I'm using a Mac. When I tried to open my iPhoto library in Elements I get the error message "cannot complete request PE doesn't recognize this type of file"?
I use a Mac. When I try to open my iPhoto Library in Elements I get the error message "cannot complete request, PE does not recognize this type of file." The import option only allows me import a "frame from Video"?
You can't use iPhoto that way. Poking around in the iphoto library from outside iphoto is just begging for trouble, the fastest way to corrupt your library and lose all your images.
You have two choices with iphoto:
1. Set PSE as your external editor and send the photos from iphoto. Save, never save as, and don't change the name or format and iphoto will remember your last saved edits and the original, although you have to lose the edited version to revert to the original. This doesn't work with raw files.
2. Export the photos from iphoto, use File>Open in PSE and then you can make all the changes to name and format that you want. Then import the saved edited version to iphoto as a new file.
Similar Messages
-
When I try to open a .jpeg in Bridge CC2014, I get the error message cannot find Photoshop CS6.
I have associated my .jpegs with Photoshop CC2014. I had to do this manually. Now, every other program opens them in Photoshop, except Adobe Bridge CC 2014.
If I try to Open a .jpeg (or any other file associated with Photoshop) Photoshop from bridge, it says It cannot find the photoshop cs6.exe file. Of course not! I uninstalled it before I installed CC. Maybe two years ago. And now Bridge CC2014 goes looking for that as the CS6 default Photoshop.exe?I finally got it to work by going into Bridge->Edit>Preferences>Default settings. After choosing a file that is supposed to open in Photoshop, I chose to change it and browsed to Program Files>Adobe>Adobe Photoshop CC2014 and manually linking each filetype to the photoshop.exe.
I have spent the better part of a week getting Adobe software to work again after the Adobe CC2014 install. I will never trust Adobe CC updates again. They failed to warn me that CC2014 installs as a completely different copy rather than an update of CC. As a result, I ended up uninstalling CC apps after installing 2014. A mess that has cost me more than *30 hours* of chasing around forums, manually re-associating files. Even a registry hack! Found by a user, not by adobe.
Ordinary users shouldn't have to do this sort of thing after a normal install from the Creative Cloud panel. The genius software engineers at Adobe are being totally undercut by the keystone cops in the cc updates and install department. -
When I tried to open a fresh iTunes download my computer gave the error message : 'program cannot run in DOS mode'. Since both items are Apple, why might this be happening?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99602) -
I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue
Hi,
Try here: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird--- -
when trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?
I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps. I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps. I updated the apps via iTunes and then synced again without an issue.
iPhone 4S / OSX 10.6.8 / iTunes 10.5.1 -
Sometimes when I'm trying to download an app from the app store when it is trying to load I get the error message cannot connect to iTunes store. I am on the internet. Any ideas?
I have the same issue. How did you solve it?
-
When I try to open a document created in Pages, I get an error message saying "[Document Name" can't be opened." I don't want to lose hours of work; has anyone else encountered this?
A few general trouble shooting tips that may apply here:
1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
Restart Pages and attempt to open one of the files.
If all is well, Trash the plist file and empty the Trash.
If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
Regards,
Barry -
Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days, is there any problem ideally or, please leave a reply
<Email Edited By Host>Hi vivekanandanganesan,
Thanks for using Apple Support Communities. This article has some steps you can try if you are unable to connect to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
- Ari -
I have Windows XP and microsoft outlook with Firefox as my browser; when I try to open a link in an email I get the following message "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator"
Tried that. Unfortunately it did not work.
-
i bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx
Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry. -
I'm trying to install iTunes on my pc and I get the error message "Service Apple Mobile Device Failed to Start. Verify you have sufficient privileges to start system services.
What do I need to do to get iTunes to install?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Everytime iTunes opens on my Windows 7 pc, I get the error message -42110 while it appears iTunes is trying to download a movie I didn't order. Any suggestions?
Thank you i been looking for a answer to this all day but I couldn't find anything on it! Now I know I will find a file with it! thanks!
-
i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???
Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's -
When i am in ibooks if i go to store i get an error message "Cannot connect to itunes".
when i am in ibooks if i go to store i get an error message "Cannot connect to itunes".
ps - only when I tap browse. Everything else seems ok
-
When I try to open a new window in Firefox, I get an error message
When I try to open a new window in Firefox, I get the following error message:
"Not Found
The requested URL /en-US/firefox was not found on this server."
...but other websites, such as Google or CNN.com, work just fine.
I'm running Firefox 3.6.28 on my MacBook Pro, with OS 10.4.11. I can't update to the latest version of Firefox unless I update my OS, which would be costly and also involve increasing my RAM.
But the Firefox homepage worked fine until this morning. Is this likely to be a temporary glitch? If not, how can I fix it?
Thanks,
EmmyAt least at the moment, the default Firefox homepage is back! So maybe this was a momentary glitch. But see below.
BTW, here's the URL for the page:
http://start.mozilla.org/en-US/?client=firefox-a&rls=org.mozilla:en-US:official
'''But, '''the "Mozilla Firefox Start Page" currently lacks a menu bar at the top with various Google options such as "Gmail," "more," etc. I found these very useful.
I'm wondering -- did Google tell Mozilla to stop including those links on its start page? Maybe Google wants us all to switch to having Google as our default homepage. Or is the lack of a menu bar just another temporary glitch?
Emmy
Maybe you are looking for
-
Help with copying files into the the Start Menu
I am trying to copy my application which tracks system usage, such as reboots, temps, etc, I want it when it first runs, to copy it self into the the programs folder and the start up folder. However I get the error ""FileCopy: destination file is unw
-
I can not send a text to a particular mobile number in my contact after the ioS7.03 update. I can receive text from this number and I can call but I can not send. I deleted the contact and all previous messages and reentered the mobile number in cont
-
I've used Lighroom before, but not when I try to import photos I get an error message stating I cannot open the catalog because it is not writable. I checked and it isn't "read only" and is not open anywhere else. I've tried restarting my computer an
-
Remembering an undefined number of arrays.
I have an undefined number of arrays (usually 3-5, but can be different) which i need to 'remember' within a LabVIEW VI. Each array may need to be called up in the future for a variety of things, or even overwritten. I am currently storing the defaul
-
Hi, Is there a way to have a map with 2 tables but join them conditionally. Need to Update Table C using Table A but join TABLE B only certain condition is met. I can achieve it using PL/SQL procedure by creating Dynamic Select Statements. Can it be