I'm using 3G, I can't access my internet it says I'm not subscribed to a cellular data network.. How to subscribe?

I'm using 3G, I can't access my internet it says I'm not subscribed to a cellular data network.. How to subscribe?

Contact your cellular carrier.

Similar Messages

  • HT201699 My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work

  • Having just upgraded to Ios6 I can not log into my carrier. I get the message "Could not activate cellular data network. You are not subscribed to a cellular data network." What can I do to rectify this?

    Having just upgraded my iPad to IOS 6 I can no longer log onto my 3G Carrier. I get thi message "Could not activate cellular data network. You are not subscribed to a cellular data service" what can I do to rectify this?

    I reset APN settings from my carrier service site and rebooted but it didn't fix the problem.

  • I can no longer use my iPad 3 since downloading IOS 7. I can't access the internet, can't get into the app store, or itunes. Can't download anything or receive or send e-mails. Not happy. Wish I had waited.

    I can no longer use my iPad 3 since downloading IOS 7. I can't access the internet, the app store, or itunes. Can't download anything or receive or send emails. Not happy. My iPad is basically useless. Tried to erase and restore. can't even do that. whish I had waited.

    Hello suzanefromnv,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Best of luck,
    Mario

  • Hi, I have imac mac os 10.6.7, I can't access to internet with my ipod  touch using my imac airport...what's wrong? my ipod tells me is connected and airport is active...so? what should I do?

    Hi,
    I have imac mac os 10.6.7, I can't access to internet with my ipod  touch using my imac airport...what's wrong? my ipod tells me is connected and airport is active...so? what should I do?

    right, figured it out. had to put it in disk mode, then reconnect, then it was recognized, then i restored and put everything back onto it. hope this helps anyone else who has a similar problem

  • I can't access the internet with IE 11 on my PC so I would like to download Firefox on my laptop and install it on my PC. I've been using Firefox on my laptop.

    I use Mozilla Firefox on my laptop and would like to install it on my PC because Internet Explorer 11 stopped working. I can't access the internet so I downloaded the Firefox setup on my laptop and saved it to run on my PC. It initializes, but can't connect to the internet to retrieve the program. How can I get around this and install your browser?

    Download one of these installers: http://www.mozilla.org/en-US/firefox/all/
    If you machine can't connect to the internet to even download that though, you may have other problems (Using Firefox rather than IE is always a good choice though ;)
    [[Websites don't load - troubleshoot and fix error messages]] might help. Also, [[Firefox and other browsers can't load websites]]

  • Can you access the internet using wifi only on an iPhone 4?

    How can you access the internet using WiFi only (no service) on an iPhone 4?

    Assuming your connected to wifi - go to safari.

  • My brother used his Verizon Wireless SIM to activate my factory unlocked iphone 5s.  Now, I can't access the cellular data network option to change APN settings for my new carrier.  Already tried configuration utility and factory resets.

    So as the title says, after I got my iPhone 5s from apple, factory unlocked, my brother used his sim card in it for a moment to allow it to be registered and usable on WIFI until I made it to Japan.  Now that I have a data SIM card, I have to input specific APN settings, which are located in settings>cellular>cellular data network, however, cellular data network is not available as an option. I have reset the phone multiple times with and without backups and with and without the new sim in the phone.  I have also used the configuration utility to try to put the APN settings in the phone.  I contacted Apple and they didn't really have an answer as to what i should do.  My brother checked his Verizon account and my phone does not show up as one of his devices, so right now I'm stuck with and incredibly expensive iPod.  Does anyone have any idea what I can do to remedy this?  I am unable to contact Verizon via telephone myself as I have no phone service.  Any help would be greatly, greatly appreciated.

    You only have to clone your mac when using certain cable modem.  You don't clone your mac when using dsl.
    Greetings from Northern Ontario, Canada

  • After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
    From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
    I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
    I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

  • Networks will "connect" over Wifi, but DNS resolution is impossible and I can't access the internet.

    My OSX 10.7.5 iMac (late 2011) will connect to my university's wireless network and thinks it's connected to the internet, but cannot resolve any DNS - and cannot actually access the internet on any browser or internet-utilising app. My university has 2 networks, a regular wifi one and an eduroam one. I have the same problem on both networks. My MacBook, running Snow Leopard, and my iPad (latest software) both connect to both networks just fine.
    Because it's my university's network, i can't reset my router or anything like that. I'm in halls. I don't think it's a network issue, because all my other devices are fine.
    I've searched high and low on these forums but haven't found anyone having exactly the same problem as me - I've heard of odd few minutes of people losing their connections in this manner, but my computer's been down now for hours and nothing. I've restarted it many times, even once in "Recovery Mode" and I'm getting nothing. I've followed instructions to flush my DNS cache, renew DHCP leases, I've tried manually inputting various DNSes I've found (eg the 8.8.8.8 and 8.8.4.4 google ones), none of which have worked.
    Using terminal, I can't ping either an http:// domain, or an IP address. Both get "timed out" as a response. I can't access the internet on any browser (chrome, safari, firefox), my google mail notifier, Skype, or my twitter app. Or anything else.
    I'm relatively computer literate, but I'm not particularly code-savvy, so I'd really appreciate it if I could get some step-by step help on here, bearing in mind what I've already tried. I'm really worried, because it all seems to have happened completely out of the blue. Last time I updated was some time a couple weeks ago; I update whenever my software update beeps at me.
    Thanks.
    link.

