I'm using Keynote '09 for Mac and none of my imported audio or video will play sound.

The sound in Inspector is turned up all the way as well as the volume on my Mac. Any ideas where I'm going wrong?

1 - test sound is enabled and working on your Mac by playing a sound file in iTunes, Finder or going to youtube and play a video
2 - if that works open a new presentation in Keynote containing one slide only, place the sound file on the slide then click the play button to play the presentation
3 - if that works, test the sound file in Keynote that was causing problems in edit mode:
double click the sound file if its on a slide
click play in Inspector > Sound track if its in the soundtrack well
4 - if that works, run Keynote in Play mode
5 - if that doesnt work, delete the sound file in Keynote then place it back again

Similar Messages

In using MS Word for mac, and using track changes, and I send a copy, the recipient cannot see the track changes, nor do they show up on the printed copies, even though I highlight show changes in print

In using MS Word for Mac, and in using Track Changes, when I send an email with the changes, the recipient cannot see the highlighted changes, nor do the printed pages show the highlighted changes, even though I have checked "show highlighted changes"

In using MS Word for Mac, and in using Track Changes, when I send an email with the changes, the recipient cannot see the highlighted changes, nor do the printed pages show the highlighted changes, even though I have checked "show highlighted changes"

How do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled.

Using outlook 2011 for Mac and iCloud

Hello all,
I am starting a new job and the office uses Outlook 2011 for Mac. I am looking for a calendar solution so that I can use the invitation features in Outlook, but have my calendar available on my iPhone and iPad.
I have searched on these forums and it seems that Outlook 2011 is not compatible with iCloud. So for a workaround, I wonder if there is a good (or, better yet, excellent) calendar app for iPhone and iPad that will sync with the Outlook calendar on my Mac?
btw all devices are running the latest OS.
Thanks!
Ella

jan2011 wrote:
Thanks, I had come to the same conclussion!
So now I will just use ical.....
How do I merge all my calendars into one calendar?
Copy all events on to just one calendar and use that. Remember to put it in the iCloud account and the On My Mac account.

Keeping Gmail email addresss and using Outlook 2011 for Mac and Exchange

Hi,
we use gmail for email at present with Outlook on a Mac. Having found that contacts and calendars cannot be synched between Oulook for Mac and Gmail I want to use exchange as a means of getting this sync working between my iPhne, iPad and OSX calendar and
contacts.
We actually want to continue with our gmail addresses (because it's too painful to change to anything else). I understand that gmail can forward messages to Exchange and presumably to be read in Outlook for Mac. How do we use Outlook for Mac and Exchange
to send emails such that they are sent using our gmail email address.
I.e people are not aware of what is going on in the background - they sent to our gmail address and receive a reply from the gmail address
Many thanks
Mike

Good luck with that.
You're not going to like this answer, but you should let Exchange be your e-mail system. Move off Gmail to Exchange on-premises or Online.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Invoice Posting using INVOIC02 Idoc for PO and Non-Po based invoices

Hi All,
We have a problem regarding posting Invoices using Idocs.
We have po and non-po invoices coming frm thirdparty in the form of idoc files.
We need a clarification whether Invoic02 idoc can handle both Po and Non Po Based invoices or threre are seperate idoc types or message types for Po and Non Po Invoices.
Could any one give some inputs on Partner Profiles also for this senario.
Please kindly reply as early as possible.
Regards
Anil Kumar K

Hi
I Got your name from this site.I would be very thankful if you can help me here.I am designing a EDI based invoice LIV.Is it possible to post some charges which are without PO reference but are coming in Vendor Invoices.Is it possible to post these kind of charges with EDI message INOIC01 or we have to post through FI posting.If possible through EDI in which segment of IDOC we will enter these charges with amt.Also is it possible to post credit memo also with EDI
Thanks
Sanjeev

Using Outlook 2011 for mac and syncing blackberry very slow

I just bought 2 pcs of Mcabook pro. one for me and second for my cousin. we both have same office usage.i have installed office 2011. i use contacts / events / tasks of outlook and sync it with my blackberry curve. previously i was using Windows OS and i am so much used to it with its easy functionalities. Since last 15 days i have not done any work in my office as all time i am just involved in setting up one or another thing in my Macbook. i am really so much fed up and frustrated that i am thinking of switching back to Windows. i have some current issues like
Airport disconnects automatically anytime. after then i have to restart the system that is the only way. it shows as connected but i dont find my home network or internet. after restarting it works !!! it happens 4-5 times in a day...
Sync with blackberry is very slow. i do have Approx 2500 contacts / 300 tasks and 10-15 events. but it takes approx 10 times more time than i was doing with Windows.
in the blackberry desktop manager there is only one option of syncing i.e. Two way sync. what if i only want to transfer data from Macbook to Blackberry or from Blackberry to Macbook?
data sync is not perfect also. every time some entries goes missing.
i want to use ical for events and tasks.. but i dont find List view for events which is not convinient.
i have my e mails in Outlook 2011 for mac. what if i want to transfer my mail to mail for mac?
i will be obliged if anyone can help and show that my INR 70000.00 * 2 is not wasted... Frustrated Really...

