I'm using clone replacement ink, getting green and blinking orange indicators. Any way to fix this?

I have an HP DeskJet 5440 printer
I'm using clone replacement ink, getting green and blinking orange indicators. Any way to fix this?

Yes, please replace the cartridge with a HP cartridge for your printer to see if it clears the problem.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

I just bought a iphone 3gs from my friend. when he gave it to me it was in recovery mode. Now everytime i try to Restore it i get the error 1603. is there any way to fix this ? please help !

I just bought a iphone 3gs from my friend. when he gave it to me it was in recovery mode. Now everytime i try to Restore it i get the error 1603. is there any way to fix this ? please help !

iOS: Unable to update or restore
Are you sure your friend didn't jailbreak it?
If so, save yourself a lot of time and trouble - throw it in the trash.

I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

Hello Abdo_Zain,
I would be concerned too if I was not able to gain access to my iPad. If you are unsure what your Apple ID is, you can find the steps in this article:
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625
You can reset a forgotten Apple ID password by going to the following link:
Apple - iForgot
https://iforgot.apple.com
Also, you may be able to skip the step of entering your Apple ID if you are setting up the iPad for the first time.
Thank you for using Apple Support Communities.
Best,
Sheila M.

Apple is asking me to answer my security questions but I can't remember the answers. Also I would reset them but my rescue email is no longer in use and I cannot even remember what it was. Is there any way to fix this mess?

So basically I need to confirm my identity but I can't because I can't remember the answers to my security questions. I scheduled a meeting with Apple, to see if they can fix it. Nod I would just reset them from my rescue email, but I don't know what that email is and it's also no longer in use.
Do you know of any way to fix this?

You won't be able to change your rescue email address until you can answer your questions, you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1: Is there any way of fixing this? I've tried

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
Question 2 (related):
This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
Thanks for reading this.
el7

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

HT4095 I have a downloaded movie that has frozen 90% of the way thru watching it. When I try to launch it I just get a black iPad screen. Any way to remedy this?

I have a downloaded movie that has frozen 90% of the way thru watching it. When I try to launch it I just get a black iPad screen. Any way to remedy this?

This is a Microsoft problem. Contact them for assistance: http://support.microsoft.com/kb/295539
mitch86 wrote:
... However, for work, I still have to use Microsoft.
Are you certain about that? There are many alternatives to Office today. Consider
LibreOffice (donation-supported)
NeoOffice ($10 but older version is free)
OpenOffice (completely free)
In addition to the above I also recommend Apple's Pages ($19.99). All of these options allow you to open, edit, and save Word-formatted documents and spreadsheets. I use OpenOffice and Pages and have been completely Microsoft - free for over a year now. Life is better without Microsoft.

My music library seems corrupted. Nearly every song (431 albums) displays "the song ... could not be used because the original file cannot be found". Is there any way to correct this? Please help, thanks, Kelly

Almost my entire itunes music library seems corrupted. Nearly every song (431 albums) displys "the song ... cannot be used because the original file cannot be found". Is there any way to correct this? Please help!
thanks,
kelly61

Select one of the songs in question and right click, then select "Get Info". On the main dialog page you should see where iTunes thinks the file resides. Then use Windows Explorer to see if the file is actually there. If not, find out where your music is stored.If there is not a correlation between iTunes and reality, go into iTunes and delete all of the files which are not found. Then, in iTunes, select File->Add Folder to Library and select where the music is stored. iTunes will re-add all of the music into your library.

I am trying to update an ipod version 2.2 with itunes but I keep getting an error (-1). Is this an hardware issue according to Apple and if so is there any way to fix this.?

I am trying to update an ipod version 2.2 with itunes but I keep getting an error (-1). Is this an hardware issue according to Apple and if so is there any way to fix this.?

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
If you disabled yuor computer's security software then that indicates a hardware problem,
I would say it is not workth fixint your old. likely a 1G. iPOd.

My iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

my iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

Hi, braidenwhitesidemate.
Thank you for visiting Apple Support Communities.
I would recommend going through the steps in the article below. If the issue persists, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H.

Every time I start up FireFox I get an "Unresponsive Script" message, is there any way to fix this as it's slowing down everything

Here's the message I get:
"A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: file:///Applications/Firefox.app/Contents/MacOS/components/nsBrowserContentHandler.js:291"
I've tried deleting firefox and re-downloading and installing it but it's no help.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

My hotspot is turned off. Other household iphone can turn my hotspot on and don't get asked for a password. Any way to change this?

I have iphone 6, my son has iphone 5c. My hotspot is turned off. My son gets option to tether to my hotspot, if he clicks on that then it remotely turns my hotspot on! Can other iphone users do the same? Worried about other people using all my data.

The password for the hotspot will remembered by the devices that have connected to your hotspot.
If you can't reset the network settings on those devices, which would also delete all network passwords on those, just chafe the hotspot password on your phone in Settings/Hotspot/Wi-Fi password.

When installing itunes on windows 7 i get and error, is there a way to fix this?

I need help. the title pritty much explains it all. I run the setup and select my destination folder, then click install. down the bottem it tells what it is installing. it stops at 'installing apple software update'. it then comes up with a screen saying 'itunes insallation is done. errors acured durin installation. click finish to exit.'

Although you're getting a different error message, perhaps try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I have a problem with the Liquify filter - when I launch it all I get is a posterised green screen of the image - Any tips for fixing this?

Hi
can you help or suggest a remedy for this problem please?

My Liquify effect only shows a black preview area and I cannot use the brushes. | Mylenium's Error Code Database
Mylenium

I could not turn up the volume on my iPad using the volume button on the side. Is there any way to fix this?

I could not turn up the sound (volume) on my iPad 2 using the volume button on the side. This happens after I have reduced the volume to minimum using the same volume button. The volume indicator does not move up at all. Note: it was not on mute, so the issue seems to be the button.

Try this and see if it works.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I'm using FF 5 and tried using the block all images feature. It blocks all images, but also blocks all the images on sites I've specified NOT to block. Any way to fix this?

When I examine the page info it lists it as unblocked/allowed for images, but it's still not showing any. It's ignoring any exceptions I list.
Macbook Pro 3,1, Leopard 10.5.8

You do not specify whether to block or show a specific image.<br />
You specify a domain when you block an image and all images from that domain are blocked.<br />
You can't use this to block a specific image.
You can look at Adblock Plus.
* Adblock Plus: https://addons.mozilla.org/firefox/addon/adblock-plus/
You need to subscribe to a Filter list (e.g. the EasyList).
* http://adblockplus.org/en/subscriptions
* http://adblockplus.org/en/getting_started

I'm using clone replacemen​t ink, getting green and blinking orange indicators​. Any way to fix this?

Similar Messages

Maybe you are looking for

I'm using clone replacement ink, getting green and blinking orange indicators. Any way to fix this?