    Go step by step and test.
    1.Power Cycle
       Power off the router. Unplug it from the wall. Wait a while.
       Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
       It will take a while.
      Restart the computer.
      Start up in Safe Mode.
       http://support.apple.com/kb/PH11212?viewlocale=en_US
    2.  Turn off Extensions, if any.
         Safari > Preferences > Extensions
    3. Turn off proxies, if selected.
         System Preference > Network > Advanced  > Proxies Tab
         Under "Select Protocol", uncheck any box if selected.
         Click "OK" then  "Apply"
    4. Uninstall anti-virus software, if any.

  • I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??

    I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??

    I don't follow your instructions... mine goes Settings->General->Cellular and from there it's just on/off options for Cellular Data, Enable 3G, Data Roaming, etc. Or I could go Settings->General->Profile APN Carrier Settings but when I click that it just shows as verified but no Visual Voice APN or MMS Settings. If I click More Details it goes to Signing Certificate which has a bunch of parameters for unlockit.co.nz but I am unable to change anything.
    I just updated my iphone 3GS to IOS 6 and my internet (wifi and 3G), voice and text all work, but the only thing I can't do is send/receive pictures via text message. I am using At&t prepaid sim. I tried turning off the phone completely but I'm trying to avoid a complete restore.. at least until I can understand the problem better! Any help would be appreciated!
    Thank you!

  • I can't access the internet from my home wi-fi.  It works on other wi-fi, and my wi fi is working on my h ome computer.  I keep getting a message that says it can't access the server

    I can't access the internet using my home wi-fi. My wi-fi is working on my home computer, and the itouch can access the internet at another person's home using their wi-fi.  I've looked in the settings, and can't seem to see any differences.....i'm a techno dummy - so please respond in very basic info

    Before resetting try restarting.  Or you can go to Settings from the home screen > Wi-Fi > your network and scroll down to 'Renew Lease' and press that.  When you do you should see a button labeled 'Renew Lease?' and another labeled 'Cancel'.  Select 'Renew Lease'.
    You can either back out of that screen back to the home screen or just use the return button to go back to the home screen.  Then select Safari and see if you can hook in.
    I have to go through that process every five or ten minutes or so when in the second story of our house - weak router signal up there.

  • TS1814 ITunes can't access the internet for updates or restores?

    I'm trying to restore my iPod but my iTunes isn't accessing the internet for it. When I tired to update it it was still unable to access the internet, it can still access the internet for previously purchased songs and for the iTunes store. I'm using Windows 8. I already tried Apple's support, but I can't find an answer, anyone know a fix?
    I've already done everything that is on the generic support pages

    I had the same problem and this is what I did. On a side note and just a disclaimer as this may not be your issue, but helped with mine. Several months ago, I noticed that my XBOX 360 was not connecting to the live service. I disregarded it at that time because I did not use the Xbox live service much. However, several days ago, I switched security on my wireless router (Belkin N1) and found that my Apple TV could not connect to the internet, but would connect to my local network via wireless. My iMac also would connect, but no internet. I reset my router to factory defaults and found that the Apple TV was pulling a 169.XXX IP address. I had DHCP enabled on the router and I suspect this may be part of the issue, but I manually assigned an IP address to the Apple TV of 192.XXX. I also assigned a manual IP address to my iMac. Now both connect successfully, but is odd how I had DHCP working on both ATV and iMac before and were working. I've tried the Apple TV via wireless and wired and had the same problem before assigning a manual IP address. I assigned a manual address to the XBOX and it now works. The XBOX was also pulling a 169 IP address.
    Like I said before, this may be an issue with my router giving out or may be an issue with Mac products but I am not completely sure. I just know that manually assigning the IP address made both systems access the internet now.
    Hope this helps and if anyone else has a solution, please post.
    Thanks
    Brandon

  • "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

    "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

    this just started w/ me yesterday.  I was running 10.5.3, and nothing changed - the message just appeard out of nowhere.  I update to the latest iTunes 10.6 but the message is the same.
    Sounds like probably some sort of Library file corruption.
    The two options available in the message box are "Download" and "Quit".  Download is useless because I'm already running the latest.  Quit is pretty useless.
    I was going to just create a new Library and re-import all my music.  Of course, all my iPhone sync settings are going go have to be recreated.

  • My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

    My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

    I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
    All else fails? Restore it.

Maybe you are looking for

  • Extract of gr processing time in open purchase order

    to display gr processing time in open purchase order .give me query for extract the gr processing time which table and which field we have to take

  • LVDS Input on sbRIO 9606

    We have a Single Board RIO 9606. We would like to connect Linear LTC2170 ADC to this board. The ADC outputs are differential (LVDS). 1) In LabVIEW, is it possible to configure the FPGA I/O on sbRIO 9606 for LVDS inputs? 2) Else is it possible to do i

  • Direct Database Request - Add Drop Down List

    Hi, I have created a direct database request and would like to represent the output in table format. How can I add a page drop down filter, I would like to move two columns as page drop down lists and also be able to view the columns in the table. I

  • Error when I bounce database

    I have two oracle database ver 9i in one unix box sun soliars 8. both one running fine. I increased oracle process from 200 to 300 on each database init.ora file. once I bounce the database one by one i bring it up one database but when i was bring i

  • Notebook does not see mPCIe card (asm1061)

    Aloha Community, i am using an old notebook as a small server (cups/ftp/http/etc). The Notebook is an old Dell Inspiron 1520. I attached three 3,5'' HDDs to it which are powered via an external PSU. the first HDD is connected to the original sata-por