I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.

I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic." Comcast tells me server is not down all other network activity is fine. WHat's up with this?

Starting earlier today, this also became my problem - can receive but not send in Entourage. The account settings are correct in Entourage - I even created a new account. My Mac running 10.7.5 won't read the original Office : MAC 2008 disk, so I can't do a fix or reinstall from the disk.
This is not an issue if I log onto the Comcast site.
And so, I started using Mail but, unlike Entourage, Mail won't import my Entourage info.
Argh... :-(

Similar Messages

The client timed out waiting to connect to the Essbase Server using TCP/IP

Hi,All
When I deploy the HPCM application to essbase, i received the following message below in the log file hpm.log
2009-02-20 13:34:50,389 [Thread-115] ERROR com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator: error setting measures dimension member properties
com.hyperion.profitability.data.mdb.essbase.MDBException: Error setting member property share option to store_data for member: D0900SB
     at com.hyperion.profitability.data.mdb.essbase.MDBMember.setShareOption(MDBMember.java:413)
     at com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator.setMemberProperties(CubeGenerator.java:1232)
Caused by: com.essbase.api.base.EssException: (1290001): Network Error [10061]: Unable To Connect To [hypeion:32776]. The client timed out waiting to connect to the Essbase Server using TCP/IP. Check your network connections. Also please make sure that Server and Port values are correct
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOlapMetaDataService.ex_olap(Unknown Source)
And the Essbase service is up.
Pls help!
Shen.

If you are installing on Windows, there is a limitation in the default configuration of TCPIP. I wrote about it, and included the steps to fix it, on my blog at http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html.
Note the error number you reported is slightly different than what I write about in the blog, but I believe I have seen this error fixed by the blog steps..
Tim Tow
Applied OLAP, Inc

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

CECORBACommunicationAdapter.request() Throwable - The request timed out

Hi,
i am new to BOSDK. i don't have any knowledge on this.
i am getting the below error.
CECORBACommunicationAdapter.request() Throwable - The request timed out because there has been no reply from the server for 600,000 milliseconds.
i am using the below code:-
IReportAppFactory oFactoryRAS = (IReportAppFactory)oEnterpriseSession.getService("RASReportFactory");
     System.out.println("getting info object3" + oFactoryRAS);
     ReportClientDocument oReportClientDocument = oFactoryRAS.openDocument(oReport, 0, Locale.ENGLISH);
     System.out.println("getting info object4" + oReportClientDocument);
     //Retrive the PrintOutputController to export the report to a ByteArrayInputStream
     PrintOutputController oPrintOutputController = oReportClientDocument.getPrintOutputController();
     System.out.println("getting info object5" + oPrintOutputController);
     //Set the export options and format.
     ExportOptions oExportOptions = new ExportOptions();
     ReportExportFormat oExportFormat = ReportExportFormat.characterSeparatedValues;
may i know the reason.
please do the needful.
Thnaks in advance.
Regards,
Purushotham

Copy the clientSDKOptions.xml file over to Linux, make it accessible to your Java process, then specify the directory path where the file is found (not file path) using the Java System property "ras.config".
Then strace the Java process, to ensure your app is accessing the xml file correctly in the expected location.
Sincerely,
Ted Ueda

ITunes could not connect to the iPad "Micah's iPad Air" because the device timed out.

After using my ipad air for the last week, I plugged it in for the first time to back up some videos. I get this message: iTunes could not connect to the iPad “Micah's iPad Air” because the device timed out. Any ideas?

Eject your iPad if you haven't already done so. Quit iTunes and restart your computer. Reboot your iPad and then try again, use another USB port on your computer, of you have another free port available,
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Publishing to YouTube Failed: The request timed out.

Why do I get "Publishing to YouTube Failed: The request timed out." when trying to load to YouTube. It doesn't happen all the time, just once in a while but it's been happening everytime for the past week!!
I am using the pre-set drop down feature - Share to YouTube.
Help! Thanks.

Just trying the upload from the desktop: 'Uploading your video. 2616 minutes remaining.'
Am also doing another export using H264 to see if that is quicker. It's only 15mins of footage.

Publishing to Vimeo Failed: The request timed out.

Why am I getting this error message on Final Cut Pro X: "Publishing to Vimeo Failed: The request timed out."? any help is great, thanks.

That would suggest a network problem. It may be transient, so try again in a few hours. If it does not work, try trashing your preferences. In the meantime, there is always a workaround: export a master file, upload using the vimeo site.

Connect iPad to MAC computer and get this message: iTunes could not connect to the iPad because the device timed out. ??

