I'm using a 30 days trial of PS CC...but I Can't open raw files from my NIKON D 7100

I can't open raw files in PS CC.
I'm using NIKON D7100.

Noel,
Good morning, and may I just add THANK YOU!
While certainly not as efficient or handy, that is the answer. I simply
instructed my PC to open the containing folder, in this case my direct card
reader, and manually copied the files to my hard drive (highlight first and
last-SHIFT-Enter) and moved them to a pre-named subdirectory.
I opened PScc and pointed to that file, clicked on the photo I wanted and
VIOLA! Opened in Camera Raw and I was off to the races!
Perhaps the user groups can make some noise and someone at Nikon may take
notice!
Thanks again for the suggestion.
Larry

Similar Messages

I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

You would need to update to PSE 12, or just keep using the DNG converter. Your camera requires ACR 8.4, which isn't compatible with PSE 11. It's also not compatible with PSE 12 if you are running Vista or XP.

I use CS3 & with 7.2 download still can't open Raw files from Sony A99 camera

This is a real setback until compatibility occurs. Anyone have the answer?

Hi ecoessays1,
Unfortunately CS3 does not support the 7.2 Camera Raw Plug-in. Here is a list of Raw-compatible Adobe Applications. From the list, you can see that Photoshop CS3 only supports Camera Raw 4.0 through 4.6. With that being said, the Raw plug-in Supported Cameras list states that you need atleast Plug-in 7.2.
With that being said, you will need to upgrade your software version to CS6 or Creative Cloud (CC) in order to support Camera Raw on your Sony A99. Photoshop Elements 11 and Lightroom 4.2 and above also supports Camera Raw for your camera model.
Hope this helps!
Clarice

How do I open raw files from a Panasonic DMC-GF5 using Elements10 on a PC?

How do I open RAW files from a Panasonic DMC-GF5 camera using Elements 10 on my PC? When I try to open a Raw file I get a message 'wrong type of file'

I believe you need ACR 7.1 which PSE10 cannot be updated to.
Use the DNG Converter to make DNGs from the RAW files and those should open in your older PSE version.
You can also buy a newer version of PSE. Perhaps do a Trial (Try) of PSE12 and see if PSE13 comes out in the next week or so.
The DNG Converter can be found on this page: http://www.adobe.com/downloads/updates
PSE12 Trial: http://www.adobe.com/downloads.html

Can I open raw files using photoshop elements

Can I open raw files using photoshop elements

Yes, depending on the Camera Model and version of PSE.
All camera makers like to make slight changes to the RAW format for their new models. Adobe then take a few months to produce a camera RAW plug-in to process the new format.
Give you PSE version and camera model and we could be more help.
Brian

I just downloaded a trial for LR. But I can't import my pictures from iPhoto? any suggestions?

I just downloaded a trial for LR. But I can't import my pictures from iPhoto? any suggestions?

Hi Mohan,
Please ensure you have followed the instructions correctly.
Adobe Photoshop Lightroom Help | Import photos from iPhoto (Mac OS)
If yes then post the screenshot of the problem.
Regards,
Sumit Singh

I'm thinking of buying a new camera. Does anyone know if can I process RAW images from a Nikon D5100 or Nikon D3200 using IPhoto on a OSX 10.5.8?

I'm thinking of buying a new camera. Does anyone know if can I process RAW images from a Nikon D5100 or Nikon D3200 using IPhoto on a OSX 10.5.8?

I think you'll note that Google found the list for 10.8, amazing, isn't it
No, neither are supported for Raw on 10.5.8
You'll need 10.6.8 minimum for the D5100
http://support.apple.com/kb/HT3825
and for the D3200 you'll need 10.7.4 plus compatibility update 3.1.3
http://support.apple.com/kb/HT4757
Bear in mind that you may also need to update your version of iPhoto too.

I just began month trial of cs6 & cannot open raw files from nikon 600?

I just began month trial of cs6 & cannot open raw files from nikon 600?

Have you updated your Photoshop to get the latest Camera Raw update patch? If not go to:
Help >> Updates
This should get you the necessary updates for your camera assuming it is not "too recent".
Good luck and post back.

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

Can't open Raw files in Photoshop CS6 using Nikon D7100?

