktop for Mac product page: http://www.parallels.com/products/desktop/
    The Desktop for Mac forums: http://forum.parallels.com/forumdisplay.php?58-Parallels-Desktop-for-Mac
    Documentation: http://www.parallels.com/support/desktop-virtualization/desktop/#c12970
    The Knowledgebase for Desktop for Mac: http://kb.parallels.com
    The primary difference between a Boot Camp installation and a Parallels installation is that in the Boot Camp installation, you're installing Windows into a separate partition on your internal mass storage device (hard drive or SSD) and then rebooting your Mac directly into Windows.
    In Parallels, you're always running OS X on the Mac and Parallels is running a Windows virtual machine.
    Not to get too technical here, but it is also possible for Parallels to run an installed Windows Boot Camp partition as a virtual machine. If you're evaluating system performance with a trial copy, that might be the way to go, because you only have to install Windows once on Boot Camp as a dual-boot system, then install Parallels Desktop and run the Boot Camp partition as the virtual machine.
    There is a performance difference between the two, with the Boot Camp Windows installation being faster, but without the convenience of running both Mac and Windows applications simultaneously offered by Parallels. Sometimes that convenience outweighs a performance hit.
    I can't give you more Mavericks and Parallels 9 specifics, because I'm currently running Windows 7 with Parallels 7 on OS X 10.8.5. Parallels 7 will not run on OS X 10.9 Mavericks.
    I've been using Parallels (to run a few old rarely-used WIndows applications with features that would require a steep learning curve and major expense to purchase and learn a similar Mac app) occasionally since Parallels 3 and Windows XP. With each new release of OS X, each new release of Parallels, and each new Windows release, there are ALWAYS 'early adopter' bugs that get worked out over time.
    Message was edited by: kostby

  • I have an I phone 4 that I use in Singapore, but would like to use it in the US while on holiday. How do I cahnge out the sim card, and is there anything else that I need to do.

    I have an I phone 4 that I use in Singapore, but would like to use it in the US while on holiday. How do I change out the sim card, and is there anything else that I need to do?

    Ignore the other post (the one from Brendan), he has no idea what he is talking about.
    Read your manual (you have a bookmark to it in Safari on your iPhone or put iBooks on your iPhone and download the manual from the iBookStore) and it will show you how to remove the microSIM from your iPhone. AT&T is not tourist friendly and does not offer a pay as you go plan for visitors with an iPhone. If you are going to be here for a short time you can probably buy a pay as you go microSIM and use it before AT&T notices, if it is going to be for a long time that won't work.
    There is a 3rd party company that will sell you a microSIM that will work with AT&T but they are pretty pricey.
    Finally, you can get a pay as you go microSIM from T-Mobile to work with your iPhone but you will only have EDGE data speeds.
    Message was edited by: deggie

  • Is there an apple approved agreggator that allows me to publish to the iBookstore ibooks created using iBooks author? I would like to use the interactivity that iBooks Author allows but need an aggregator that supports it. Thank you.

    Is there an apple approved agreggator that allows me to publish to the iBookstore ibooks created using iBooks author? I would like to use the interactivity that iBooks Author allows but need an aggregator that supports it. Thank you.

    Apple - iTunes - Partner Programs - Book Publishers
         See a list of Apple-approved aggregators
    Start contacting them with your particular needs and see who fits best.
    Be sure to understand this info:
    Please note that if you choose to work with an aggregator to distribute your content on the iBookstore, Apple's contractual and financial relationship is with that aggregator.

  • Hi, I am going to an exhibition where there is no internet access but would like to show people around my website. I have added "scrapbook" but cannot work out how to 'save' an entire site for viewing off-line.

    Hi, I am going to an exhibition where there is no internet access but would like to show people around my website. I have added "scrapbook" but cannot work out how to 'save' an entire site for viewing off-line. I thought there was a way to specify 1/2/3 clicks from home page etc. Please help. DAVID

    OK, solved my own problem, but am posting here in case someone else has the same problem. It totally does not make sense, especially considering that it stopped after I reinstalled Lion, but the good thing is I have my files back.
    I scoured the web and found a lot of other people are having the same problem. Most of them didn't have a clue how to fix it. This discussion was the most helpful to me: https://discussions.apple.com/thread/2569766?start=30&tstart=90
    So, I went to the WD page and followed the instructions. The first suggestion was to plug it directly into a wall, because it may not be getting enough power from a power cord. I did this and it fixed the problem. Who would have guessed?
    Anyway, if anyone else is having this problem, go to your manufacturer's website for help. Here's WD's help: http://wdc.custhelp.com/app/answers/detail/a_id/1164/related/1/session/L2F2LzEvd GltZS8xMzI2MzIzMjUwL3NpZC82dmo0blZOaw%3D%3D

  • I have not downloaded my free pages  yet but would like to send a messages via email know from the notes application but do not know how

    l have not down oaded pages it is being processed however I would like to type up a messages on notes and sent it via e-lmail  can I and how?

