I'm using the 7344 to control a wire bending machine implementing both the motion and digital 24V I/O when it only accepts 5V. Any suggestion?

I'm intended to control a machine wich was controled by a CNC and a PLC. My job is to substitute them by a PC with a 7344. The 7344 only has 5V I/O and I need 24V I/O to get this machine to work (24V relays, 24V I/O to the motor driver, etc). Can anyone tell me what converters/drivers to use?

Norick,
We have a solid state relay solution so you can convert the TTL signal to a 24VDC that you are looking, we use an interface called SSR Backplane that has modules (is configurable) selectable from digital input or output (3-60VDC) as well as others. All you need is the motion cable SHC68-C68-S, the cable adapter for SSR backplanes, the SRR backplane and the corresponding module you want. Special notes to watch out is that the backplane requires voltage supply (check the manual) and you can select from the 8, 16 or 24 channel configurations, 32 is not supported. The manuals have the information on which port access which relay. If you you have more questions after looking on this links that I included feel free to give us a call.
SSR Series Backplanes
SSR Series Modules
SSR Series Modules and Backplanes User Guide
68VHDCI-50F SSR 8,16,24 Channel Cable Adapter
68VHDCI-50F SSR 8, 16, 24 Channel Cable Adapter Installation Guide
186380-02 or -0R5(SHC68-C68-S)
Best Regards,
Nestor Sanchez
Motion Control Support
National Instruments
Nestor
National Instruments

Similar Messages

HT204053 Enter the Apple ID you want to use for iCloud in Control Panel Network Internet iCloud. Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes iTunes Store.

Enter the Apple ID you want to use for iCloud in Control Panel > Network > Internet > iCloud.
Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes > iTunes Store.

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

I use a brower to control a VI ,but what display in the brower is only a HTML,and I can not control it.

I want realize remote controling.So I use a brower to control a VI ,but what display in the brower is only a HTML,and I can not control it.

> I use a brower to control a VI ,but what display in the brower is only
> a HTML,and I can not control it.
>
> I want realize remote controling.So I use a brower to control a VI
> ,but what display in the brower is only a HTML,and I can not control
> it.
You don't say what version you are using, but LV6.1 added remote control
of panels.
If already using LV6.1, look it up in the help and try out the examples.
Greg McKaskle

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

Hello Cgifford,
Welcome to National Instruments Forums.
To output your signal to the PFI lines,
you can use external connectios between OUT0 and PFI lines. You can also use
the backplane to do so by routing into the same RTSI line.
1)
On the SCOPE and FGEN, the name of the
terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
need to route the signal using the property:
You can also use the DAQmx route signal which perform the same opperation.
2)
This will depend on the frequency of
your pulse train. If this is lower than about 10 ms, then you can probably
place this on a loop and start and stop the acquisition every time. If the
frequency is higher than this, you will have to use:
- Scripting on the FGEN side (read more)
- MultiRecord Fetch (more information in the scope help file
section “Acquisition Functions Reading versus Fetching”).
3)
The short answer is yes. The longer one
might depend on how tight you need the synchronization to be (us, ns, ps). For
very tight synchronization, you should look into here.
Message Edited by Yardov on 06-18-2007 03:14 PM
Gerardo O.
RF Systems Engineering
National Instruments
Attachments:
property.JPG ‏7 KB

How to? switch between the following mission control preference "group windows by application" on the fly? OR have both readily available

Is there any way to switch between the following mission control preference "group windows by application" on the fly? I would like to turn this feature on and off quickly. OR have both readily available?
If osx 10.9 does not support this, does any one know if automater can be used to creat a short cut to turn this preferance on and off?
Current solution (not much of a solution)
I currently added the preferance control icon for mission control on my dock.

4u2nv247 wrote:
Current solution (not much of a solution)
I currently added the preferance control icon for mission control on my dock.
Do you mean the general System Preferences icon? ...If so, it's possible to put the icon specifically for the Mission Control pane in the Dock:
I'm on Mountain Lion and that Preference Pane is in: Macintosh HD > System (not Users) > Library > PreferencePanes > Expose.prefPane
...Drag that Expose.prefPane to the right-hand side of the Dock, say, next to the Trash. Then you can simply click on the resulting Expose Prefs icon in the Dock to open its Prefs panel.

