I'm using iphoto version 8.1.2., when I try to upload pics to another web site my pics aren't showing up. What could be the problem?

I'm using iphoto 8.1.2.. When I try to upload pics to another web site the pics aren't showing up. There is nothing there to choose from. What could be the problem?

We'll need as full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on. So, step-by-step how do you go about this uploading?

Similar Messages

HT1338 I have version Mac OS X 10.5.8. I no longer get software updates. What could be the problem?

I have version Mac OS X 10.5.8. I no longer get software updates. What could be the problem?

No problem. You have to pay for the next upgrades, just like you paid for the last one.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

A number of imported photos from iphoto in imovie project all show the same image whilst the preview before dragging them in is correct. What could be the problem?

A number of photos from iphoto used in imovie project all show the same image when playing back. The previw when clicking and dragging them and also the pictures in the storyline. Yet when playing the clip a previous immage keeps on appearing. What could be the problem?

You created a mess and there is no solution - with the actions you have taken those photos are gone unless you have access to them from some other source - they existed in two place - in your iPhoto library and on your backup drive - you have traded the backup drive and restore an earlier iPhoto library so all you have is what you have
LN

I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 v.3. What could be the problem, how ca

I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 version 3. I can open Internet Explorer, but that's not my default browser, so I have no problem with the Internet connection.
What could be the problem, how can I restore my browser without losing my bookmarks, settings, etc?
== Operating system ==
windows XP

If you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]]. Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Update Firefox, see [[Updating Firefox]]

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

HT1454 I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem

I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
i am getting the same error with my rf transmitter that i use in my car

- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!

I have upgraded to Yosemite and also updated the iPhoto application to version 9.6. I am no longer able to send a photo from iPhoto via email. I get an error message saying the server is not responding. But, when using the same server in Mail, I can attach the photo and send it. My wife is using the older version of iPhoto and it works fine.
I have checked the settings for the outgoing server, etc. and the Mail settings match those in iPhoto.
Could this be due to either the Yosemite upgrade or the iPhoto upgrade?

This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
https://appleid.apple.com
Click "Manage Your Apple ID"
Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
Click Password and Security in the left column
Click Generate an app-specific password
Enter iPhoto as the name of the app
Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
And...voila' (I hope)

The VI of I2C driver for reading and writing registers was functional in 6.1 but that same VI is not working for 7.0 & 7.1 version. WinIO is also used in generating the dll as OS is Windows2000. What could be the problem?

THIS IS THE CPP FOR READ. sIMILAR vi WAS MADE FOR WRITE
Attachments:
I2C_Read.cpp ‏7 KB
I2C_Read.h ‏2 KB
I2C_Exe.h ‏1 KB

HI,
I'm not familiary wiht the WinIO functio that you are using here but there are a couple of thisngs to watch out for when doing low-level access.
The most common problem with low level IO functions is that if they were created for Win9x, they will not work under Win NT/2000/XP. NT based OSes require you to have kernel access to do any low level communication. Make sure that the WinIO library that you are using is aupported under Win2K.
Since you have the code for the dll available, you could attach LabVIEW as an external process in your C compiler and debug the dll; this can helps you track down the exact function that is failing.
Just my 2 cents.
Regards,
Juan Carlos
N.I.

After the upgrade it's impossibille to use search engines, everytime firefox stops working/reacting. What could be the problem?

Als ik gebruik maak van een zoekmachine, krijg ik wel de resultaten, maar is het niet mogelijk om een pagina te openen. Firefox reageert dan niet meer. Het maakt niet uit welke zoekmachine, bij iedere gebeurt dit. Dit is direct na de upgrade begonnen. Via een andere webbrowser is het wel mogelijk om door te klikken. Wat kan hiervan de oorzaak zijn?

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

TS3718 Facetime: I can hear the caller but not see them. They can hear and see me. What could be the problem. I am using an I-Pad 2 updated with OS7.

When receiving a Facetime call, I can hear the caller but can not see them. They can hear and see me.

Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

My HDD crashed and I had to reinstall my boot and programmes on a new HDD. I managed to recover my library.itl. How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.

My HDD crashed and I had to reinstall my boot and programmes on a new HDD. I managed to recover my library.itl. How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.

It should be like the very first time you synced your phone with I-Tunes. It will notice you haven't synced before and just copy everything from your phone into I-Tunes. It shouldn't delete anything from the phone, at least it never has for me. It just puts a copy of everything into I-Tunes and even if you delete an app for example from your phone and you decide you want it back later, you can just go back into I-Tunes and copy it back over. Hope this helps.

I have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??

i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??

Hi
Did You ever use - iPhoto ?
Did You may be direct iPhoto to a different Photo Library
As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
Do - When no other program is running that might interfere
• Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
• Now iPhoto let's You select Photo Library
• Select the one in Your Account / Home folder / Pictures ! !
• Then iPhoto should start up OK
• Now Quit iPhoto
• START iMovie
Does it still hangs - then I would suspect - iMovie Pref. file
If it Run's OK - Then HURRAY !
Yours Bengt W

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

Note that iWork for iCloud is only designed for PCs and Macs > http://support.apple.com/kb/HT5779
To access to your iWork documents on the iPhone, install Keynote, Numbers or Pages from the App Store

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error. I am running Mac OS 10.10.1. This only started happening when I installed the update of Adobe Acrobat.

Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave

Dear all, I am using Safari Version 5.0.6 (5533.22.3) but I cannot read any Nepali or hindi text. It shows sort of box sign "द". Please guide me to fix it, I will really appreciate your help.

Dear all, I am using Safari Version 5.0.6 (5533.22.3) but I cannot read any Nepali or hindi text. It shows sort of box sign "द". Please guide me to fix it, I will really appreciate your help.

gyanu1812 wrote:
This is the snapshot of an email that if you have sent it to me.
No, that is the snapshot of my posting in this forum. Here is a picture of my sent message. Are you not getting my emails sent directly to you?

I'm using iphoto version 8.1.2., when I try to upload pics to another web site my pics aren't showing up. What could be the problem?

Similar Messages

Maybe you are looking for