I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Similar Messages

HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

System Preferences > Displays.
De-select "Automatically adjust brightness"

Encore DVD Error Message - "End of Stream has been reached"

I have created a project In Encore 2. it has motion menus, subtitles and sound. When we go to preview the project it gives us this error
"End of Stream has been reached"
We have checked our assets and the audio and video are DVD standard.
We did a check project and it found no errors with the project.
We are running Windows XP SP2 on a network, 2GB memory, 200GB hard drive Dell OptiPlex Desktop
Dose anyone know what we should do???

The End of Stream Message can be solved by removing one or moor unwanted elements from the time line. in my case that was a jpg image that encore didnt liked.
It is very difficult to find out witch element you need to remove, but that is the only solution.

Capacity limit has been reached

Hi Team,
When we run a payment proposal through F110 its internally triggering Function module FI_PAYM_XML_WRITE,
Through the transfer statement in the function module its placing the data in the designated path of application server
(The folder is located on windows machine not on Unix machine).
Some times its successfully placing the file and some time we are getting the SHORT DUMP as “capacity limit has been reached”,
We already checked with our Basis team, they are telling that folder has 4.8gb more free space, so there should not space issue.
Please let us know how to correct this.
Thanks & Regards,
Phani Kumar

Hi Glen Anthony,
I Checked the point with the Basis team, there is no restriction on the file size and we have more than sufficient space to place the fiel.
Hi Max Bianchi,
Below is the run time analysis, Please let me know how to correct the error.
Runtime Errors         DATASET_WRITE_ERROR
Short text
    Error when writing to the file "/nfs/SAPP/PIN/out/BDDPTA2BNP1467".
What happened?
    Resource bottleneck
    The current program "SAPLDMEE5" had to be terminated because
    a capacity limit has been reached.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_FILE_IO', was not caught in
    procedure "FI_PAYM_XML_WRITE" "(FUNCTION)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An error occurred when writing to the file "/nfs/SAPP/PIN/out/BDDPTA2BNP1467".
    Error text: "Missing file or filesystem"
    Error code: 52
And error is occuring at transfer statement in the std function module
FI_PAYM_XML_WRITE.
Thanks,
Phani Kumar

Operation could not be completed because you dont have access to some files

Hi guys,
Recently since an update not long ago ever since i have been trying to copy stuff into my NAS (Thecus N5200) it comes up with a problem saying
"Operation could not be completed because you do not have access to some files"
I have read some places who say that this is due to some permission errors or some of the files get locked somehow and means you cant copy it properly however i have checked these files and it is not the case. I have looked online and even called up Apple to see what they could tell me but even they said that they havent had any calls regarding this problem before. The person from Apple suggested i try doing a Disk Permissions repair and for a while it works...but 5 minutes later it happens again.
What can i do to fix it? I will be extremely unhappy if i have to keep doing this every time i copy something. Sometimes Repair Disk Permissions wont change a **** thing. This is ******** because its never happened before and only started recently

sorry for the long correspondance. I sort of "forgot" about this thread and was using usb to transfer files (which is quite annoying).
AFP is enabled which means i believe it is connecting to the server through AFP. The funny thing is that it copies pretty much all the way to the end and then says "operation could not be completed because you dont have access to some files" . Im not sure what it has to do with disk permissions but sometimes it helps and sometimes it doesnt.
Thanks for the link Barney, looks like im not the only one suffering from these issues. I was connecting via smb://server before, i just tried mounting it via afp://xxx.xxx.x.xx . i will see how it goes but some people say its slower? for documents i dont mind but i hope apple comes up with a solution. i dont want to be copying large tv show files to the server at anything less than what i was getting before
edit: i just looked at the logs of previous connections with servers on the mac and i found there was a difference between how i mounted this server recently and it a while back. recently i had been trying to connect using smb://n5200 and in the past before snowleopard it had been smb://N5200. I tried once again to connect using smb://N5200 and it works flawlessly (for the moment). im going to keep trying to copy different files to see if its "fixed". perhaps the introduction of snowleopard made the OS more picky about capitals.
i shall keep you informed
Message was edited by: nairdajun

How does I resize a pdf file page using Acrobat Pro?

In Acrobat Pro, how can one resize a pdf file page (21.38'' x 26.75'') into one measuring 6'' x 9'', to be submitted as the trim size? Is there a feature that allows this to be done? How does one set all print options from the Application print dialog box to enable one to adjust the dimensions of any customized file page?

I want to scale the 21.4'' by 26.8'' content down to one that can be fitted inside a 6'' by 9'' book.
I have this pdf that was created from the InkFlow app, and I'm using Acrobat Pro to merge three files into one (about 300MB), which I needed to submit to Amazon's CreateSpace, but they needed the trim size of 6'' by 9'', while the pdf is 21.4''' by 26.8'', and I can't amend the source file size of the InkFlow files.
I tried fiddling with the Crop and Print options, but I'm unable to resize the pdf to match the trim size. The problem on my side isn't so much on printing but to resize the pdf file page to 6'' by 9'' to satisfy Amazon's requirement for their trim size. Could this be done with Acrobat Pro? The message that appears is: Full print options of Acrobat Pro, set all print options from the Application print dialog box. Thank for the help.

Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

Hello,
I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes.
I've been receiving these errors at boot;
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          11/10/2009 7:51:03 AM
Event ID:      4
Task Category: Logging
Level:         Warning
Keywords:      Session
User:          SYSTEM
Computer:      herbt-PC
Description:
The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>4</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>1</Task>
    <Opcode>10</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-11-10T12:51:03.393985600Z" />
    <EventRecordID>28</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="164" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>herbt-PC</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">ReadyBoot</Data>
    <Data Name="FileName">C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl</Data>
    <Data Name="ErrorCode">3221225864</Data>
    <Data Name="LoggingMode">0</Data>
    <Data Name="MaxFileSize">20971520</Data>
</EventData>
</Event>
The image for PID 4 is listed as System.
My searches have turned up similar events listed but no solutions.
Any help would be appreciated.
Cheers!

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
As suggested above I assume this is a microsoft issue? It has been discussed here and other forums for quite some time. I never have seen a fix? I wish when we received errors of this nature microsoft would tell us what they were. How is this related to superfetch? What is superfetch? Why would superfetch have changed?
BY THE WAY.... Superfetch is on(started) is on automatic and logs on as local system. So this is not the cause of my issue. Also what is readyboot? Does the average computer really know what these programs/services or unique microsoft words/terms are?
System
Provider
[ Name]
Microsoft-Windows-Kernel-EventTracing
[ Guid]
{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID
2
Version
0
Level
2
Task
2
Opcode
12
Keywords
0x8000000000000010
TimeCreated
[ SystemTime]
2010-04-11T14:35:49.829600000Z
EventRecordID
25
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
48
Channel
Microsoft-Windows-Kernel-EventTracing/Admin
Computer
Daddy-PC
Security
[ UserID]
S-1-5-18
EventData
SessionName
Circular Kernel Context Logger
FileName
ErrorCode
3221225525
LoggingMode
268436608
Windows7, Windows, Win7

Recording stopped mas duration for the file has been reached

Has anyone else seen this message, "Recording stopped because the maximum duration for the file has been reached" this is happening on 10.6.2 server and client all updates applied. The File from podcast capture is not saved, it just disappears We are using a Hitachi camera. Any ideas?

This problem has been reported before, here: http://discussions.apple.com/thread.jspa?threadID=1704655 . For some reason, that thread was marked as "answered", even though it doesn't seem to have actually been answered.
I've just experienced the problem myself. I'm using OS X 10.6.3 with QuickTime Player 10.0 (113), capturing audio and video over FireWire from a PAL VHS deck via a Canopus ADVC-55. I'm using the "High" setting to record in QuickTime Player.
Sometimes I'm able to capture indefinitely long amounts of video; sometimes, though, I get a "Recording stopped because the maximum duration for the file has been reached" error after capturing only a few seconds. This variability occurs not only between VHS tapes; it also can occur when using the same source VHS tape (the same parts of the tape, even!) repeatedly.
Apple, this appears to be a QuickTime bug. Please investigate and fix it!

I am trying to use Acrobat Pro version XI to crop my PDF but can't find the "PAGES" tools

I have a 1 page PDF that is 9.5 inches wide with about 1.5 inches of margin. I want to crop off the extra white space and center the image so that it fits on a normal letter sized page. However, I can't find any sort of crop or trim command in Acrobat. When I google cropping a PDF I find references to a crop command that is in some sort of "pages" collection of tools but I don't have any pages menu either. Is there a way to use Acrobat Pro for cropping ? How?
I also have photoshop and have tried importing and cropping there but when I export the image back to PDF format I find that its 10X the size it started. Its important for my purposes that the file be small.

Well it was installed yesterday and I spent hours trying to find the option as virtually the first thing I did when I launched it, so I'm quite sure I would have remembered if I changed it. However it was installed by a push from our corporate software distribution system so maybe that has a way of reconfiguring some options. Why they'd bother is a mystery to me though. Anyway, good to know, thanks again

Can I covert multiple Word Documents into a single PDF using Acrobat Pro

I'm using Acrobat Pro X version 10.1.10...I'm trying to select multiple Word Document files (Mac Version 14.4.3) but when choosing the files, Word Documents I cannot select them as a convertible file format. If I drag them into the conversion box it says they are not a recognised file format....any ideas?

