I'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?
i'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?
you are welcome
Similar Messages
-
HI there all, have got a 2 year old macbook pro that just recently wont start up. Even if I know the battery is fully charged. What I have to do is remove the battery, wait a minute or so, insert back in and it will fire up. Any ideas?
Try the old two stand-by's first:
Reset PRAM, and;
Reset SMC.
If that doesn't help, call back,
Clinton -
Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal. Anyone have this issue before? I've only had this for about 3mos. I called apple support. They tried one thing then said I have to take to the apple store. Unfortunately I don't have one nearby. So before I travel an hour+ away I thought is give it a shot on here. Thank.
Hi S,
Did they have you try an SMC Reset: http://support.apple.com/kb/HT3964? -
Apple replaced my hard drive (macbook pro 2011). Now I am unable to buy/download ilife from the apple store "on this computer". Any ideas as to why?
Thanks for your help in advance!If the computer shipped with Snow Leopard then you would have received an install DVD for iLife with the computer.
-
Users with Adobe Acrobat 9 Pro (Windows XP) are not able to open PDFs created on the server. They receive the error message:
“There was an error opening this document. The file is damaged and could not be repaired.”
Even if the users save to disk and try to re-open, the error still occurs.
This error did not surface in our QA testing because we were testing with Adobe Acrobat Reader 8. What can the difference be? Is there additional information that I can look for in order to troubleshoot this?
Thank you for looking at my post. Please provide guidance in trying to resolve this issue.
ElsaSo, I'm not sure how much this will help but if you save the pdf AHW_Test_05112009xx.pdf and open it in a text editor, and go all the way down to the bottom where the %%EOF marker is, it looks as if the html page is getting appended to the end of the pdf. I recieved the "This file was damaged..." error in Adobe 7.1.0 when trying to open it but if you remove the html at the end, it opens up just fine.
It appears that whatever's appending the html to the end is causing the issue.
Below is what the file looks like near the end after the EOF:
startxref
400771
%%EOF
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head><title>
Gartner for IT Executives
</title> -
Macbook pro 2011 has faint green light. won't turn on. what is the issue?
I've had this problem twice and both times I've gone to the genius bar they've plugged it in and pressed a few buttons and it's working fine. It's a 2011 macbook pro 13 inch. Has a faint green and flickering orange light on the charger. I've tried resetting the SMC and the basic troubleshooting steps. I'm tired of going to the genius bar for a 5 minute fix. I can't turn it back on after it suddenly shuts off. Power button is not responding. It was updated and working fine. Im a student and can't afford to have this problem every week. What is the issue?
Just face facts - if water (or any other liquid) reached you logic board or any other electronic components, you're going to be the victim of corrosion.
Eventually, you'll need to have the logic board replaced. There are liquid sensors all over your MBP and the techs can tell if these have been activated. I wouldn't turn the computer on at all - if it were me, I would take it to your local Apple Store/AASP and get an estimate for repair. Rice & other desiccates may 'dry up' the liquid, but it won't undo the damage already done.
Clinton -
Late Macbook Pro 2011 won't charge via MagSafe adapter.
My friends Macbook Pro 2011 same as mine wont charge the battery via MagSafe adapter. The battery is good and the adapter also, ive checked them on my Mac. The problem is that on her Mac it won't charge. I've change the MagSafe adapter on her computer and it didn't work still no charge, no green light on the L shaped adapter. Can it be the Logic Board?
Resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support -
MacBook Pro 2011 and latest Kingston KHX1600C9S3K2/8GX
Hey guys,
As the RAM is pretty expensive when bought off Apple I decided to go with 4Gb for my MacBook Pro 2011 (some days ago).
However if anyone tries to install the latest 2x4Gb Kingston modules (KHX1600C9S3K2/8GX) 1600Mhz I'd be more than happy to know if it's a success because I might need to upgrade to 8Gb in some months.
Thanks a lot!If you´d like to update with 3rd party Kingston´s i suggest to use KTA-MB1333/4GB
If have them running since one week without any problems
The MB within the partnumber says that they´ve been tested against Mac Books.
As you are from Switzerland here´s the link in german :
http://www.ec.kingston.com/ecom/configuratornew/modelsinfo.asp?SysID=69655&mfr=Apple&model=MacBookPro+%28DDR3%29+15&searchtype=&root=de&LinkBack=http%3A%2F%2Fwww.kingston.com%2Fderoot&Sys=69655-Apple-Ma cBook+Pro+%28DDR3%29+15-inch+%28Early2011%29&distributor=0&submit1=Finden -
My MacBook pro 2011 isn't charging!
My 13" MacBook Pro 2011 i7 model isn't charging. It's only 2 weeks old. The magsafe adaptor light doesn't come on at all, I have tried restarting my computer, and I have tried several different power outlets, all give the same effect. I havn't been rough with it, the most travelling it has done is going between my bedroom and my loungeroom. The screen seems to keep dimming and lighting up, but I may just be seeing things being paranoid.