Connect iPad to MAC computer and get this message: iTunes could not connect to the iPad because the device timed out. What is the likely problem???

Eject the iPad, quit iTunes, restart the Mac and reset the iPad and try again. Use another USB port on the Mac if you have a free one to use.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons and let the iPad start up.

Itunes tell me the device timed out . I'm not understand what's mean

itunes tell me the device timed out . I'm not understand what's mean
And not connect with my ipad

Hello mohamed abdo,
The article linked below provides some useful troubleshooting steps that can help resolve this issue.
If the USB communication to your iOS device isn't working properly, you may see one or more of these symptoms when attempting to sync your iPhone, iPad, or iPod touch:
An alert messages indicates "iPhone has timed out" during syncing.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Cheers,
Allen

My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?

My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?

Hello, thank you for your prompt answer. I did have an idea that Home sharing might be the answer but could not quite figure out how to do it. I have enabled home sharing in my iTunes account, put in username and password, clicked on creat etc. But the homs sharing icon doew not appear in the left side of iTunes. So I got stuck. Any further ideas?

Checking for updates an error has occurred the request timed out

Whenever I try to check for an update to my software on my computer I get this message: "an error has occurred, the request timed out."
I have not been able to have a software update in many months. Any suggestions on how to fix this?
Thanks,
David

Quit all applications
Hold option key down and click the "Go" menu in the menu bar.
Select "Library" from the dropdown.
Library > Preferences
Look for the file com.apple.appstore.plist and move it to Trash.
Restart the computer.
Source:https://discussions.apple.com/message/20445064#20445064

I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102) "

I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102)" I have tried everything , I've been told its my ISP but I have tried using differenet internet to attempt the updates. Like I said all other software updates fine its just apple software

http://www.apple.com/support/mac/app-store/contact.html?form=account

FCP to YouTube - 'the request timed out'

Hi guys, here's my question: I uploaded a video to YouTube from final cut pro two days ago to a friend's channel. Today, I tried uploading the same video to my own channel, but in FCP it's freezing at 50% upload. I get this message: Publishing to YouTube failed - the request timed out. Any thoughts on this?
I don't think it's to do with the duplicate video because YouTube allows duplicate videos as far as I know. I also slightly changed the size.
In the past, I've been able to upload seamlessly from FCP to YouTube, so I have no idea why it's not letting me now.
Many thanks for your help,
Brian

If you don't have Compressor, check the Shared Items folder in your event. Open it in QuickTime. If it plays OK, upload that file using the YT uploader.
Good Luck.
Russ

IPhone/iPad connection error after first login ok: The request timed out. (-1001)

Hi
I have installed SAP 9.0 PL 12, DI API all version, Integration Component of the SAP 9.0 PL12.
On my iPhone I have the 1.10.1 version of the app SAP.
I followed the directions provided in the note (also in 1602674) and in the forum, but nothing.
I start my PC (server with integration installed), do all the tests possible dall'integration admin and I always correct results.
Start app from my iphone, it connects to my DB but.... after a few minutes I get the error
"Connection Failed - The request timed out. (-1001)"
and then throws me out of the db.
If I try to reconnect, re-entering the password I have always the same error.
To reconnect, I have to restart the PC and the situation repeats itself (is the first logon, then I get the error and I can not reconnect).
Can anyone help me?
THANKS
NL

H Thusar
Update: I only changed the startup type of the service DI Proxy, Event, Integration, and instead of putting 'Automatic' I selected 'Automatic (Delayed Start)'.
I rebooted the server and I was able to connect the iPhone via app to my DB: I was about an hour, I created BP, made changes, displayed report.
I then did the logoff.
I tried to reconnect but nothing is returned the error 'Connection Failed - The request timed out. (-1001)'.
Even after restarting the server again, the app connects after about two minutes I get the error 'Connection Failed - The request timed out. (-1001)' and is no longer relates only after you restart the server.
Help
NL

QT to MobileMe: "The request timed out"

I am unable to upload a video from QuickTime to MobileMe. It says the request timed out.
The video was shot using a iPhone 3GS, then saved with iPhoto and opened with QuickTime.
I go to Share -> MobileMe Gallery.
The video is a little bit over 10 mins, 268Mb.
Thanks.

Add me to the list. 76MB .mov file, I also asked it to same an iPod/iPhone version. (Mine was a slideshow exported from Aperture 3 as 720p HD, then opened in QuickTime X to "Share." Sharing starts with about 12 minutes.

I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.

Similar Messages

Maybe you are looking for