I have a Nikon D7100 and recently did a photoshoot where I shot in Raw. Upon uploading my images and then attempting to open them in Photoshop it came up with a pop up saying that photoshop is unable to open that camera raw file. I have downloaded the adobe recommended converters but those don't seem to work either. Help?

The Nikon D7100 didn't get support until Camera Raw version 7.4; CS6 shipped with 7.0 (and is compatible up until 8.3). Did you go through Help > Updates?
Also, versions of Camera Raw above version 8.3 won't work on anything below Windows 7 or Mac 10.7. You'll have to "upgrade" to at most 8.3 to continue using it on the other operating systems.

Trial question: Can't open .doc files from web page

I'm using Dreamweaver on a Mac, and I have a link on a page
that should bring up a doc file. When I preview the page in Safari,
it brings up a directory listing which highlights the file so that
you can double-click and open the file. (Of course, I'd love for it
to go ahead and open the file, but my understanding is that
Dreamweaver Mac doesn't support that.) However, when I preview in
Internet Explorer, I either get a message that the File is Not
Found or it just spins and never brings up anything. The file is in
the root directory of my site (same directory as my index.html.
Any ideas?
Thanks!
Kim

Do you have Word installed on your Mac? If you don't, it
won't open.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"kshorb" <[email protected]> wrote in
message
news:eenckl$h3a$[email protected]..
>I used code similar to that below, but the .doc file
never opened in IE. I
>did
> find, however, if I link to a .pdf it works just fine.
So I just went
> ahead
> and converted my .doc to a .pdf and changed the href.
Maybe it's
> something
> specific to my computer... Thanks.
>
> <a href="yourdoc.doc">Click here to open Word Doc
> </a>
>

Hello, i got a new iPad and i want to use iTunes U. It is on my iPad but i can not open It. Want should i do¿ Thank you

Bello, i got a new iPad and i wanted to use iTunes U. I instale debut i can not open It. What should i do. Thank you

Hello Tuka66,
It sounds like you have installed the iTunes U app, but it is not working for you. I would try the troubleshooting steps from this article named:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
1. Update your device software
Update your device to the latest version of iOS.
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you may be asked to purchase the app again. Learn more about downloading previously purchased items.
Thank you for using Apple Support Communities.
All the very best,
Sterling

I can,t open raw files in Bridge/Photoshop CS5 from my Canon Eos 6D. I succeeded in transfering from my camera using Bidge

I need help

Which version of Camera Raw do you use (Photoshop > About Plug-In > Camera Raw) and which one is needed for that camera?
Camera Raw plug-in | Supported cameras

I can't open .xml files from a CD using firefox. They open OK with IP, but not Firefox.

the .xml files are on a cd, when using MS Internet Explorer they open OK, with Firefox set as defasult browser I get a message saying unable to open <filename>

I've compaired two machines that have had this issue. One I fixed by simply reinstalling v9.3.3 off the Adobe Site. Once fixed I compaired the Registry Settings to the one that was still broken. I found that a registry setting was missing in HKEY_CLASSES_ROOT\SOFTWARE\Adobe\Acrobat. All you have to do is right click on Acrobat, select NEW --> KEY, and call it EXE. Select the newly created folder, and in the right pane, right click, select NEW --> STRING VALUE. Double click the newly created string and under the Value Data: copy and paste the following line including the qoutations. "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe" Once you are complete, close IE and reopen it and try and open a Adobe Reader File.
If you want the easier method you can also copy and paste the following code into WordPad and just change the file extention to .REG
Then all you have to do is double click the file and it will insert it into the registry automatically.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\SOFTWARE\Adobe\Acrobat\Exe]
@="\"C:\\Program Files\\Adobe\\Reader 9.0\\Reader\\AcroRd32.exe\""
Hope this helps,
Ed L.

Nikon D7200 and can not open RAW files. Error msg says camera isn't supported. Using PSElements 12

I recently purchased a Nikon D7200 and I can not open RAW files. I get error messages indicating camera isn't supported. I've downloaded RAW 9.0 but no luck. I'm running PSElements 12. Any suggestions? Is the camera too new for Adobe?

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
As per
Camera Raw plug-in | Supported cameras
D7200 needs ACR 9 and according to
Camera Raw-compatible Adobe applications
PSE12 supports only up to 8.5

I'm using a 30 days trial of PS CC...but I Can't open raw files from my NIKON D 7100

Similar Messages

Maybe you are looking for