Can you open any WORD file in Acrobat? If not, it is likely a limitation of Acrobat on the MAC. On the PC, you can simply use the Combine option in the file menu to create a new PDF. The conversion of the WORD document uses the PDF Maker option installed in WORD that must work, but this is the same process as opening a DOC or DOCX file directly in Acrobat. There are limitation with the compatibility of various versions of OFFICE and Acrobat that could be another issue you are having, but I don't know the combinations for a MAC. This only gives you some thoughts to consider. Some of the MAC users may be by later to give further thoughts.
The alternative is to create a PDF for each of the WORD files and then use the combine feature to combine the PDFs.

I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud

I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud option in Acrobat. Kindly help me to sortout this problems?

So I tried generating the same PDFs on two other computers that have Acrobat 9 Pro. Results were reproduced. The verdict is:
- complex PDF files (that is, containing cross-references, tables of contents, and bookmarks) generated by Acrobat 9.x Pro are roughly 2-5x larger than the identical file generated with Acrobat 8.x Pro.
- different PDF conversion settings make a negligable difference (less than 10% rather than 70-80%).
- using the "Reduce File Size" or "Optimize PDF" option cuts the file size roughly in half, almost always resulting in a "image downsampling mask" warning message, which requires acknowledgement (that is a problem for batch processing or automation).
- adding an Acrobat watermark to the file cuts the file size roughly in half.
- just using Save As to another filename has no effect on file size.
- generating the PDF in Acrobat 9 with links but no PDF bookmarks still results in the inflated file size.
- generating the PDF in Acrobat 9 without any links or bookmarks results in approximately the same file size as the Acrobat 8 PDF with full links and bookmarks.
It appears that Acrobat 9's manner of adding links is what's bloating the files, and in my case it's probably not related to images or image resolution/print quality. It's a shame, because Acrobat 9 seems to have made some improvements to the Review Tracker interface, and a few other bells and whistles which I haven't really gotten around to exporing yet. But unless I find a way to keep my links and the PDF file sizes comparable to what I was getting with Acrobat 8 Pro, it looks like I'm going to stay with Acrobat 8.

Library has been duplicated, duplicates have no file location. Easy way to remove?

Library has been duplicated, duplicates have no file location. Is there an easy way to remove them?
It's a royal ache going through each one, clicking to see if it will play, getting a 'cannot locate the file' message, delete, etc etc.
Showing duplicates just shows I have a lot to tidy up.
<Edited By Host>

Apple's official advice on duplicates is here... HT2905: How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
tt2

Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?

Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?

Hi Todd,
I haven't heard other reports of this (though there was an issue quite some time ago where deleting pages on this combination of Acrobat/OS was challenging).
Can you please tell me what happens when you try to replace pages? Do you get an error message? Are you able to manipulate pages otherwise (delete, extract, and so on)? Is this issue unique to one file, or does it happen with all PDF files?
I look forward to hearing back from you.
Best,
Sara

Enable Attachment commenting in Reader using Acrobat Pro 8

I am using Acrobat Professional 8. My document consists of a main form that needs one form field filled and many pages stamped. There are also several attachments, each with form fields and/or the need for stamps.
Once released, the document will reside in a central storage program to be accessed by many different users on several PCs. We are currently installing the latest Acrobat Standard package on computers to enable use of our new form(s).
I have 2 questions:
1) Is there a way to create the document (using Acrobat Pro 8) such that Reader can use both stamps and form functions? If so, how about attachments?
2) Is there any way to easily port custom stamps to different PCs? I've tried dropping the "C:\Documents and Settings\nnnn\Application Data\Adobe\Acrobat\8.0\Stamps\....pdf" file into All Users, but Acrobat 8 Pro doesn't see it there. I've also tried dropping the file into user-specific folders, but other users still do not see the stamps.

If you get this:
Invalid "Adobe PDF" printer properties
Do not change spooler settings.
Please select "print directly to the printer" option (from Adobe PDF printer properties "advanced" tab)
Try this:
Find the Acrobat printer in Printers.
Right click on it and select Properties then the Advanced Tab.
For me, "Spool print documents..." was selected.
The Fix: Deselect "Enable advanced printing features".
Click OK.

How do I edit a "fill and print form" using Acrobat Pro XI?

We recently upgraded to Adobe Acrobat Pro, version 11. We have some staff who previously created "fill and print" forms with Adobe Acrobat 10. However, now when they try to use version 11 to edit the form, they receive the following message: This form cannot be edited in Acrobat. Please use Adobe LiveCycle Designer to edit this form.
If I remember correctly, version 10 (or some package suite) use to install LiveCycle along with version 10. This doesn't seem to be the case with version 11. So... How do we obtain LiveCycle Designer? Is it still available to install on a desktop or is it only available in the cloud? Or, preferably, is there a way to edit the form using Acrobat Pro version 11?
I don't work with Adobe forms, so any information you can provide will be extremely helpful. Thanks.

LCD forms can only be edited in LCD. However, Adobe stopped distributing LCD together with Acrobat. You need to purchase it separately now, but if you had a previous license you can get it at a large discount, I think. Try the LCD forums for more info about that.

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

Similar Messages

Maybe you are looking for