    Bottom right corner.

  • TA22652 Some of my music was purchased with an old email address which I no longer have. I have forgotten the password to it and can no longer use music from old account. We moved and no longer have the same email service, but would like to use all music

    Some of my music was purchased with an old email address (old account) which is no longer valid. Since it has been a long time since we used the email address we no longer know the password. Now I can't access the music from my old account due to using a new computer. I've purchased the music and downloaded cds with the old account and need to be able to get my music.
    Thank  you!!

    ➡ https://iforgot.apple.com/

  • I enjoyed firefox but had to switch to ie because firefox could not connect to my BT Home hub. Never had this problem before only after downloading latest software. I have n't tried since but would like to use Mozilla

    I always used firefox but after a recent upgrade of software it would no longer load the site There was a problem with connecting through my hub. I had to use ie which works OK. I'm sorry I cannot be more specific. Maybe I could try it again. I have 2 disk VAIO and load Firefox onto disc d - not c. Reason being c is very full and I try to download everything onto D which has stacks of room

    Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
    Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
    Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
    Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
    That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

  • I have an Apple TV hooked up to a projector, but would like to use the computer's speakers.

    The iMac is hooked up to the amplifier, and is too far away for the atv to be plugged in as well. Any settings I can fiddle with?

    If you wish to use home sharing then you need to setup the Apple TV under your ID.

  • Would like to use CS6 on Mac OS and W7 w/o buying two CS6's.

    Purchased CS6 Student & Teacher addition for Mac OS at school, but would like to use with Windows 7 as well, when I get home.  Is there a way to do this without purchasing two licenses?

    Ned is correct the CS6 Student and Teacher edition is platform specific.  I would recommend that you look at Creative Cloud which allows you to install on both platforms.  We do also have a discount available for education users.  You can find more details at http://www.adobe.com/products/creativecloud.html?promoid=JQPEQ.

  • Suddenly, Google isn't working on Safari, I have switched to Bing, but would like to know what happened?

    Google has stopped working on Safari. Mysterious just grinds away with zero results. Have switched to Bing but would like to know what is going on.

    This is an easy solution but it doesn't help all users For those who tried it without a success, please refer to the following thread for more suggestions:
    http://discussions.apple.com/thread.jspa?threadID=1921644&tstart=45

  • When I use the search box I would like results to show up in a "NEW" tab but I can't find this setting anywhere... Any solution???

    When I use the search box I would like results to show up in a "NEW" tab but I can't find this setting anywhere... Any solution???

    '''browser.search.openintab''' userset boolean True
    Also in Google search, upper-right-corner settings
    You can always force opening a link into a tab with Ctrl+click or Ctrl+Shift+click
    If you want the same from a bookmark make sure to set
    : '''browser.tabs.loadBookmarksInBackground''' to same value as you have for
    : '''browser.tabs.loadInBackground'''
    The last setting is controlled by Tools > Options > Tabs >
    :: When I click on a link, switch to it immediately,
    which control the difference between Ctrl+click and Ctrl+Shift+click
    Items in boldface''' can be set in about:config
    * '''More information on configuration variables''' available in [http://kb.mozillazine.org/About:config_entries about:config entries] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config] (How to change).
    Reading:
    * http://dmcritchie.mvps.org/firefox/keyboard.htm
    * http://dmcritchie.mvps.org/firefox/tabs_config.htm

  • Can anyone help me find the free full semester labview course slides that were on the labview web site but recently disappeared. I would like to use them in my course.

    Can anyone help me find the free full semester labview course slides that were on the labview web site but recently disappeared. I would like to use them in my course.

    The main page of the Academic section can be found here.
    I think the material you are looking for is the courseware.
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Maybe you are looking for

  • RoboSource Licensing?

    We purchased two licenses for RHx7 and (YAY!!!) RH now has multi-author capability (I was stuck on x4). My architectural solution is to place RoboSource Control client on the two author's machines that have RH, and having a SQL database with RSC serv

  • Alv Grid Sub Total

    Hi All        I am have done an object in alv grid where it is working fine but what i want i am giving a sample please do let tell me how to do OUTPUT DATE       TIME-ENTRY  ACM-NO   CHARG    SHIFT   MACHINE-SPEED STANDARD-D    ACTUALL-DIPS   DOWNTI

  • Issue with iCloud.. email address and responding

    Hi Everyone, Not sure why this is happening but I have encountered some recent issues with iCloud. A little history I restored my iphone 4s and have reinstalled and reset all my accounts, apps, and services. All was working well until this last week.

  • Having trouble with the HTTP Server vi

    I'm having trouble using the HTTP Server program to view the front panel of my program remotely. When I initially start the server program everything works fine. However, the program hasn't been able to run for more than one or two days at a time bef

  • Captivate Reviewer issue

    Hey everyone, I haven't used Captivate Reviewer before so I am testing it out. I will be sending out a module to a group of individuals for feedback and wanted to get down the steps for them. The individuals that will be commenting on the module cann