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

HT5621 I have changed my apple id recently and the changes have been reflected on my iPad for both the apps store and the iCloud, however, my iphone still insist on using my old apple id for the iCloud while the app store is fine. how can i correct the pr

I have changed my apple id recently and the changes have been reflected on my iPad for both the apps store and the iCloud, however, my iphone still insist on using my old apple id for the iCloud while the app store is fine. how can i correct the problem?
Thanks

Hi Baem_leeds
Welcome to the Support Communities!
If you change your Apple ID you will need to sign in with the new information or password the next time you use an Apple service or feature that uses Apple ID. If you have multiple devices that use features and services that require an Apple ID, you will need to sign in again on each device.
The links below will provide additional information:
Where can I use my Apple ID?
http://support.apple.com/kb/HT5616
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Judy

HT201077 I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

The following is from this Apple Document: iCloud: Photo Stream FAQ
What do I need to use Photo Stream?
To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software:
iPhone, iPad, or iPod touch with iOS 6.0 or later
Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
PC with Windows 8, Windows 7, or Windows Vista (Service Pack 2) and the iCloud Control Panel 2.1 or later for Windows
Apple TV (2nd generation) with Software Update 5.1 or later
You can still use Photo Stream without Shared Photo Streams if your devices meet these requirements:
iPhone, iPad, or iPod touch with iOS 5.1 or later
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
PC with Windows 7 or Windows Vista (Service Pack 2) and the iCloud Control Panel v2.0 or later for Windows
Apple TV (2nd generation) with Software Update 5.0 or later
For complete iCloud setup instructions, visit How to set up iCloud.
You need Mt. Lion in order to use Shared Photo Streams.
OT

Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

Sign out of the iCloud control panel and then back in.

Whenever I run Firfox 4.0, my computer fan runs continuously. I have disabled all plug-ins, and I get the same result. This did not happen with Firefox 3.x, and it doesn't happen with IE 8.0. Any ideas?

Whenever I run Firfox 4.0, my computer fan runs continuously. I have disabled all Firefox plug-ins, but I get the same result. This did not happen with Firefox 3.x, and it doesn't happen with IE 8.0. Any ideas?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

I get redirected to unwanted web sites during searches from the browser ONLY, never from the toolbar. Is this the same malware problem as discribed for redirects from BOTH the browser and the toolbar?

I get redirected to unwanted web sites during searches from the browser ONLY, never from the toolbar. Is this the same malware problem as discribed for redirects from BOTH the browser and the toolbar?
== This happened ==
Every time Firefox opened
== was happening with Internet Explorer, continues with Firefox

Did you do a malware check?
Do a malware check with a few malware scan programs.
You need to use all programs because each detects different malware.
Make sure that you update each program to get the latest version of the database.
http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
(the MozillaZine KB is currently down, so you may need to try again later)

IPhoto project will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process. Christmas gift, really need to get this done, have worked MANY hours on putting it together. Please help!

Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT

HT4528 I recently started my iCloud and did the backup feature to store contacts from my phone to my iCloud, and no all of a sudden I don't have any numbers saved. How do I retrieve those contacts from before???

I recently started my iCloud and did the backup feature to store contacts from my phone to my iCloud, and no all of a sudden I don't have any numbers saved. How do I retrieve those contacts from before???

Pleae read this article about using iclouds to store contacts.
http://support.apple.com/kb/PH2576
Good luck friend.

If I buy a iPad 2 in USA, will it work in the UK? If so, does this apply to both the wi-fi

If I buy a iPad 2 in USA, will it work in the UK? If so, does this apply to both the wi-fi

It will work in the UK, though you will need a plug adapter for the charger (you don't need a convertor for the charger).
If you get a 3G version then get the AT&T version as they use micro-sim cards, so you can swap in a UK micro-sim card. The Verizon iPad is CDMA based and doesn't use micro-sim cards, so from a built-in 3G point of view isn't much use in the UK (I'm not aware of any CDMA carriers in Europe).

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

I'm using the 7344 to control a wire bending machine implementing both the motion and digital 24V I/O when it only accepts 5V. Any suggestion?

Similar Messages

Maybe you are looking for