What can I do? Will Apple cover this in the warranty if it's actually broken? D:Try this first:
Intel-based Macs: Resetting the System Management Controller (SMC)
If that doesn't help, it's a warranty issue. -
its been a couple days now since my macbooks been playing up someone please help me. ive got firefox, google chrome etc none of them are loading facebook every other websites works fine, facebook takes 5 minutes to load and it goes to a mobile website without loading anyone know why? im using a macbook pro 2011 with ios 10.6.8
Make sure your Java and Flash are up to date from http://www.java.com/ and http://www.adobe.com/
Clear your cookies for Facebook as long as you remember the password for it.
Try a different web browser * if none of the above work. -
MacBook Pro 2011: Problems with logging in
When my MacBook is starting and I am trying to login to my account, there's only the aurora background without the dock or anything else. I can move the mouse and it seems that I am already logged in but I can't see my harddrive, dock or even the menubar. The only way to turn it off is to push the on/off button once but I could also restart it or log out. This seems to be normal. I don't need any force quits. I only don't see my harddrive, programs, dock basically everything exept my mouse and the default aurora background.
I rebooted from the system DVD and now it works but I'm afraid of getting this issue again in the future.
If there's anybody out who has the sam issue and solved it, please tell me!
I am using a MacBook Pro 2011
Quadcore i7 2,3 GHz
750 GB Harddrive
8 GB RAM
Thanks in advance everybody!As always maintain a backup or two of your data on a external powered drive(s)
Some do one TimeMachine and one "hold option" Bootable clone using something like Carbon Copy Cloner or Superdupers.
The OS and programs can be replaced, but the user data is unique and valuable media, can't be.
Drives are cheap, only $120 or so per 1TB. No reason not to backup data. -
If I put an external monitor (actually, it’s a full HD external monitor), the AMD Radeon HD 6750 takes the job and even if there is no application that runs (excepted the Finder, of course, or AppleScript Editor only [used to quit the Finder]), after two or three minutes, I start to get my MacBook Pro 2011-11 hot (top-left).
I even put wood between the table (desk) and the MacBook pro feet, then added stoppers of plastic bottle: the hot start to be hotter.
Then, the Finder start to responding slow, slowly, very slow…
This can also happens on winter (the temperature of the room act on the hot, but only if it is 25 / 30 ° celcius.
The temperature tops around 80° celcius, but the overall slow of the computer make its use… nearly impossible. MICE under VirtualBox takes … nearly minutes to reassemble a two pages screen shot (2 images of 1440 pixels wide).
I recall that when I had my previous - smaller - monitor, I do not had that trouble. Its resolution was 1440 x 900 (same as the built-in monitor). In Fact, the Intel HD Graphics Card was the default one at these times. Once I replaced that monitor with a 22" (1920 x 1080) monitor, the AMD Radeon video card is running and the heath comes.
BTW: I run Lion, Mt Lion and Mavericks and the trouble exist with all these OSes.
Ideas ?The last version from July 14th (of course): 4.3.14
As it was during the last years (far before the trouble comes).
Nota:
a. the trouble does not appears when I had my old external monitor who was 1440 x 900 (same as the internal monitor resolution),
b. the trouble exists (appears) when I connect the external monitor (both 1600 x 900 and 1920 x 1080). It does not seems top be related to anything else.
On Mavericks, when you click in the icon located in the right of the menu bar (notifications ?), and the gfxCardStatus application is running, you get a notification that said (something like):
'AMD Radeom 8750' is active
or
'Intel HD Graphics 3000' is active
It is not possible to set the GPU to Intel HD Graphics 3000 when the external monitor is plugged.
I installed that application weeks ago / far after the hot start.
That is why I say the fault comes from the AMD Radeom 8750 GPU !
But, I may be wrong… -
Anyway to record just audio using my macbook pro?
Hi,
I wanted to know if there was anyway to use my macbook pro to record sound?you can record audio in iMovie. The question is what format do you want it in? I'm not sure how to create an MP3 file. There is probably some free program at Macupdate.com if you look.
-
Im using intel macbook pro 13" and since I'm using the new OSX Lion, the keyboard backlit won't turn off and it's eating up my precious battery. Im always mobile so this is very important. Apple doing something to fix this bug immediately?
multiplryan wrote:
To be totally honest, about 3 weeks prior I spilled some milk from cereal on the desk and a little bit got onto the battery.
I don't think you have a case.
You can replace the logic board yourself if you are a DIY'er and save some money.
Maybe you are looking for
-
Basically I had to reformat my hard drive, and in order to do that I copied all the files from it to a disk image which I then used to restore through disk utility. Now this worked as far as individual files go, but the OS for some reason didn't copy
-
When I try to open a certain java file it locks up the IDE and spits out an infinite number of the following error messages: at oracle.javatools.editor.BasicView$LineRowMap.rebuildRowMap(BasicView.java:3286) at oracle.javatools.editor.BasicView$LineR
-
SCCM Client entry in SCCM console for new VM with same hostname
HI, I have Hyper V server with several VM's running with server OS. Recently I have stopped 2 VM's with OS windows server 2008 & 2012 & recreated new VM's with same hostnames & IP addresses. Problem is I am unable to install SCCM client on New VM as
-
Is it possible to dynamically load an image/resources embed in a SWF?
Hi all, i have created a flex library project, just containing images (.GIF)...etc. And i create another flex application project that merge the .GIF files into the final SWF application. based on the current time, i want to display different
-
Ordering Additional Copies of a Book
How can I place orders for additional copies of a photo book already shipped?