Good luck with that.
You're not going to like this answer, but you should let Exchange be your e-mail system. Move off Gmail to Exchange on-premises or Online.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

I have Firefox 7.0.1 for Mac and there is no "Import" under File menu that allows me to import bookmarks.

I am using Firefox 7.0.1 on my Mac OS 10.7.2, and there's no "Import" option on the File menu so I can import my bookmarks from Safari.

"Bookmarks > Organize Bookmarks" has been renamed to "Show All Bookmarks" in Firefox 4 and later.
See also:
*https://support.mozilla.com/kb/how-do-i-use-bookmarks

I am using Adobe Acrobat XI Pro for mac and I have problems importing a document through my scanner

I go to
*) file
*) create
*) PDF from scanner
*) Acrobat Scan window opens with my scanner: CanoScan LiDE200
*) As soon as I press the program crashes
I also tried to get the paid support number but I can't find it anywhere on the adobe site.

Hi Martin,
Was it working fine for you before?
Is Acrobat updated to the latest version 11.0.10?
The paid tech support number is: 8006423623
Regards,
Rave

Before I transfer files from my PC to the new imac should I load office for Mac and parallees? Will this mean I have to open the new account on my imac first and thus have two user accounts when I transfer the PC? I would prefer to only have one account.

IIt was in my mind to load office then transfer. After to load paralels and transfer my windows system. I have a new copy of office for Mac plus paralels PC to Mac transfer version 8. As this is my first mac (I have ipads and iphones) I am unsure of what to do. Also to confuse matters I use a windows laptop as my sync machine for the phones and ipads (i do have a cloud account with backup) can I transfer both machines to my new imac? I will have a 1tb fusion drive + 2tb time capsule although I only have less than 400GB of data on both machines. Hope this is not too confusing for everyone but I am looking forward to sorting this mess out by just using the one machine.

Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant. If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

Why are the themes in Keynote for Mac and iOS still so different?

Hi guys,
I love Keynote for Mac and I would love to love Keynote for iPad, but as you all know there are many shortcomings. One thing I just can't grasp why Apple still makes the basic themes so different between the two platforms. For the last years I always used Gradient theme on the Mac for my presentations. Whenever I want to play a presentation on the iPad I get the usual warnings (although I basically never use anything fancy in my presentations). Obviosly this is annoying, but what I don't get at all:
1. Why do they use as a standard for the same theme different fonts and font sizes (Gill Sans 42pt on Mac vs. Helvetica 38 pt on iPad)
2. Why does Keynote has a inconsistent behaviour between Mac and iPad in the most simple functions??
- When I add a few bullet points on the Mac the font size is not changed but you get an indicator (plus sign) at the bottom of your text box to tell you that you ran out of space
- When I do the same on the iPad the font size gets adjusted automatically to fit in the text box.
I am not expecting that every little fancy things translates perfectly between Mac and iPad but that those most simple things are inconsistent is very irritating.
Well, that actually feels better now that is off my chest
What do you guys think about that??
Alex

Nobody here can tell you why Apple does things the way it does them, but you can tell Apple how you would like things to work at
http://www.apple.com/feedback

How to format an external drive for mac AND pc use

i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
Look at this page for more information on a dual partition drive for Mac and Windows.
http://macosxhints.com/article.php?story=20030613121738812
iFelix

How to format external drive for mac AND pc use

hi
i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

There are a couple of disadvantages with formatting a
disk as FAT32. Firstly, there is a limit on the file
size for FAT32. I think it like 2 GB so if you
capturing video the results will probably not fit
into this file limit. Secondly FAT32 will not be
bootable. I alway clone my system to a backup disk as
bootable. That way if anything goes wrong with my
system, I can just boot from my backup disk and fix
it.
The problem with doing this though is that the drive will not be usable with Windows (which was in the original posting) unless you use the third party MacDrive software on the PC.
iFelix

How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

Sorry - confusing - My question has NOT been solved yet - can anyone help?

How to partition my drive for Mac and XP use? from a novice

I would like to use my MacBook Pro for both Mac ad PC programs (Office and others) and hear that I can partition the drive. How is the best way to do that? Also I have an external Seagate FreeAgent GoFlex external drive to set up that supposedly can back up both Mac and PC without formatting each time. Do I have to partition the drive first? Do I use Time Machine?

Is it your intent to run Windows programs on your computer? If so then this is more than simply a partitioning exercise.
In order to use an external drive on both Macs and PCs there are two options. Option One is to partition and format the drive MBP and FAT32, respectively. OS X can read/write a FAT32 formatted drive. However, due to filesystem differences some features of the OS X filesystem are not supported by FAT32, so FAT32 is not the best choice for transferring OS X documents, but would be fine for transferring Windows documents.
Option Two is to partition the drive using GUID then creating two partitions. One partition is formatted Mac OS Extended, Journaled and the other partition is formatted FAT32. Each partition can be used for the data from the appropriate platform.
TM is not a file transfer program, cannot be used for Windows documents, and does not work on Windows.
If you wish to run Windows on your Mac then see the following:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows. You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I'm using Keynote '09 for Mac and none of my imported audio or video will play sound.

Similar Messages

Maybe you are looking for